NYLON 6
NYLON 6 structure
|
Common Name | NYLON 6 | ||
|---|---|---|---|---|
| CAS Number | 25038-54-4 | Molecular Weight | 115.174 | |
| Density | 0.9±0.1 g/cm3 | Boiling Point | 255.0±0.0 °C at 760 mmHg | |
| Molecular Formula | C6H13NO | Melting Point | 220ºC | |
| MSDS | Chinese USA | Flash Point | 102.2±18.4 °C | |
|
Cyclic oligomers in polyamide for food contact material: quantification by HPLC-CLND and single-substance calibration.
Food Addit. Contam. Part A. Chem. Anal. Control. Expo. Risk Assess. 29(5) , 846-60, (2012) Cyclic oligomers are the major substances migrating from polyamide (PA) food contact materials. However, no commercial standards are available for the quantification of these substances. For the first time the quantification of cyclic oligomers was carried ou... |
|
|
Mechanical, thermal and bioactive behaviors of polyamide 6/hydroxyapatite nanocomposites.
J. Nanosci. Nanotechnol. 11(12) , 10644-8, (2011) Polyamide-6 nanocomposites filled with different hydroxyapatite nanorod contents were injection molded. The thermal and tensile properties as well as bioactivity of such nanocomposties were investigated. The results showed that the thermal stabilities of poly... |
|
|
A study of slippage of various knot configurations.
Eye (Lond.) 26(11) , 1491-3, (2012)
|
|
|
Nanofiber-net-binary structured membranes for highly sensitive detection of trace HCl gas.
Nanoscale 4(23) , 7585-92, (2012) This work describes the detection of trace hydrogen chloride (HCl) gas through analyses of the resonance frequency signal from quartz crystal microbalance (QCM) sensors coated with polyaniline (PANI) functionalized polyamide 6 (PA 6) (PANI-PA 6) nanofiber-net... |
|
|
Tough and transparent nylon-6 electrospun nanofiber reinforced melamine-formaldehyde composites.
ACS Appl. Mater. Interfaces 4(5) , 2597-603, (2012) The use of nylon-6 electrospun nanofiber mats as reinforcement with synergistic effect in tensile strength and toughness for melamine-formaldehyde (MF) resin is highlighted in this article. Interestingly, there was a drastic effect of the wetting procedure of... |
|
|
Novel electrochemical biosensor based on functional composite nanofibers for sensitive detection of p53 tumor suppressor gene.
Anal. Chim. Acta 765 , 63-9, (2013) A novel electrochemical biosensor based on functional composite nanofibers for sensitive hybridization detection of p53 tumor suppressor using methylene blue (MB) as an electrochemical indicator is developed. The carboxylated multi-walled carbon nanotubes (MW... |
|
|
Novel layer-by-layer procedure for making nylon-6 nanofiber reinforced high strength, tough, and transparent thermoplastic polyurethane composites.
ACS Appl. Mater. Interfaces 4(8) , 4366-72, (2012) We highlight a novel composite fabrication method based on solution casting, electrospinning, and film stacking for preparing highly transparent nylon-6 nanofiber reinforced thermoplastic polyurethane (TPU) composite films. The procedure is simple and can be ... |
|
|
Temperature and exposure dependence of hybrid organic-inorganic layer formation by sequential vapor infiltration into polymer fibers.
Langmuir 28(44) , 15697-704, (2012) The characteristic processing behavior for growth of a conformal nanoscale hybrid organic-inorganic modification to polyamide 6 (PA6) by sequential vapor infiltration (SVI) is demonstrated. The SVI process is a materials growth technique by which exposure of ... |
|
|
Cellular interactions and stimulated biological functions mediated by nanostructured carbon for tissue reconstruction and tracheal tubes and sutures.
J. Biomed. Mater. Res. A 101(2) , 528-36, (2013) Nylon 6,6 is used for biological applications including gastrointestinal segments, tracheal tubes and sutures, vascular graft, and for hard tissue reconstruction. While it is a relatively inexpensive polymer, it is not widely acceptable as a preferred biomate... |
|
|
Physicochemical characterization of chitosan/nylon6/polyurethane foam chemically cross-linked ternary blends.
Spectrochim. Acta. A. Mol. Biomol. Spectrosc. 105 , 20-3, (2013) Chitosan/nylon6/polyurethane foam (CS/Ny6/PUF) ternary blend was prepared and chemically cross-linked with glutaraldehyde. Structural, thermal and morphological studies were performed for the prepared ternary blends. Characterizations of the ternary blends we... |