Carboxypeptidase P

---

SPECIAL INDICATION OF HAZARDS TO HUMANS AND THE ENVIRONMENT
Irritating to eyes, respiratory system and skin. May cause
sensitization by inhalation.

---

3 - Composition/Information on Ingredients

---

Product NameCAS #EC noAnnex I
Index Number
CARBOXYPEPTIDASE P FROM9075-64-3 None647-014-00-9
PENICILLIUM JAN-THINELLUM

---

4 - First Aid Measures

---

AFTER INHALATION
If inhaled, remove to fresh air. If breathing becomes difficult,
call a physician.
AFTER SKIN CONTACT
In case of skin contact, flush with copious amounts of water for
at least 15 minutes. Remove contaminated clothing and shoes.
Call a physician.
AFTER EYE CONTACT
In case of contact with eyes, flush with copious amounts of
water for at least 15 minutes. Assure adequate flushing by
separating the eyelids with fingers. Call a physician.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.

---

5 - Fire Fighting Measures

---

SIGMAwww.molbase.com
EXTINGUISHING MEDIA
Suitable: Water spray. Carbon dioxide, dry chemical powder, or
appropriate foam.
SPECIAL RISKS
Specific Hazard(s): Emits toxic fumes under fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

---

6 - Accidental Release Measures

---

PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear respirator, chemical safety goggles, rubber boots, and
heavy rubber gloves.
METHODS FOR CLEANING UP
Sweep up, place in a bag and hold for waste disposal. Avoid
raising dust. Ventilate area and wash spill site after material
pickup is complete.

---

7 - Handling and Storage

---

HANDLING
Directions for Safe Handling: Avoid breathing dust. Avoid
contact with eyes, skin, and clothing. Avoid prolonged or
repeated exposure.
STORAGE
Conditions of Storage: Keep tightly closed.
Store at -20°C

---

8 - Exposure Controls / Personal Protection

---

ENGINEERING CONTROLS
Mechanical exhaust required.
GENERAL HYGIENE MEASURES
Wash thoroughly after handling. Wash contaminated clothing before
reuse.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Where risk assessment shows air-purifying respirators
are appropriate use a dust mask type N95 (US) or type P1 (EN 143)
respirator.
Special Protective Measures: Wear appropriate government approved
respirator, chemical-resistant gloves, safety goggles, other
protective clothing.

---

9 - Physical and Chemical Properties

---

AppearancePhysical State: Solid
Color: White
Form: Lyophilisate
PropertyValueAt Temperature or Pressure
SIGMAwww.molbase.com
pH N/A
BP/BP RangeN/A
MP/MP RangeN/A
Flash PointN/A
FlammabilityN/A
Autoignition TempN/A
Oxidizing Properties N/A
Explosive Properties N/A
Explosion LimitsN/A
Vapor PressureN/A
Partition Coefficient N/A
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

---

10 - Stability and Reactivity

---

STABILITY
Stable: Stable.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Nature of decomposition products
not known.
HAZARDOUS POLYMERIZATION
Hazardous Polymerization: Will not occur

---

11 - Toxicological Information

---

SENSITIZATION
Respiratory: May cause allergic respiratory reaction.
SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
ROUTE OF EXPOSURE
Skin Contact: Causes skin irritation.
Skin Absorption: May be harmful if absorbed through the skin.
Eye Contact: Causes eye irritation.
Inhalation: Material is irritating to mucous membranes and upper
respiratory tract. May be harmful if inhaled.
Ingestion: May be harmful if swallowed.
CONDITIONS AGGRAVATED BY EXPOSURE
The toxicological properties have not been thoroughly
investigated.

---

12 - Ecological Information

---

No data available.
SIGMAwww.molbase.com

---

13 - Disposal Considerations

---

SUBSTANCE DISPOSAL
Contact a licensed professional waste disposal service to dispose
of this material. Dissolve or mix the material with a combustible
solvent and burn in a chemical incinerator equipped with an
afterburner and scrubber. Observe all federal, state, and local
environmental regulations.

---

14 - Transport Information

---

RID/ADR
Non-hazardous for road transport.
IMDG
Non-hazardous for sea transport.
IATA
Non-hazardous for air transport.

---

15 - Regulatory Information

---

CLASSIFICATION AND LABELING ACCORDING TO EU DIRECTIVES
ANNEX I INDEX NUMBER: 647-014-00-9
INDICATION OF DANGER: Xn
Harmful.
R-PHRASES: 36/37/38-42
Irritating to eyes, respiratory system and skin. May cause
sensitization by inhalation.
S-PHRASES: 22-24-26-36/37
Do not breathe dust. Avoid contact with skin. In case of
contact with eyes, rinse immediately with plenty of water and
seek medical advice. Wear suitable protective clothing and
gloves.
Caution: Substance not yet fully tested (EU).
COUNTRY SPECIFIC INFORMATION
Germany
WGK: 1
Self-Classification

---

16 - Other Information

---

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
SIGMAwww.molbase.com
For R&D use only. Not for drug, household or other uses.
SIGMAwww.molbase.com

---

SECTION 16 - ADDITIONAL INFORMATION
N/A