(4-isocyanatophenyl)-phenyl-methanone

Modify Date: 2024-01-02 18:57:54

(4-isocyanatophenyl)-phenyl-methanone Structure
(4-isocyanatophenyl)-phenyl-methanone structure
Common Name (4-isocyanatophenyl)-phenyl-methanone
CAS Number 63648-38-4 Molecular Weight 223.22700
Density 1.11g/cm3 Boiling Point 357ºC at 760 mmHg
Molecular Formula C14H9NO2 Melting Point 69-73ºC(lit.)
MSDS Chinese Flash Point 147.1ºC
Symbol GHS07 GHS08
GHS07, GHS08
Signal Word Danger

 Names

Name (4-isocyanatophenyl)-phenylmethanone
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.11g/cm3
Boiling Point 357ºC at 760 mmHg
Melting Point 69-73ºC(lit.)
Molecular Formula C14H9NO2
Molecular Weight 223.22700
Flash Point 147.1ºC
Exact Mass 223.06300
PSA 46.50000
LogP 2.88490
Index of Refraction 1.58

 MSDS


Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product name: 4-Isocyanatobenzophenone

Section2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
According to Regulation (EC) No1272/2008
Acute toxicity, Inhalation (Category 4)
Acute toxicity, Dermal (Category 4)
Acute toxicity, Oral (Category 4)
Skin irritation (Category 2)
Eye irritation (Category 2)
Respiratory sensitization (Category 1)
Specific target organ toxicity - single exposure (Category 3)
According to European Directive 67/548/EEC as amended.
Harmful by inhalation, in contact with skin and if swallowed. Irritating to eyes, respiratory system and skin. May
cause sensitization by inhalation.
Label elements
Pictogram
Signal wordDanger
Hazard statement(s)
Harmful if swallowed.
Harmful in contact with skin.
Causes skin irritation.
Causes serious eye irritation.
Harmful if inhaled.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
May cause respiratory irritation.
Precautionary statement(s)
Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
Wear protective gloves/ protective clothing.
P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P342 + P311If experiencing respiratory symptoms: Call a POISON CENTER or doctor/
physician.
Hazard symbol(s)
XnHarmful
R-phrase(s)
R20/21/22Harmful by inhalation, in contact with skin and if swallowed.
R36/37/38Irritating to eyes, respiratory system and skin.
R42May cause sensitization by inhalation.
S-phrase(s)
S23Do not breathe vapour.
S26In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S36Wear suitable protective clothing.
Other hazards
Lachrymator.

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Formula: C14H9NO2
Molecular Weight: 223,23 g/mol
CAS-No.EC-No.Index-No.ClassificationConcentration
4-Isocyanatobenzophenone
---Acute Tox. 4; Skin Irrit. 2; Eye-
Irrit. 2; Resp. Sens. 1; STOT
SE 3; H302, H312, H315,
H319, H332, H334, H335
Xn, R20/21/22 - R36/37/38 -
R42
For the full text of the H-Statements mentioned in this Section, see Section 16.

Section4. FIRST AID MEASURES
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

Section5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special protective equipment for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary.

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
Evacuate personnel to safe areas.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Normal measures for preventive fire protection.
Conditions for safe storage
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully
resealed and kept upright to prevent leakage.
Recommended storage temperature: 2 - 8 °C
Store under inert gas. Moisture sensitive.

Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protective equipment
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with
multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to
engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Hand protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without
touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves
after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Eye protection
Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU).
Skin and body protection
Complete suit protecting against chemicals, The type of protective equipment must be selected according
to the concentration and amount of the dangerous substance at the specific workplace.
Hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at
the end of workday.

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Formliquid
Safety data
pH no data available
Melting point69 - 73 °C - lit.
Boiling pointno data available
Flash pointno data available
Ignition temperatureno data available
Lower explosion limitno data available
Upper explosion limitno data available
Water solubilityno data available

Section10. STABILITY AND REACTIVITY
Chemical stability
Stable under recommended storage conditions.
Conditions to avoid
Avoid moisture.
Materials to avoid
Strong oxidizing agents
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Carbon oxides, nitrogen oxides (NOx)

Section11. TOXICOLOGICAL INFORMATION
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
May cause allergic respiratory reaction.
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
InhalationHarmful if inhaled. Causes respiratory tract irritation.
Ingestion
Harmful if swallowed.
SkinHarmful if absorbed through skin. Causes skin irritation.
Eyes
Causes serious eye irritation.
Signs and Symptoms of Exposure
burning sensation, Cough, wheezing, laryngitis, Shortness of breath, Headache, Nausea, Vomiting
Additional Information
RTECS: Not available

Section12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
PBT and vPvB assessment
no data available
Other adverse effects
no data available

Section13. DISPOSAL CONSIDERATIONS
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional
waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.

Section14. TRANSPORT INFORMATION
ADR/RID
Not dangerous goods
IMDG
Not dangerous goods
IATA
Not dangerous goods

Section15. REGULATORY INFORMATION
The above information is believed to be correct but does not purport to be all inclusive and shall be used
only as a guide. The information in this document is based on the present state of our knowledge and is
applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee
handling or from contact with the above product. See reverse side of invoice or packing slip for additional
terms and conditions of sale.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Symbol GHS07 GHS08
GHS07, GHS08
Signal Word Danger
Hazard Statements H302-H312-H315-H319-H332-H334-H335
Precautionary Statements P261-P280-P305 + P351 + P338-P342 + P311
Personal Protective Equipment Eyeshields;Faceshields;full-face respirator (US);Gloves;multi-purpose combination respirator cartridge (US);type ABEK (EN14387) respirator filter
Hazard Codes Xn
RIDADR NONH for all modes of transport
HS Code 2929109000

 Synthetic Route

~%

(4-isocyanatophenyl)-phenyl-methanone Structure

(4-isocyanatoph...

CAS#:63648-38-4

Literature: Bioorganic and Medicinal Chemistry, , vol. 22, # 8 p. 2416 - 2426

~%

(4-isocyanatophenyl)-phenyl-methanone Structure

(4-isocyanatoph...

CAS#:63648-38-4

Literature: Organic Letters, , vol. 7, # 2 p. 311 - 314

~53%

(4-isocyanatophenyl)-phenyl-methanone Structure

(4-isocyanatoph...

CAS#:63648-38-4

Literature: Synthesis, , # 8 p. 638 - 640

~%

(4-isocyanatophenyl)-phenyl-methanone Structure

(4-isocyanatoph...

CAS#:63648-38-4

Literature: Justus Liebigs Annalen der Chemie, , vol. 311, p. 148

~%

(4-isocyanatophenyl)-phenyl-methanone Structure

(4-isocyanatoph...

CAS#:63648-38-4

Literature: Justus Liebigs Annalen der Chemie, , vol. 311, p. 148

~%

(4-isocyanatophenyl)-phenyl-methanone Structure

(4-isocyanatoph...

CAS#:63648-38-4

Literature: Justus Liebigs Annalen der Chemie, , vol. 311, p. 148

 Customs

HS Code 2929109000
Summary 2929109000. other isocyanates. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%

 Synonyms

4-isocyanato-benzophenone
MFCD03701599
4-Isocyanato-benzophenon
4-benzophenone isocyanate
(4-isocyanato-phenyl)-phenyl-methanone