709-60-4

709-60-4结构式
709-60-4结构式

化源商城直购

中文名 3-乙酰苯磺酰氯氟化物
英文名 3-acetylbenzenesulfonyl fluoride
中文别名 3-乙酰苯磺酰氟
英文别名 Benzenesulfonyl fluoride,3-acetyl
Acetylbenzenesulfonyl fluoride
3-Fluorsulfonyl-acetophenon
EINECS 211-912-5
BENZENESULFONYL FLUORIDE,m-ACETYL
3-Acetylbenzenesulphonyl fluoride
密度 1.333g/cm3
沸点 304.6ºC at 760 mmHg
熔点 90-92ºC
分子式 C8H7FO3S
分子量 202.20300
闪点 138ºC
精确质量 202.01000
PSA 59.59000
LogP 2.62820
折射率 1.505
Name: 3-Acetylbenzenesulfonyl fluoride 99% Material Safety Data Sheet
Synonym: 3-acetylbenzenesulfonyl fluoride; m-(Fluorosulfonyl)acetophenon
CAS: 709-60-4
Section 1 - Chemical Product MSDS Name:3-Acetylbenzenesulfonyl fluoride 99% Material Safety Data Sheet
Synonym:3-acetylbenzenesulfonyl fluoride; m-(Fluorosulfonyl)acetophenon

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
709-60-4 3-Acetylbenzenesulfonyl fluoride 99 211-912-5
Hazard Symbols: XI C
Risk Phrases: 34 36/37/38

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Causes burns. Irritating to eyes, respiratory system and skin.Moisture sensitive.Corrosive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
The toxicological properties of this substance have not been fully investigated. Causes digestive tract irritation with possible burns.
Inhalation:
The toxicological properties of this substance have not been fully investigated. Causes respiratory tract irritation with possible burns.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Discard contaminated clothing in a manner which limits further exposure. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:
Antidote: None reported.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Do NOT use water directly on fire. Use foam, dry chemical, or carbon dioxide.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Discard contaminated shoes.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 709-60-4: United States OSHA: 2.5 mg/m3 TWA (as F) (listed under Fluorides Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: tan
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 90.00 - 92.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: CH3COC6H4SO2F
Molecular Weight: 202.20

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, moisture.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, fluoride fumes.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 709-60-4: DB8941000 LD50/LC50:
Not available.
Carcinogenicity:
3-Acetylbenzenesulfonyl fluoride - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: II

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI C
Risk Phrases:
R 34 Causes burns.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 709-60-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 709-60-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 709-60-4 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

CHEMICAL IDENTIFICATION

RTECS NUMBER :
DB8941000
CHEMICAL NAME :
Benzenesulfonyl fluoride, m-acetyl-
CAS REGISTRY NUMBER :
709-60-4
LAST UPDATED :
199612
DATA ITEMS CITED :
1
MOLECULAR FORMULA :
C8-H7-F-O3-S

HEALTH HAZARD DATA

ACUTE TOXICITY DATA

TYPE OF TEST :
LDLo - Lowest published lethal dose
ROUTE OF EXPOSURE :
Oral
SPECIES OBSERVED :
Rodent - mouse
DOSE/DURATION :
1070 mg/kg
TOXIC EFFECTS :
Details of toxic effects not reported other than lethal dose value
REFERENCE :
AECTCV Archives of Environmental Contamination and Toxicology. (Springer-Verlag New York, Inc., Service Center, 44 Hartz Way, Secaucus, NJ 070944) V.1- 1973- Volume(issue)/page/year: 14,111,1985

危害码 (欧洲) Xi:Irritant;
风险声明 (欧洲) R36/37/38
安全声明 (欧洲) S24/25
海关编码 2914700090
海关编码 2914700090
中文概述 2914700090 其他酮及醌的卤化、磺化衍生物(包括硝化和亚硝化衍生物). 增值税率:17.0% 退税率:9.0% 监管条件:无 最惠国关税:5.5% 普通关税:30.0%
申报要素 品名, 成分含量, 用途, 丙酮报明包装
Summary HS: 2914700090 halogenated, sulphonated, nitrated or nitrosated derivatives of ketones and quinones, whether or not with other oxygen function Tax rebate rate:9.0% Supervision conditions:none VAT:17.0% MFN tariff:5.5% General tariff:30.0%