3-fluoropicolinaldehyde

Modify Date: 2024-01-09 19:07:18

3-fluoropicolinaldehyde Structure
3-fluoropicolinaldehyde structure
Common Name 3-fluoropicolinaldehyde
CAS Number 31224-43-8 Molecular Weight 125.10
Density 1.3±0.1 g/cm3 Boiling Point 166.5±20.0 °C at 760 mmHg
Molecular Formula C6H4FNO Melting Point 49ºC
MSDS Chinese USA Flash Point 54.5±21.8 °C

 Use of 3-fluoropicolinaldehyde


3-Fluoro-2-formylpyridine is a biochemical reagent that can be used as a biological material or organic compound for life science related research.

 Names

Name 3-fluoropyridine-2-carbaldehyde
Synonym More Synonyms

 3-fluoropicolinaldehyde Biological Activity

Description 3-Fluoro-2-formylpyridine is a biochemical reagent that can be used as a biological material or organic compound for life science related research.
Related Catalog
In Vitro 3-Fluoropyridine-2-carboxaldehyde 用于制备具有抗肿瘤活性的 9β-dihydrobaccatin-9,10-acetals 衍生的紫杉醇。它也是一种中间体,用于合成对耐甲氧西林金黄色葡萄球菌 (MRSA) 和铜绿假单胞菌具有有效活性的 S-3578 衍生物。

 Chemical & Physical Properties

Density 1.3±0.1 g/cm3
Boiling Point 166.5±20.0 °C at 760 mmHg
Melting Point 49ºC
Molecular Formula C6H4FNO
Molecular Weight 125.10
Flash Point 54.5±21.8 °C
Exact Mass 125.027695
PSA 29.96000
LogP 0.57
Vapour Pressure 1.8±0.3 mmHg at 25°C
Index of Refraction 1.544

 MSDS

Material Safety Data Sheet

Section1. Identification of the substance
Product Name: 3-Fluoro-2-formylpyridine
Synonyms:

Section2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.
H302:Harmful if swallowed
H315:Causes skin irritation
H319:Causes serious eye irritation
H335:May cause respiratory irritation
P261:Avoid breathing dust/fume/gas/mist/vapours/spray
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present
and easy to do – continue rinsing

Section3. Composition/information on ingredients.
Ingredient name:3-Fluoro-2-formylpyridine
CAS number:31224-43-8

Section4. First aid measures
Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

Section5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

Section6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution:Wear approved mask/respirator
Hand precaution:Wear suitable gloves/gauntlets
Skin protection:Wear suitable protective clothing
Eye protection:Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

Section7. Handling and storage
Handling:This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Storage:Store in closed vessels, refrigerated.

Section8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section9. Physical and chemical properties
Appearance:Not specified
No data
Boiling point:
Melting point:No data
Flash point:No data
Density:No data
Molecular formula: C6H4FNO
Molecular weight: 125.1

Section10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen fluoride.

Section11. Toxicological information
No data.

Section12. Ecological information
No data.

Section13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

Section14. Transportation information
Non-harzardous for air and ground transportation.

Section15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes Xi
Risk Phrases 36/37/38
Safety Phrases 26

 Synthetic Route

 Synonyms

3-Fluoro-2-pyridinecarbaldehyde
3-fluoro-2-formylpyridine
3-fluoropyridin-2-carboaldehyde
3-Fluoropyridine-2-carboxaldehyde
2-Pyridinecarboxaldehyde, 3-fluoro-
T6NJ BVH CF
3-fluoro-pyridine-2-carbaldehyde
3-Fluoropyridine-2-carbaldehyde
2-formyl-3-fluoropyridine
3-fluoropicolinaldehyde
3-Fluoro-2-pyridinecarboxaldehyde
2-PYRIDINECARBOXALDEHYDE,3-FLUORO
MFCD07781234
3-fluoro-pyridin-2-ylcarboxaldehyde
Top Suppliers:I want be here



Get all suppliers and price by the below link:

3-fluoropicolinaldehyde suppliers


Price: ¥52/250mg

Reference only. check more 3-fluoropicolinaldehyde price