Analyst (Cambridge UK) 2012-08-07

Development of a new and environment friendly hollow fiber-supported liquid phase microextraction using vesicular aggregate-based supramolecular solvent.

Morteza Moradi, Yadollah Yamini, Fatemeh Rezaei, Elham Tahmasebi, Ali Esrafili

Index: Analyst 137(15) , 3549-57, (2012)

Full Text: HTML

Abstract

Hollow fiber-based liquid phase microextraction (HF-LPME) using conventional solvents is limited by their relative instability and high volatility. The use of supramolecular solvents as a liquid membrane phase could overcome these inconveniences due to their negligible vapour pressure and high viscosity. In the present study, a novel and highly flexible method was developed based on supramolecular solvents constructed of vesicles of decanoic acid, which were used for the first time as a solvent in HF-LPME. This solvent is produced from the coacervation of decanoic acid aqueous vesicles by the action of tetrabutylammonium (Bu(4)N(+)). In this work, halogenated anilines as model compounds were extracted from water samples into a supramolecular solvent impregnated in the pores and also filled inside the porous polypropylene hollow fiber membrane. The extracted anilines were separated and determined by high-performance liquid chromatography. The technique requires minimal sample preparation time and toxic organic solvent consumption, and provides a significant advantage over conventional analytical methods. The important parameters influencing the extraction efficiency were studied and optimized utilizing two different optimization methods: one variable at a time and the Box-Behnken design. Under the optimum conditions, the preconcentration factors were in the range of 74 to 203. Linearity of the method was obtained in the range of 1.0-100 μg L(-1) with the correlation coefficients of determination (R(2)) ranging from 0.9901 to 0.9986. The limits of detection for the target anilines were 0.5-1.0 μg L(-1). The relative standard deviations varied from 3.9% to 6.0%. The relative recoveries of the three halogenated anilines from water samples at a spiking level of 20.0 μg L(-1) were in the range of 90.4-107.4%.

Related Compounds

Structure Name/CAS No. Articles
N,N,N-Tributyl-1-butanaminium azide Structure N,N,N-Tributyl-1-butanaminium azide
CAS:993-22-6
Tetrabutylammonium bromide Structure Tetrabutylammonium bromide
CAS:1643-19-2
Tetrabutylammonium hydroxide Structure Tetrabutylammonium hydroxide
CAS:2052-49-5
Tetrabutylammonium fluoride Structure Tetrabutylammonium fluoride
CAS:429-41-4
Decanoic acid Structure Decanoic acid
CAS:334-48-5
Tetrabutylammonium phosphate monobasic Structure Tetrabutylammonium phosphate monobasic
CAS:5574-97-0
Tetrabutylammonium iodide Structure Tetrabutylammonium iodide
CAS:311-28-4
Tetrabutylammonium hydrogensulfate Structure Tetrabutylammonium hydrogensulfate
CAS:32503-27-8
Tetrabutylammonium chloride Structure Tetrabutylammonium chloride
CAS:1112-67-0
Tetrabutylammonium perchlorate Structure Tetrabutylammonium perchlorate
CAS:1923-70-2