品牌现货直购
供应商:我要出现这里

查看所有供应商和价格请点击:

7783-62-2生产厂家

7783-62-2价格

7783-62-2

7783-62-2结构式
7783-62-2结构式

化源商城直购

中文名 四氟化锡(IV)
英文名 tin(iv) fluoride
中文别名 四氟化锡
英文别名 MFCD00042541
dibromo-lambda2-stannane
SnBr2
tin fluoride
stannous fluoride
Tin bromide (SnBr2)
stannous tetrafluoride
EINECS 232-016-0
Tin dibromide
stannic fluoride
Stannous bromide
tin tetrafluoride
Tin(II) bromide
密度 4,78 g/cm3
沸点 19.5ºC at 760mmHg
熔点 705ºC (subl.)
分子式 F4Sn
分子量 194.69500
精确质量 195.89600
LogP 1.30000
外观性状 灰白色粉末
储存条件

保持贮藏器密封

放入紧密的贮藏器内,储存在阴凉,干燥的地方

稳定性

如果遵照规格使用和储存则不会分解

避免接触水分/潮湿。705℃时升华,溶于水并水解。

计算化学

1.疏水参数计算参考值(XlogP):无

2.氢键供体数量:0

3.氢键受体数量:4

4.可旋转化学键数量:0

5.互变异构体数量:无

6.拓扑分子极性表面积0

7.重原子数量:5

8.表面电荷:0

9.复杂度:0

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:5

更多

1. 性状:白色四方晶系晶体。

2. 密度(g/mL 25ºC):4.78

3. 相对蒸汽密度(g/mL,空气=1):未确定

4. 熔点(ºC):705

5. 沸点(ºC,常压):未确定

6. 沸点(ºC,5.2kPa):未确定

7. 折射率(n20/D):未确定

8. 闪点(ºC,):未确定

9. 比旋光度(º):未确定

10. 自燃点或引燃温度(ºC):未确定

11. 蒸气压(kPa,25ºC):未确定

12. 饱和蒸气压(kPa,60ºC):未确定

13. 燃烧热(KJ/mol):未确定

14. 临界温度(ºC):未确定

15. 临界压力(KPa):未确定

16. 油水(辛醇/水)分配系数的对数值(25℃):未确定

17. 爆炸上限(%,V/V):未确定

18. 爆炸下限(%,V/V):未确定

19. 溶解性(mg/mL):溶于冷水


Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name: Tin(IV) fluoride
CAS-No.: 7783-62-2


Section2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Acute toxicity, Oral (Category 4)
Acute toxicity, Inhalation (Category 4)
Acute toxicity, Dermal (Category 4)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Harmful by inhalation, in contact with skin and if swallowed.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal wordWarning
Hazard statement(s)
H302 + H312 + H332Harmful if swallowed, in contact with skin or if inhaled
Precautionary statement(s)
Wear protective gloves/ protective clothing.
Supplemental Hazardnone
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R20/21/22Harmful by inhalation, in contact with skin and if swallowed.
S-phrase(s)
S26In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S27Take off immediately all contaminated clothing.
S36Wear suitable protective clothing.
S36/39Wear suitable protective clothing and eye/face protection.
Other hazards - none

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula: F4Sn
Molecular Weight: 194,70 g/mol
ComponentConcentration
Tin(IV) fluoride
CAS-No.7783-62-2-
EC-No.232-016-0

Section4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
Salivation, Nausea, Abdominal pain, Vomiting, Fever, Rapid respiration, Fluoride ion can reduce serum
calcium levels possibly causing fatal hypocalcemia., burning sensation, Cough, wheezing, laryngitis,
Shortness of breath, Headache
Indication of any immediate medical attention and special treatment needed
no data available

Section5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Hydrogen fluoride, Tin/tin oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
adequate ventilation. Avoid breathing dust.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Moisture sensitive.
Specific end use(s)
no data available

Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) AppearanceForm: solid
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingno data available
point
f) Initial boiling point and no data available
boiling range
g) Flash pointnot applicable
h) Evaporation rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative densityno data available
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

Section10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
Avoid moisture.
Incompatible materials
no data available
Hazardous decomposition products
Other decomposition products - no data available

Section11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
InhalationHarmful if inhaled. May cause respiratory tract irritation.
IngestionHarmful if swallowed.
SkinHarmful if absorbed through skin. May cause skin irritation.
EyesMay cause eye irritation.
Signs and Symptoms of Exposure
Salivation, Nausea, Abdominal pain, Vomiting, Fever, Rapid respiration, Fluoride ion can reduce serum
calcium levels possibly causing fatal hypocalcemia., burning sensation, Cough, wheezing, laryngitis,
Shortness of breath, Headache
Additional Information
RTECS: Not available

Section12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

Section13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material. Dissolve or mix the material with a
combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

Section14. TRANSPORT INFORMATION
UN number
ADR/RID: -IMDG: -IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA:Not dangerous goods
Transport hazard class(es)
ADR/RID: -IMDG: -IATA: -
Packaging group
ADR/RID: -IMDG: -IATA: -
Environmental hazards
ADR/RID: noIMDG Marine Pollutant: noIATA: no
Special precautions for user
no data available

Section15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment


SECTION 16 - ADDITIONAL INFORMATION
N/A

生态学数据:

对水是稍微危害的,若无政府许可,勿将材料排入周围环境

符号 GHS07
GHS07
信号词 Warning
危害声明 H302 + H312 + H332
警示性声明 P261-P280-P301 + P312 + P330
个人防护装备 dust mask type N95 (US);Eyeshields;Gloves
危害码 (欧洲) Xn,C
风险声明 (欧洲) 20/21/22
安全声明 (欧洲) 26-27-36-36/39
危险品运输编码 UN2923
WGK德国 3
包装等级 II

1.在加热新制备的不含氧化锡的氧化亚锡时,同时通入氟气,使其在500℃时反应,约5h生成氟化锡。若加热温度为150℃,反应不发生,若为200℃则生成氟化锡及氧化锡。

如用氧化锡为原料,300℃温度以下不反应,在400℃时有80%可转化为氟化锡,在500~550℃完全转化为氟化锡。

硫化锡与氟反应迅速,甚至在室温下也可反应生成氟化锡。

2.用一不锈钢或蒙乃尔合金制的圆筒,带有相应材质的真空阀门。在圆筒内放入已知量(约2mmol)的干燥锡粉末,再按化学计量略微过量的三氟氧化氮(NF3O)在-196℃用标准真空系统装置压入圆筒内。在180~200℃下加热混合物24h,氟化锡产率可高于99%。

碳酰氟(COF2)和亚硫酰氟(SOF2)与单质锡不反应,但它们与金属氧化物如氧化锡反应生成相应的氟化物。

注意三氟氧化氮是强氧化剂,当它与有机物或无机物混合时可能会发生爆炸,不要扩大合成规模。当三氟氧化氮与任何物质反应时,都应采取适当的安全防护措施。