1,5-Diiodopentane

Modify Date: 2024-01-03 12:16:52

1,5-Diiodopentane Structure
1,5-Diiodopentane structure
Common Name 1,5-Diiodopentane
CAS Number 628-77-3 Molecular Weight 323.942
Density 2.2±0.1 g/cm3 Boiling Point 264.3±8.0 °C at 760 mmHg
Molecular Formula C5H10I2 Melting Point 9ºC
MSDS Chinese USA Flash Point 123.7±13.9 °C
Symbol GHS07
GHS07
Signal Word Warning

 Names

Name 1,5-Diiodopentane
Synonym More Synonyms

 Chemical & Physical Properties

Density 2.2±0.1 g/cm3
Boiling Point 264.3±8.0 °C at 760 mmHg
Melting Point 9ºC
Molecular Formula C5H10I2
Molecular Weight 323.942
Flash Point 123.7±13.9 °C
Exact Mass 323.887177
LogP 3.83
Vapour Pressure 0.0±0.5 mmHg at 25°C
Index of Refraction 1.604
Water Solubility insoluble

 MSDS

1,5-Diiodopentane (stabilized with Copper chip) Revision number: 6
SAFETY DATA SHEET

Section1. IDENTIFICATION
Product name:1,5-Diiodopentane (stabilized with Copper chip)

Revision number:6

Section2. HAZARDS IDENTIFICATION
GHS classification
PHYSICAL HAZARDSNot classified
HEALTH HAZARDS
Skin corrosion/irritationCategory 2
Category 2A
Serious eye damage/eye irritation
ENVIRONMENTAL HAZARDSNot classified
GHS label elements, including precautionary statements
Pictograms or hazard symbols
Signal wordWarning
Hazard statementsCauses skin irritation
Causes serious eye irritation
Precautionary statements:
Wash hands thoroughly after handling.
[Prevention]
Wear protective gloves/eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
[Response]
if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
IF ON SKIN: Gently wash with plenty of soap and water.
If skin irritation occurs: Get medical advice/attention.
Take off contaminated clothing and wash before reuse.

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:Substance
Components:1,5-Diiodopentane (stabilized with Copper chip)
Percent:>98.0%(GC)
CAS Number:628-77-3
Synonyms:Pentamethylene Diiodide (stabilized with Copper chip)
C5H10I2
Chemical Formula:

Section4. FIRST AID MEASURES
Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Get medical advice/attention if you feel unwell.

Section4. FIRST AID MEASURES
Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. If skin irritation or rash occurs: Get medical advice/attention.
Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Ingestion:Get medical advice/attention if you feel unwell. Rinse mouth.
A rescuer should wear personal protective equipment, such as rubber gloves and air-
Protection of first-aiders:
tight goggles.

Section5. FIRE-FIGHTING MEASURES
Suitable extinguishingDry chemical, foam, water spray, carbon dioxide.
media:
Unsuitable extinguishing Solid streams of water
media:
Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to
from the chemical:generate poisonous fume.
Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions,Use personal protective equipment. Keep people away from and upwind of spill/leak.
protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
emergency procedures: around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
up: material should be promptly disposed of, in accordance with appropriate laws and
regulations.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent generation of vapour or mist. Wash hands and face thoroughly after
handling.
Use a ventilation, local exhaust if vapour or aerosol will be generated.
Advice on safe handling: Avoid contact with skin, eyes and clothing.
A small amount of copper chip is added as a stabilizer. Separation such as filtration
should be taken as necessary.
Conditions for safe storage, including any
incompatibilities
Keep container tightly closed. Store in a cool and dark place.
Storage conditions:
Store under inert gas.
Store away from incompatible materials such as oxidizing agents.
Light-sensitive, Air-sensitive
Comply with laws.
Packaging material:

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls:Install a closed system or local exhaust as possible so that workers should not be
exposed directly. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Vapor respirator. Follow local and national regulations.
Hand protection:Protective gloves.

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Eye protection:Safety glasses. A face-shield, if the situation requires.
Skin and body protection: Protective clothing. Protective boots, if the situation requires.

