poly(methyl methacrylate) isotactic
poly(methyl methacrylate) isotactic structure
|
Common Name | poly(methyl methacrylate) isotactic | ||
|---|---|---|---|---|
| CAS Number | 25188-98-1 | Molecular Weight | 395.32500 | |
| Density | 1.2 g/mL at 25ºC(lit.) | Boiling Point | 499.6ºC at 760 mmHg | |
| Molecular Formula | C12H18N3O8PS | Melting Point | N/A | |
| MSDS | USA | Flash Point | 255.9ºC | |
|
Computed gray levels in multislice and cone-beam computed tomography.
Am. J. Orthod. Dentofacial Orthop. 144(1) , 147-55, (2013) Gray level is the range of shades of gray in the pixels, representing the x-ray attenuation coefficient that allows for tissue density assessments in computed tomography (CT). An in-vitro study was performed to investigate the relationship between computed gr... |
|
|
Hetero diels-alder chemistry for the functionalization of single-walled carbon nanotubes with cyclopentadienyl end-capped polymer strands.
Macromol. Rapid Commun. 34(8) , 672-80, (2013) Single-walled carbon nanotubes (SWCNTs) are pre-functionalized with a pyridinyl-based dithioester to undergo a hetero Diels-Alder (HDA) reaction with cyclopentadienyl end-capped poly(methyl)methacrylate (Mn = 2700 g mol(-1) , PDI = 1.14). Fourier transform in... |
|
|
Non-topography-guided photorefractive keratectomy for the correction of residual mild refractive errors after ICRS implantation and CXL in keratoconus.
J. Refract. Surg. 30(4) , 266-71, (2014) To evaluate the safety and clinical outcomes of non-topography-guided photorefractive keratectomy (PRK) for the treatment of residual mild refractive errors 6 months after sequential intracorneal ring segment (ICRS) implantation and corneal collagen cross-lin... |
|
|
Fabrication of ordered poly(methyl methacrylate) nanobowl arrays using SiO2 colloidal crystal templates.
J. Nanosci. Nanotechnol. 14(6) , 4622-5, (2014) A simple approach is presented for the fabrication of poly(methyl methacrylate) (PMMA) nanobowl arrays over cm2 areas using SiO2 colloidal crystal templates. SiO2 colloidal crystal templates were prepared on a clean glass substrate by self-assembled SiO2 sphe... |
|
|
Modification of Pd-Fe nanoparticles for catalytic dechlorination of 2,4-dichlorophenol.
Sci. Total Environ. 449 , 157-67, (2013) To reveal how different dispersants influence the dispersity and physicochemical properties of palladium/iron nanoparticles (Pd/Fe NPs), we modified Pd/Fe NPs with poly(methylmethacrylate) (PMMA), polyacrylic acid (PAA) and cetyltrimethylammonium bromide (CTA... |
|
|
Micropatterned culture of HepG2 spheroids using microwell chip with honeycomb-patterned polymer film.
J. Biosci. Bioeng. 118(4) , 455-60, (2014) Microwell chip culture is a promising technique for the generation of homogenous spheroids. We investigated the relationship between the structure of the bottom surface of microwell chip and the properties of HepG2 spheroid. We developed a microwell chip, the... |
|
|
Synthesis of carboxylic block copolymers via reversible addition fragmentation transfer polymerization for tooth erosion prevention.
J. Dent. Res. 93(12) , 1264-9, (2014) Dental professionals are seeing a growing population of patients with visible signs of dental erosion. The approach currently being used to address the problem typically leverages the enamel protection benefits of fluoride. In this report, an alternative new ... |
|
|
A nanoscale conical polymethyl methacrylate (PMMA) sub-wavelength structure with a high aspect ratio realized by a stamping method.
Opt. Express 21(7) , 8450-9, (2013) A high aspect ratio conical sub-wavelength structure (SWS) was designed by using rigorous coupled-wave analysis (RCWA) method and was realized on polymethyl methacrylate (PMMA) film using a stamping technique. The silicon template containing a hexagonal array... |
|
|
Formation of poly(methyl methacrylate) thin films onto wool fiber surfaces by vapor deposition polymerization.
ACS Appl. Mater. Interfaces 5(5) , 1548-55, (2013) Chemical vapor deposition (CVD) polymerization is a useful technique because of the possibility of forming very thin film of pure polymers on substrates with any geometric shape. In this work, thin films of poly(methyl methacrylate) or PMMA were formed on the... |
|
|
Synthesis and characterization of the in situ bulk polymerization of PMMA containing graphene sheets using microwave irradiation.
Molecules 18(3) , 3152-67, (2013) Polymethylmethacrylate-graphene (PMMA/RGO) nanocomposites were prepared via in situ bulk polymerization using two different preparation techniques. In the first approach, a mixture of graphite oxide (GO) and methylmethacrylate monomers (MMA) were polymerized ... |