POLY(4-VINYLPYRIDINE)
POLY(4-VINYLPYRIDINE) structure
|
Common Name | POLY(4-VINYLPYRIDINE) | ||
|---|---|---|---|---|
| CAS Number | 25232-41-1 | Molecular Weight | 105.13700 | |
| Density | 0.968g/cm3 | Boiling Point | 225ºC | |
| Molecular Formula | (C7H7N)x | Melting Point | 260ºC (dec.) | |
| MSDS | Chinese USA | Flash Point | 51.7ºC | |
| Symbol |
GHS07 |
Signal Word | Warning | |
|
Interpolymer complexes and polymer compatibility.
Macromol. Rapid Commun. 33(22) , 1933-7, (2012) A reliable method to decide whether two polymers A and B are miscible or incompatible would be very helpful in many ways. In this contribution we demonstrate why traditional procedures cannot work. We propose to use the intrinsic viscosities [η] of the polyme... |
|
|
Encapsulation of TiO2 nanoparticles with poly(4-vinylpyridine) using surface functionalized thiol-lactam initiated radical polymerization.
J. Nanosci. Nanotechnol. 13(5) , 3546-9, (2013) A nanocomposite of TiO2 nanoparticle with an electroactive poly(4-vinylpyridine) (PVP) was synthesized via a simple surface thiol-lactam initiated radical polymerization upon grafting from protocol. This can be achieved through the primary modification of the... |
|
|
Layer-by-layer assembly and characterization of multilayers of a manganese porphyrin linked poly(4-vinylpyridinium) derivative and poly(styrenesulfonic acid-o-maleic) acid.
Langmuir 27(16) , 9880-9, (2011) Multilayers of manganese(III) porphyrin-linked poly(vinylpyridinium) (MnTMPyP-PVPMe) polyelectrolyte and poly(styrenesulfonic acid-o-maleic) acid (PSS) have been assembled on gold, quartz, and indium tin oxide surfaces by a layer-by-layer (LBL) technique. The... |
|
|
Comparative study of the uses of poly(4-vinylpyridine) and poly(diallyldimethylammonium) chloride for the removal of perchlorate from aqueous solution by polyelectrolyte-enhanced ultrafiltration.
Water Res. 45(3) , 1387-93, (2011) An application of polyelectrolyte-enhanced ultrafiltration utilizes cationic polyelectrolytes to electrostatically bind anionic species. The colloid and target anion are then concentrated using an ultrafilter, producing a filtrate with a lower concentration o... |
|
|
Initiated chemical vapor deposition-based method for patterning polymer and metal microstructures on curved substrates.
Adv. Mater. 24(48) , 6445-50, (2012) A simple, efficient, and scalable method for patterning microstructures on curved substrates is demonstrated. Initiated chemical vapor deposition is used to synthesize a thin film that crosslinks upon UV exposure. Polymeric features are defined on glass rods ... |
|
|
Interfacial molecular structures of polyelectrolyte brush in contact with dry nitrogen, water vapor, liquid water, and aqueous electrolyte solution studied by sum frequency generation spectroscopy.
J. Am. Chem. Soc. 132(48) , 17271-6, (2010) Interfacial structures of alkylated polyvinylpyridine (Cn-PVP) brushes with various side chain lengths (n = 2, 6, 12) in dry nitrogen, water vapor, liquid water, and aqueous electrolyte solution were investigated by sum frequency generation (SFG) spectroscopy... |
|
|
Facile synthesis of thick films of poly(methyl methacrylate), poly(styrene), and poly(vinyl pyridine) from Au surfaces.
ACS Appl. Mater. Interfaces 3(8) , 3042-8, (2011) Atom transfer radical polymerization (ATRP) is commonly used to grow polymer brushes from Au surfaces, but the resulting film thicknesses are usually significantly less than with ATRP from SiO(2) substrates. On Au, growth of poly(methyl methacrylate) (PMMA) b... |
|
|
Synthesis of cationic poly(4-vinylpyridine)-functionalized colloidal particles by emulsion polymerization with reactive block copolymer for protein adsorption
J. Colloid. Interface Sci. 381(1) , 137-42, (2012) Graphical abstract |
|
|
The effects of PVP(Fe(III)) catalyst on polymer molecular weight and gene delivery via biodegradable cross-linked polyethylenimine.
Pharm. Res. 29(2) , 500-10, (2012) Crosslinked, degradable derivatives of low-molecular-weight polyethylenimine (PEI) are relatively efficient and non-cytotoxic gene delivery agents. To further investigate these promising materials, a new synthetic approach was developed using a poly(4-vinylpy... |
|
|
A general method to determine ionization constants of responsive polymer thin films.
J. Colloid. Interface Sci. 365(1) , 178-83, (2012) A general method has been developed to determine the ionization constants of polymer thin films based on the stimuli-responsiveness of the polymer. Robust polymer films were fabricated on silicon wafers and gold slides using perfluorophenyl azide (PFPA) as th... |