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state (20°C):Liquid
Form:Clear
Slightly pale yellow - Reddish yellow
Colour:
Odour:No data available
pH: No data available
Melting point/freezing point:9°C (Freezing point)
Boiling point/range:102°C/0.4kPa
Flash point:No data available
Flammability or explosive
limits:
Lower:No data available
Upper:No data available
Relative density:2.18
Solubility(ies):
[Water]No data available
[Other solvents]No data available

Section10. STABILITY AND REACTIVITY
Chemical stability:Stable under proper conditions.
Possibility of hazardous No special reactivity has been reported.
reactions:
Incompatible materials: Oxidizing agents
Hazardous decomposition Carbon monoxide, Carbon dioxide, Hydrogen Iodide
products:

Section11. TOXICOLOGICAL INFORMATION
Acute Toxicity:No data available
Skin corrosion/irritation: No data available
Serious eyeNo data available
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
IARC =No data available
NTP =No data available
Reproductive toxicity:No data available
RTECS Number:SA0425000

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
Fish:No data available
No data available
Crustacea:
Algae:No data available
Persistence / degradability: No data available
BioaccumulativeNo data available
potential(BCF):
Mobility in soil
Log Pow:No data available
Soil adsorption (Koc):No data available
No data available
Henry's Law
constant(PaM3/mol):

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
disposing of the substance.

Section14. TRANSPORT INFORMATION
Hazards Class:Does not correspond to the classification standard of the United Nations
UN-No:Not listed

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Toxicological Information

CHEMICAL IDENTIFICATION

RTECS NUMBER :
SA0425000
CHEMICAL NAME :
Pentane, 1,5-diiodo-
CAS REGISTRY NUMBER :
628-77-3
BEILSTEIN REFERENCE NO. :
1697281
LAST UPDATED :
199701
DATA ITEMS CITED :
2
MOLECULAR FORMULA :
C5-H10-I2
MOLECULAR WEIGHT :
323.95

HEALTH HAZARD DATA

ACUTE TOXICITY DATA

MUTATION DATA

TYPE OF TEST :
Mutation in microorganisms
TEST SYSTEM :
Bacteria - Salmonella typhimurium
DOSE/DURATION :
10 umol/plate
REFERENCE :
MUREAV Mutation Research. (Elsevier Science Pub. B.V., POB 211, 1000 AE Amsterdam, Netherlands) V.1- 1964- Volume(issue)/page/year: 141,11,1984

 Safety Information

Symbol GHS07
GHS07
Signal Word Warning
Hazard Statements H315-H319-H335
Precautionary Statements P261-P305 + P351 + P338
Personal Protective Equipment Eyeshields;full-face respirator (US);Gloves;multi-purpose combination respirator cartridge (US);type ABEK (EN14387) respirator filter
Hazard Codes Xi:Irritant;
Risk Phrases R36/37/38
Safety Phrases S37/39-S26
RIDADR 2810
RTECS SA0425000
Packaging Group III
Hazard Class 6.1(b)

 Synthetic Route

 Articles3

More Articles
Cross-linked bioreducible layer-by-layer films for increased cell adhesion and transgene expression.

J. Phys. Chem. B 114(16) , 5283-91, (2010)

The effect of cross-linking layer-by-layer (LbL) films consisting of bioreducible poly(2-dimethylaminoethyl methacrylate) (rPDMAEMA) and DNA is examined with regard to rigidity, biodegradability, cell...

Reactions of a-lithio (aminocarbene) tungsten anions with diiodoalkanes: Synthesis of (µ-bis (aminocarbene)) ditungsten complexes. Macomber DW and Madhukar P.

J. Organomet. Chem. 433(3) , 279-85, (1992)

Electrochemical Reduction of 1, 5-Dihalopentanes at Carbon Cathodes in Dimethylformamide. Pritts WA and Peters DG.

J. Electrochem. Soc. 141(12) , 3318-3324, (1994)

 Synonyms

1,5-Diiodopentane
diiodopentane
1,5-iodobutane
Pentane, 1,5-diiodo-
1,5-diiodpentane
1,4-diiodopentane
Pentane,5-diiodo
EINECS 211-054-1
PENTANE,1,5-DIIODO
Pentamethylene diiodide
MFCD00001101