品牌现货直购
供应商:我要出现这里


查看所有供应商和价格请点击:

13064-50-1生产厂家

13064-50-1价格

13064-50-1

13064-50-1结构式
13064-50-1结构式

化源商城直购

中文名 联硫亚盐氯乙醛钠水合物
英文名 chloroacetaldehyde sodium bisulfite
中文别名 氯乙醛亚硫酸氢钠
氯乙醛亚硫酸氢钠
氯乙醛重亚硫酸钠
联硫亚盐氯乙醛钠
英文别名 Chloroacetaldehyde sodium bisulfite hydrate
Sodium 2-Chloro-1-hydroxyethanesulfonate
Chloroacetaldehyde Sodium Bisulfite
2-Chloroethanol-1-sulfonic Acid Sodium Salt2-Chloro-1-hydroxyethanesulfonic Acid Sodium SaltSodium 2-Chloro-1-hydroxyethanesulfonate
EINECS 235-958-0
2-CHLORO-1-HYDROXYETHANESULFONIC ACID SODIUM SALT
2-Chloro-1-hydroxyethanesulphonic acid sodium salt
sodium 2-chloro-1-hydroxyethanesulphonate
CHLOROACETALDEHYDE SODIUM BISULPHITE
1-Hydroxy-2-chloroethanesulfonic acid sodium salt
2-Chloroethanol-1-sulfonic Acid Sodium Salt
MFCD00059901
分子式 C2H4ClNaO4S
分子量 182.55900
精确质量 181.94200
PSA 85.81000
LogP 0.16960
储存条件

常温密闭,阴凉通风干燥

稳定性

常温常压下稳定

避免的物料 氧化物
分子结构

1、摩尔折射率:无可用的

2、摩尔体积(cm3/mol):无可用的

3、等张比容(90.2K):无可用的

4、表面张力(dyne/cm):无可用的

5、介电常数:无可用的

6、极化率(10-24cm3):无可用的

7、单一同位素质量:181.941651 Da

8、标称质量:182 Da

9、平均质量:182.5585 Da

计算化学

1、 氢键供体数量:1

2、 氢键受体数量:4

3、 可旋转化学键数量:2

4、 拓扑分子极性表面积(TPSA):77.4

5、 重原子数量:9

6、 表面电荷:0

7、 复杂度:148

8、 同位素原子数量:0

9、 确定原子立构中心数量: 0

10、 不确定原子立构中心数量:1

11、 确定化学键立构中心数量:0

12、 不确定化学键立构中心数量:0

13、 共价键单元数量:2

更多

1. 性状:白色粉末

2. 密度(g/mL, 25 ℃ ):未确定

3. 相对蒸汽密度(g/mL,空气=1):未确定

4. 熔点(ºC):未确定

5. 沸点(ºC,常压):未确定

6. 沸点(ºC,0.1mmHg):未确定

7. 折射率:未确定

8. 闪点(ºC):未确定

9. 比旋光度(º):未确定

10. 自燃点或引燃温度(ºC):未确定

11. 蒸气压(20ºC):未确定

12. 饱和蒸气压(kPa,60ºC):未确定

13. 燃烧热(KJ/mol):未确定

14. 临界温度(ºC):未确定

15. 临界压力(KPa):未确定

16. 油水(辛醇/水)分配系数的对数值:未确定

17. 爆炸上限(%,V/V):未确定

18. 爆炸下限(%,V/V):未确定

19. 溶解性:未确定

Chloroacetaldehyde Sodium Bisulfite Revision number: 1
SAFETY DATA SHEET

Section1. BASE INFORMATION
Product name:Chloroacetaldehyde Sodium Bisulfite

Revision number:1

Section2. HAZARDS IDENTIFICATION
Classification of the GHS
PHYSICAL HAZARDSNot classified
HEALTH HAZARDS
Category 3
Acute toxicity (Oral)
ENVIRONMENTAL HAZARDSNot classified
GHS label elements
Pictograms or hazard symbols
Signal wordDanger
Hazard statementToxic if swallowed
Precautionary statements
[Prevention]Do not eat, drink or smoke when using this product.
Wash hands thoroughly after handling.
[Response]IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Rinse
mouth.
[Storage]Store locked up.
Dispose of contents/container through a waste management company authorized by
[Disposal]
the local government

