Top Suppliers:I want be here

139-41-3

139-41-3 structure
139-41-3 structure

Name sodium,2-[bis(2-hydroxyethyl)amino]acetate
Synonyms EINECS 205-360-4
MFCD00065943
Sodium dihydroxyethylglycinate
Bicine sodium salt
Density 1.2 g/mL at 25 °C
Boiling Point 388.5ºC at 760mmHg
Molecular Formula C6H12NNaO4
Molecular Weight 185.15400
Flash Point 188.8ºC
Exact Mass 185.06600
PSA 83.83000
Index of Refraction n20/D 1.413

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name: Bicine sodium salt
REACH No.: A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No.: 139-41-3
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin corrosion (Category 1A), H314
Specific target organ toxicity - single exposure (Category 3), H335
Specific target organ toxicity - repeated exposure (Category 2), H373
Acute aquatic toxicity (Category 1), H400
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
C CorrosiveR35
Xn HarmfulR48/22
N Dangerous for theR50
environment
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal wordDanger
Hazard statement(s)
H314Causes severe skin burns and eye damage.
H335May cause respiratory irritation.
H373May cause damage to organs through prolonged or repeated exposure.
H400Very toxic to aquatic life.
Precautionary statement(s)
P261Avoid breathing vapours.
P273Avoid release to the environment.
P280Wear protective gloves/ protective clothing/ eye protection/ face
protection.
P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P310Immediately call a POISON CENTER or doctor/ physician.
Supplemental Hazardnone
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)C Corrosive
N Dangerous for the environment
R-phrase(s)
R35Causes severe burns.
R48/22Harmful: danger of serious damage to health by prolonged exposure if
swallowed.
R50Very toxic to aquatic organisms.
S-phrase(s)
S26In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S36/37/39Wear suitable protective clothing, gloves and eye/face protection.
S45In case of accident or if you feel unwell, seek medical advice immediately
(show the label where possible).
S61Avoid release to the environment. Refer to special instructions/ Safety
data sheets.
Other hazards - none

SECTION 3: Composition/information on ingredients
Mixtures
Synonyms: N,N-Bis(2-hydroxyethyl)glycinesodium salt
Formula: C6H12NNaO4
Molecular Weight: 185,15 g/mol
Hazardous ingredients according to Regulation (EC) No 1272/2008
ComponentClassificationConcentration
Sodium hydroxide
CAS-No.1310-73-2Skin Corr. 1A; H31410 - 20 %
EC-No.215-185-5
Index-No.011-002-00-6
Diethanolamine
CAS-No.111-42-2Acute Tox. 4; STOT RE 2;10 - 20 %
EC-No.203-868-0Skin Irrit. 2; Eye Dam. 1;
Index-No.603-071-00-1H302, H315, H318, H373
Ammonium hydroxide
CAS-No.1336-21-6Skin Corr. 1B; Aquatic Acute 10 - 20 %
EC-No.215-647-61; H314, H400
Index-No.007-001-01-2
Sodium carbonate
CAS-No.497-19-8Eye Irrit. 2; H31910 - 20 %
EC-No.207-838-8
Index-No.011-005-00-2
Hazardous ingredients according to Directive 1999/45/EC
ComponentClassificationConcentration
Sodium hydroxide
CAS-No.1310-73-2C, R3510 - 20 %
EC-No.215-185-5
Index-No.011-002-00-6
Diethanolamine
CAS-No.111-42-2Xn, R22 - R38 - R41 - R48/22 10 - 20 %
EC-No.203-868-0
Index-No.603-071-00-1
Ammonium hydroxide
CAS-No.1336-21-6C, N, R34 - R5010 - 20 %
EC-No.215-647-6
Index-No.007-001-01-2
Sodium carbonate
CAS-No.497-19-8Xi, R3610 - 20 %
EC-No.207-838-8
Index-No.011-005-00-2
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a
physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx), Sodium oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
Evacuate personnel to safe areas.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Avoid inhalation of vapour or mist.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection
tested and approved under appropriate government standards such as NIOSH (US) or EN
166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into
the environment must be avoided.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) AppearanceForm: liquid
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingno data available
point
f) Initial boiling point and no data available
boiling range
g) Flash pointnot applicable
h) Evapouration rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative density1,2 g/mL at 25 °C
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Zinc, Oxidizing agents, Strong oxidizing agents, Iron, Copper, Strong acids, Organic materials, Aluminum
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:2B - Group 2B: Possibly carcinogenic to humans (Diethanolamine)
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and
skin., spasm, inflammation and edema of the larynx, spasm, inflammation and edema of the bronchi,
pneumonitis, pulmonary edema, burning sensation, Cough, wheezing, laryngitis, Shortness of breath,
Headache, Nausea
Liver - Irregularities - Based on Human Evidence (Diethanolamine)

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
Very toxic to aquatic life.

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: 3267IMDG: 3267IATA: 3267
UN proper shipping name
ADR/RID: CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S. (Ammonium hydroxide, Diethanolamine,
Sodium hydroxide)
IMDG: CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S. (Sodium hydroxide, Ammonium hydroxide,
Diethanolamine)
IATA:Corrosive liquid, basic, organic, n.o.s. (Sodium hydroxide, Ammonium hydroxide,
Diethanolamine)
Transport hazard class(es)
ADR/RID: 8IMDG: 8IATA: 8
Packaging group
ADR/RID: IIIIMDG: IIIIATA: III
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available



SECTION 15 - REGULATORY INFORMATION
N/A


SECTION 16 - ADDITIONAL INFORMATION
N/A

CHEMICAL IDENTIFICATION

RTECS NUMBER :
MB9105000
CHEMICAL NAME :
Glycine, N,N-bis(2-hydroxyethyl)-, monosodium salt
CAS REGISTRY NUMBER :
139-41-3
LAST UPDATED :
199701
DATA ITEMS CITED :
3
MOLECULAR FORMULA :
C6-H12-N-O4.Na
Hazard Codes C: Corrosive;
Risk Phrases R35
Safety Phrases 26-36/37/39-45
RIDADR UN 3267 8/PG 3
WGK Germany -