甲基丙烯酸四氢糠基酯结构式
|
常用名 | 甲基丙烯酸四氢糠基酯 | 英文名 | UNII:120GN9C472 |
|---|---|---|---|---|
| CAS号 | 2455-24-5 | 分子量 | 170.206 | |
| 密度 | 1.0±0.1 g/cm3 | 沸点 | 265.0±0.0 °C at 760 mmHg | |
| 分子式 | C9H14O3 | 熔点 | N/A | |
| MSDS | 美版 | 闪点 | 105.6±14.4 °C |
| 中文名 | 甲基丙烯酸四氢糠基酯 |
|---|---|
| 英文名 | oxolan-2-ylmethyl 2-methylprop-2-enoate |
| 中文别名 | 甲基丙烯酸四氢糠酯 | 2-甲基-2-丙烯酸(四氢-2-呋喃基)甲酯 | 甲基丙烯酸氢糠酯 |
| 英文别名 | 更多 |
| 密度 | 1.0±0.1 g/cm3 |
|---|---|
| 沸点 | 265.0±0.0 °C at 760 mmHg |
| 分子式 | C9H14O3 |
| 分子量 | 170.206 |
| 闪点 | 105.6±14.4 °C |
| 精确质量 | 170.094299 |
| PSA | 35.53000 |
| LogP | 1.38 |
| 外观性状 | 液体;Colorless to Almost colorless clear liquid |
| 蒸汽压 | 0.0±0.5 mmHg at 25°C |
| 折射率 | 1.453 |
| 储存条件 | 保持容器密封,放入紧密的出藏器内,储存在阴凉,干燥的地方 |
| 稳定性 | 常温常压下稳定,避免氧化物,光接触 |
| 分子结构 | 1、 摩尔折射率:44.62 2、 摩尔体积(m3/mol):165.2 3、 等张比容(90.2K):398.1 4、 表面张力(dyne/cm):33.7 5、 极化率(10 -24cm 3):17.68 |
| 计算化学 | 1.疏水参数计算参考值(XlogP):1.5 2.氢键供体数量:0 3.氢键受体数量:3 4.可旋转化学键数量:4 5.互变异构体数量:无 6.拓扑分子极性表面积35.5 7.重原子数量:12 8.表面电荷:0 9.复杂度:186 10.同位素原子数量:0 11.确定原子立构中心数量:0 12.不确定原子立构中心数量:1 13.确定化学键立构中心数量:0 14.不确定化学键立构中心数量:0 15.共价键单元数量:1 |
| 更多 | 1. 性状:无色或灰黄色液体 2. 密度(g/mL, ,20℃):1.04 3. 相对蒸汽密度(g/mL,空气=1):未确定 4. 熔点(ºC):未确定 5. 沸点(ºC,常压):178 6. 沸点(ºC 9mmHg):未确定 7. 折射率(nD20):未确定 8. 闪点(ºC):未确定 9. 比旋光度():未确定 10. 自燃点或引燃温度(ºC):90 11. 蒸气压(Pa,20ºC):未确定 12. 饱和蒸气压(kPa, 0ºC):未确定 13. 燃烧热(KJ/mol):未确定 14. 临界温度(ºC):未确定 15. 临界压力(KPa):未确定 16. 油水(辛醇/水)分配系数的对数值:未确定 17. 爆炸上限(%,V/V):未确定 18. 爆炸下限(%,V/V):未确定 19. 溶解性:不能拌和的或难以拌和 |
| 个人防护装备 | Eyeshields;Gloves;half-mask respirator (US);multi-purpose combination respirator cartridge (US) |
|---|---|
| 危害码 (欧洲) | Xi |
| 风险声明 (欧洲) | R10;R36/37/38 |
| 安全声明 (欧洲) | S36 |
| 危险品运输编码 | 3272 |
| WGK德国 | 1 |
| 包装等级 | III |
| 危险类别 | 3 |
| 海关编码 | 2932190090 |
|
~%
甲基丙烯酸四氢糠基酯 2455-24-5 |
| 文献:US2129666 , ; |
|
~%
甲基丙烯酸四氢糠基酯 2455-24-5 |
| 文献:Journal of Organic Chemistry, , vol. 14, p. 1094,1095, 1097 |
| 甲基丙烯酸四氢糠基酯上游产品 3 | |
|---|---|
| 甲基丙烯酸四氢糠基酯下游产品 0 | |
| 海关编码 | 2932190090 |
|---|---|
| 中文概述 | 2932190090 其他结构上有非稠合呋喃环化合物. 增值税率:17.0% 退税率:9.0% 监管条件:无 最惠国关税:6.5% 普通关税:20.0% |
| 申报要素 | 品名, 成分含量, 用途 |
| Summary | 2932190090 other compounds containing an unfused furan ring (whether or not hydrogenated) in the structure VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:20.0% |
|
Fungicidal amounts of antifungals are released from impregnated denture lining material for up to 28 days.
J. Dent. 40(6) , 506-12, (2012) The aim of this study was to investigate the efficacy of a polymeric delivery system impregnated with chlorhexidine or fluconazole against Candida species.Self-cure poly-ethyl methacrylate and tetrahy... |
|
|
Chlorhexidine-impregnated PEM/THFM polymer exhibits superior activity to fluconazole-impregnated polymer against Candida albicans biofilm formation.
Int. J. Antimicrob. Agents 41(2) , 193-6, (2013) Biofilm-associated infections represent a major challenge for biomaterials. Methods to alter the chemical characteristics of biomaterials offer an attractive solution for enhanced microbial control. T... |
|
|
Impregnation with antimicrobials challenge bonding properties and water sorption behaviour of an acrylic liner.
J. Dent. 40(8) , 693-9, (2012) To investigate the effect of impregnation of poly(ethyl methacrylate) and tetrahydro-furfuryl methacrylate (PEM/THFM) polymeric delivery system with chlorhexidine or fluconazole on its shear bond stre... |
| SR 203 |
| EINECS 219-529-5 |
| Methacrylic Acid Tetrahydrofurfuryl Ester |
| Methacrylsaeure-tetrahydrofurfurylester |
| Sartomer SR 203 |
| UNII:120GN9C472 |
| Tetrahydro-2-furanylmethyl methacrylate |
| MFCD00014515 |
| 2-Propenoic acid, 2-methyl-, (tetrahydro-2-furanyl)methyl ester |
| tetrahydrofuran-2-ylmethyl 2-methylprop-2-enoate |
| Tetrahydrofuran-2-ylmethyl methacrylate |
| Tetrahydrofurfuryl Methacrylate |
| 2-methyl-propenoic acid tetrahydrofuranyl-methyl ester |
| Methacrylic acid, tetrahydrofurfuryl ester (8CI) |