Tetraoctyliniglycol titanate structure
|
Common Name | Tetraoctyliniglycol titanate | ||
---|---|---|---|---|
CAS Number | 5575-43-9 | Molecular Weight | 336.29000 | |
Density | 1.03 g/mL at 25 °C(lit.) | Boiling Point | 243ºC at 760mmHg | |
Molecular Formula | C16H32O4Ti | Melting Point | N/A | |
MSDS | N/A | Flash Point | 129.4ºC |
Name | 2-ethyl-3-hydroxyhexan-1-olate,titanium(4+) |
---|---|
Synonym | More Synonyms |
Density | 1.03 g/mL at 25 °C(lit.) |
---|---|
Boiling Point | 243ºC at 760mmHg |
Molecular Formula | C16H32O4Ti |
Molecular Weight | 336.29000 |
Flash Point | 129.4ºC |
Exact Mass | 336.17800 |
PSA | 36.92000 |
LogP | 4.28620 |
Index of Refraction | n20/D 1.496(lit.) |
Version 1.2
Regulation (EC) No 1907/2006 1 - Product and Company Information Product NameTITANIUM(IV) 2-ETHYL-1,3-HEXANEDIOLATE, 95% 2 - Hazards Identification SPECIAL INDICATION OF HAZARDS TO HUMANS AND THE ENVIRONMENT Irritating to eyes, respiratory system and skin. 3 - Composition/Information on Ingredients Product NameCAS #EC noAnnex I Index Number TITANIUM(IV)_2-ETHYL-1,3-HEXANEDIO 5575-43-9 226-949-2 None LATE Ingredient NamePercent CAS #EC noAnnex I 2-PROPANOL>= 167-63-0200-661-7 603-117-00-0 <= 5 Symbols: F-Xi R-Phrases: 11-36-67 Highly flammable. Irritating to eyes. Vapors may cause drowsiness and dizziness. FormulaC32H68O8Ti Molecular Weight 628,7000 AMU 4 - First Aid Measures AFTER INHALATION If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen. AFTER SKIN CONTACT In case of contact, immediately wash skin with soap and copious amounts of water. AFTER EYE CONTACT In case of contact, immediately flush eyes with copious amounts ALDRICHwww.molbase.com of water for at least 15 minutes. AFTER INGESTION If swallowed, wash out mouth with water provided person is conscious. Call a physician. 5 - Fire Fighting Measures EXTINGUISHING MEDIA Suitable: Water spray. Carbon dioxide, dry chemical powder, or appropriate foam. SPECIAL RISKS Specific Hazard(s): Emits toxic fumes under fire conditions. SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. 6 - Accidental Release Measures PROCEDURE(S) OF PERSONAL PRECAUTION(S) Wear respirator, chemical safety goggles, rubber boots, and heavy rubber gloves. METHODS FOR CLEANING UP Absorb on sand or vermiculite and place in closed containers for disposal. Ventilate area and wash spill site after material pickup is complete. 7 - Handling and Storage HANDLING Directions for Safe Handling: Do not breathe vapor. Avoid contact with eyes, skin, and clothing. Avoid prolonged or repeated exposure. 8 - Exposure Controls / Personal Protection ENGINEERING CONTROLS Mechanical exhaust required. Safety shower and eye bath. GENERAL HYGIENE MEASURES Wash thoroughly after handling. PERSONAL PROTECTIVE EQUIPMENT Respiratory Protection: Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Hand Protection: Compatible chemical-resistant gloves. Eye Protection: Chemical safety goggles. 9 - Physical and Chemical Properties AppearancePhysical State: Liquid ALDRICHwww.molbase.com PropertyValueAt Temperature or Pressure pH N/A BP/BP RangeN/A MP/MP RangeN/A Flash Point110,000 °CMethod: closed cup FlammabilityN/A Autoignition TempN/A Oxidizing Properties N/A Explosive Properties N/A Explosion LimitsN/A Vapor PressureN/A SG/Density1,0300 g/cm3 Partition Coefficient N/A ViscosityN/A Vapor DensityN/A Saturated Vapor Conc. N/A Evaporation RateN/A Bulk DensityN/A Decomposition Temp.N/A Solvent ContentN/A Water ContentN/A Surface TensionN/A ConductivityN/A Miscellaneous DataN/A SolubilityN/A 10 - Stability and Reactivity STABILITY Stable: Stable. Materials to Avoid: Strong oxidizing agents. HAZARDOUS POLYMERIZATION Hazardous Polymerization: Will not occur 11 - Toxicological Information SIGNS AND SYMPTOMS OF EXPOSURE To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. ROUTE OF EXPOSURE Skin Contact: Causes skin irritation. Skin Absorption: May be harmful if absorbed through the skin. Eye Contact: Causes eye irritation. Inhalation: May be harmful if inhaled. Material is irritating to mucous membranes and upper respiratory tract. Ingestion: May be harmful if swallowed. 12 - Ecological Information No data available. 13 - Disposal Considerations SUBSTANCE DISPOSAL Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an ALDRICHwww.molbase.com afterburner and scrubber. Observe all federal, state, and local environmental regulations. 14 - Transport Information RID/ADR Non-hazardous for road transport. IMDG Non-hazardous for sea transport. IATA Non-hazardous for air transport. 15 - Regulatory Information CLASSIFICATION AND LABELING ACCORDING TO EU DIRECTIVES INDICATION OF DANGER: Xi Irritant. R-PHRASES: 36/37/38 Irritating to eyes, respiratory system and skin. S-PHRASES: 26-36 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable protective clothing. COUNTRY SPECIFIC INFORMATION Germany WGK: 1 Self-Classification 16 - Other Information WARRANTY The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. Inc., shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. Copyright 2010 Co. License granted to make unlimitedpaper copies for internal use only. DISCLAIMER For R&D use only. Not for drug, household or other uses. ALDRICHwww.molbase.com SECTION 16 - ADDITIONAL INFORMATION N/A |
EINECS 226-949-2 |
Tetraoctyliniglycol titanate |
MFCD01319156 |