Haider A J Al Lawati, Mira M Al-Nadabi, Gouri B Varma, Fakhr Eldin O Suliman, Hasnaa Al-Abri
文献索引：Luminescence 29(8) , 1148-53, (2014)
A highly sensitive, rapid and economical method for the determination of amlodipine (AM) in biological fluids was developed using a peroxyoxalate chemiluminescence (CL) system in a lab-on-a-chip device. Peroxyoxalate-CL is an indirect type of CL that allows the detection of native fluorophores or compounds derivatized with fluorescent labels. Here, fluorescamine was reacted with AM, and the derivatization product was used in a bis-(2,4,6-trichlorophenyl)oxalate-CL system. Fluorescamine reacts selectively with aliphatic primary amine at neutral or basic pH. As most of the calcium channel blocker and many cardiovascular drugs do not contain primary amine, the developed method is highly selective. The parameters that influenced the CL signal intensity were studied carefully. These included the chip geometry, pH, concentration of reagents used and flow rates. Moreover, we confirmed our previous observation about the effects of imidazole, which is commonly used in the bis-(2,4,6-trichlorophenyl)oxalate-CL system as a catalyst, and found that the signal was significantly improved when imidazole was absent. Under optimized conditions, a calibration curve was obtained with a linear range (10-100 µg/L). The limit of detection was 3 µg/L, while the limit of quantification was 10 µg/L. Finally the method was applied for the determination of AM in biological fluids successfully.Copyright © 2014 John Wiley & Sons, Ltd.
Copyright © 2019 ChemSrc All Rights Reserved