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:Substance
Component(s):Chloroacetaldehyde Sodium Bisulfite
Percent:>95.0%(T)
CAS Number:13064-50-1
Synonyms:2-Chloroethanol-1-sulfonic Acid Sodium Salt , 2-Chloro-1-hydroxyethanesulfonic Acid
Sodium Salt
Chemical Formula:C2H4ClNaO4S

Section4. FIRST AID MEASURES
Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Get medical advice/attention if you feel unwell.
Skin contact:Remove/Take off immediately all contaminated clothing. Rinse skin with
water/shower. If skin irritation or rash occurs: Get medical advice/attention.
Chloroacetaldehyde Sodium Bisulfite

Section4. FIRST AID MEASURES
Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Ingestion:Immediately call a POISON CENTER or doctor/physician. Rinse mouth.
Protection of first-aiders:A rescuer should wear personal protective equipment, such as rubber gloves and air-
tight goggles.

Section5. FIRE-FIGHTING MEASURES
Dry chemical, foam, water spray, carbon dioxide.
Suitable extinguishing
media:
Specific hazards:Take care as it may decompose upon combustion or in high temperatures to
generate poisonous fume.
Specific methods:Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions,Use extra personal protective equipment (P3 filter respirator for toxic particles). Keep
protective equipment and people away from and upwind of spill/leak. Entry to non-involved personnel should
emergency procedures: be controlled around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it.
containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with
up: appropriate laws and regulations.

Section7. HANDLING AND STORAGE
Handling
Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent dispersion of dust. Wash hands and face thoroughly after handling.
Use a closed system if possible. Use a local exhaust if dust or aerosol will be
generated.
Advice on safe handling:Avoid contact with skin, eyes and clothing.
Storage
Storage conditions:Keep container tightly closed. Store in a cool and dark place.
Store locked up.
Store away from incompatible materials such as oxidizing agents.
Packaging material:Law is followed.

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls:Install a closed system or local exhaust. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Dust respirator, self-contained breathing apparatus(SCBA), supplied air respirator,
etc. Use respirators approved under appropriate government standards and follow
local and national regulations.
Hand protection:Impervious gloves.
Eye protection:Safety goggles. A face-shield, if the situation requires.
Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Solid
Physical state (20°C):
Form:crystal - powder
Color:White - Very pale yellow
Odor:No data available
Chloroacetaldehyde Sodium Bisulfite

Section9. PHYSICAL AND CHEMICAL PROPERTIES
pH: No data available
Melting point/freezing point:No data available
Boiling Point/Range:No data available
Flash Point:No data available
Explosive limits
No data available
Lower:
Upper:No data available
No data available
Density:
Solubility:No data available

Section10. STABILITY AND REACTIVITY
Stability:Stable under proper conditions.
Reactivity:No special reactivity has been reported.
Incompartible materials: oxidizing agents
Hazardous Decomposition Carbon monoxide, Carbon dioxide, Sulphur oxides, Hydrogen chloride
Products:

Section11. TOXICOLOGICAL INFORMATION
No data available
Acute Toxicity:
Skin corrosion/irritation: No data available
No data available
Serious eye
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
Group 3 (Not classifiable as carcinogenic to humans).
IARC =
NTP =No data available
No data available
Reproductive toxicity:

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
Fish:No data available
Crustacea:No data available
Algae:No data available
Persistence / degradability: No data available
BioaccumulativeNo data available
potential(BCF):
Mobillity in soil
log Pow:No data available
Soil adsorption (Koc):No data available
Henry's LawNo data available
constant(PaM3/mol):

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.
Observe all federal, state and local regulations when disposing of the substance.

Section14. TRANSPORT INFORMATION
Hazards Class:6.1: Toxic substance.
UN-No:2811
Proper shipping name:Toxic solid, organic, n.o.s.
Packing group:III
Chloroacetaldehyde Sodium Bisulfite

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26,
2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

毒理学数据:

主要的刺激性影响:

在皮肤上面:刺激皮肤和粘膜

在眼睛上面:刺激的影响

致敏作用:没有已知的敏化现象

生态学数据:

通常对水体是稍微有害的,不要将未稀释或大量产品接触地下水,水道或污水系统,未经政府许可勿将材料排入周围环境。

风险声明 (欧洲) R25
安全声明 (欧洲) S22-S36/37-S45
危险品运输编码 UN 2811
包装等级 III
危险类别 6.1