Sodium antimonate

Modify Date: 2024-01-04 15:41:55

Sodium antimonate Structure
Sodium antimonate structure
Common Name Sodium antimonate
CAS Number 15432-85-6 Molecular Weight 192.748
Density 3.7 g/mL at 25 °C(lit.) Boiling Point N/A
Molecular Formula NaO3Sb Melting Point >375 °C(lit.)
MSDS N/A Flash Point N/A

 Names

Name Sodium antimonate
Synonym More Synonyms

 Chemical & Physical Properties

Density 3.7 g/mL at 25 °C(lit.)
Melting Point >375 °C(lit.)
Molecular Formula NaO3Sb
Molecular Weight 192.748
Exact Mass 191.878342
PSA 57.20000
Stability Stable. Incompatible with strong oxidizing agents, strong acids, strong bases.
Water Solubility slightly soluble

 MSDS

Name: Sodium antimonate, 96+% Material Safety Data Sheet
Synonym: None reported
CAS: 15432-85-6
Section 1 - Chemical Product MSDS Name: Sodium antimonate, 96+% Material Safety Data Sheet
Synonym: None reported
SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
15432-85-6 Sodium antimonate 99.5% 239-444-7
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
SECTION 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW The toxicological properties of this material have not been fully investigated. Potential Health Effects
Eye:
No information regarding eye irritation and other potential effects was found.
Skin:
No information regarding skin irritation and other potential effects was found.
Ingestion:
The toxicological properties of this substance have not been fully investigated.
Inhalation:
The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.
SECTION 4 - FIRST AID MEASURES
Eyes:
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:


SECTION 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
Use agent most appropriate to extinguish fire.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container.
SECTION 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Avoid contact with skin and eyes. Avoid ingestion and inhalation. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 15432-85-6: Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: white
Odor: Odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: slightly soluble in water
Specific Gravity/Density:
Molecular Formula: NaO3Sb
Molecular Weight: 192.74
SECTION 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stability unknown.
Conditions to Avoid:
Not available.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Not available.
Hazardous Polymerization: Has not been reported
SECTION 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 15432-85-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Sodium antimonate - Not listed by ACGIH, IARC, or NTP.
SECTION 12 - ECOLOGICAL INFORMATION
SECTION 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations.
SECTION 14 - TRANSPORT INFORMATION IATA
Shipping Name: ANTIMONY COMPOUND, INORGANIC, SOLID, N.O.S.
Hazard Class: 6.1
UN Number: 1549
Packing Group: III IMO
Shipping Name: ANTIMONY COMPOUND, INORGANIC, SOLID, N.O.S.
Hazard Class: 6.1
UN Number: 1549
Packing Group: III RID/ADR
Shipping Name: ANTIMONY COMPOUND, INORGANIC, SOLID, N.O.S.
Hazard Class: 6.1
UN Number: 1549
Packing group: III
SECTION 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases: S 22 Do not breathe dust. WGK (Water Danger/Protection) CAS# 15432-85-6: No information available. Canada CAS# 15432-85-6 is listed on Canada's DSL List. CAS# 15432-85-6 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 15432-85-6 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003 The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no way shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if the company has been advised of the possibility of such damages.

SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes Xn:Harmful;
Risk Phrases R20/22
Safety Phrases S22-S61
RIDADR 1549
Packaging Group III
Hazard Class 6.1

 Synonyms

EINECS 239-444-7
SODIUM METAANTIMONATE
Antimonate,sodium
MFCD00058775
Sodiumantimonate,min.
Natriumantimonat
Trisodium antimonate
Top Suppliers:I want be here




Get all suppliers and price by the below link:

Sodium antimonate suppliers

Sodium antimonate price