4,6-DIAMINO-2-METHYLMERCAPTOPYRIMIDINE

Modify Date: 2024-01-03 23:10:25

4,6-DIAMINO-2-METHYLMERCAPTOPYRIMIDINE Structure
4,6-DIAMINO-2-METHYLMERCAPTOPYRIMIDINE structure
Common Name 4,6-DIAMINO-2-METHYLMERCAPTOPYRIMIDINE
CAS Number 1005-39-6 Molecular Weight 156.20900
Density 1.38g/cm3 Boiling Point 413.5ºC at 760mmHg
Molecular Formula C5H8N4S Melting Point 189-193ºC
MSDS N/A Flash Point 203.9ºC

 Names

Name 4,6-Diamino-2-Methylmercaptopyrimidine
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.38g/cm3
Boiling Point 413.5ºC at 760mmHg
Melting Point 189-193ºC
Molecular Formula C5H8N4S
Molecular Weight 156.20900
Flash Point 203.9ºC
Exact Mass 156.04700
PSA 103.12000
LogP 1.52530
Vapour Pressure 0mmHg at 25°C
Index of Refraction 1.671

 MSDS

Name: 4 6-Diamino-2-methylmercaptopyrimidine 98% Material Safety Data Sheet
Synonym: None Known
CAS: 1005-39-6
Section 1 - Chemical Product MSDS Name:4 6-Diamino-2-methylmercaptopyrimidine 98% Material Safety Data Sheet
Synonym:None Known

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
1005-39-6 4,6-Diamino-2-methylmercaptopyrimidine 98% 213-735-9
Hazard Symbols: XN
Risk Phrases: 22 36/37/38

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Harmful if swallowed. Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Minimize dust generation and accumulation. Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation. Wash clothing before reuse.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 1005-39-6: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Crystalline powder
Color: light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 189 - 193 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C5H8N4S
Molecular Weight: 156.21

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 1005-39-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4,6-Diamino-2-methylmercaptopyrimidine - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 1005-39-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1005-39-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1005-39-6 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes Xn: Harmful;
Risk Phrases R36/37/38
Safety Phrases S22-S24/25
RIDADR UN 2811
Packaging Group III
Hazard Class 6.1
HS Code 2933599090

 Synthetic Route

~87%

4,6-DIAMINO-2-METHYLMERCAPTOPYRIMIDINE Structure

4,6-DIAMINO-2-M...

CAS#:1005-39-6

Literature: Mohebbi, Shohreh; Falcon-Perez, Juan Manuel; Gonzalez, Esperanza; Millet, Oscar; Mato, Jose Maria; Kobarfard, Farzad Chemical and Pharmaceutical Bulletin, 2012 , vol. 60, # 1 p. 70 - 78

~%

4,6-DIAMINO-2-METHYLMERCAPTOPYRIMIDINE Structure

4,6-DIAMINO-2-M...

CAS#:1005-39-6

Literature: Journal of the American Chemical Society, , vol. 74, p. 1644,1646

~%

4,6-DIAMINO-2-METHYLMERCAPTOPYRIMIDINE Structure

4,6-DIAMINO-2-M...

CAS#:1005-39-6

Literature: American Chemical Journal, , vol. 32, p. 353

 Customs

HS Code 2933599090
Summary 2933599090. other compounds containing a pyrimidine ring (whether or not hydrogenated) or piperazine ring in the structure. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0%

 Synonyms

EINECS 213-735-9
4,6-Diamino-2-methylmercaptopyrimidine
MFCD00023241
2-methylsulfanylpyrimidine-4,6-diamine