5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt
5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt structure
|
Common Name | 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt | ||
|---|---|---|---|---|
| CAS Number | 129541-41-9 | Molecular Weight | 444.59 | |
| Density | N/A | Boiling Point | 732.2ºC at 760mmHg | |
| Molecular Formula | C14H12BrClNNaO7 | Melting Point | 228-230°C | |
| MSDS | Chinese USA | Flash Point | 396.6ºC | |
Use of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium saltX-Gluc sodium is a dye reagent for the detection of β-glucuronidase, an enzyme produced by Escherichia coli. X-Gluc sodium can be used to detect E. coli contamination in food, water and the urinary tract. X-Gluc sodium is also widely used in molecular biology experiments to label and detect the expression of target genes (GUS reporter system)[1]. |
This table lists Chinese names, IUPAC names and various aliases of this chemical substance.
| Name | 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt |
|---|---|
| Synonym | More Synonyms |
This table contains bioactivity, target information and biological‑assay experimental data of this compound.
| Description | X-Gluc sodium is a dye reagent for the detection of β-glucuronidase, an enzyme produced by Escherichia coli. X-Gluc sodium can be used to detect E. coli contamination in food, water and the urinary tract. X-Gluc sodium is also widely used in molecular biology experiments to label and detect the expression of target genes (GUS reporter system)[1]. |
|---|---|
| Related Catalog | |
| In Vitro | Guidelines (Following is our recommended protocol. This protocol only provides a guideline, and should be modified according to your specific needs). 1. Dissolve 20 mg X-Gluc sodium in 1mL dimethylformamide (DMF) to prepare X-Gluc master mix. 2. Add the prepared X-Gluc solution to agar medium plates at a final concentration of 50 μg/mL without sterilization. 3. Allow the plates to air dry and be used to inoculate the organisms. 4. Incubate the plates at 35°C and observe 16-24 h after inoculation. |
| References |
This table shows physicochemical parameters including melting point, boiling point, density, solubility and optical rotation. Missing data is marked as N/A.
| Boiling Point | 732.2ºC at 760mmHg |
|---|---|
| Melting Point | 228-230°C |
| Molecular Formula | C14H12BrClNNaO7 |
| Molecular Weight | 444.59 |
| Flash Point | 396.6ºC |
| Exact Mass | 442.93834 |
| PSA | 135.07000 |
| InChIKey | IBLSVGDGSKUDCT-CYRSAHDMSA-M |
| SMILES | C1=CC(=C(C2=C1NC=C2O[C@H]3[C@@H]([C@H]([C@@H]([C@H](O3)C(=O)[O-])O)O)O)Cl)Br.[Na+] |
| Storage condition | −20°C |
This table provides MSDS information including hazard classification, first‑aid, fire‑fighting, spill handling, operation and storage instructions.
This table covers safety warnings, protective measures, incompatible substances and disposal guidelines for this compound.
| Personal Protective Equipment | Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter |
|---|---|
| Hazard Codes | Xi |
| Risk Phrases | R36/37/38 |
| Safety Phrases | S24/25 |
| RIDADR | NONH for all modes of transport |
| WGK Germany | 3 |
| HS Code | 29339990 |
This table lists relevant public references with title, journal and publication metadata for this compound.
|
Automated Sampling Procedures Supported by High Persistence of Bacterial Fecal Indicators and Bacteroidetes Genetic Microbial Source Tracking Markers in Municipal Wastewater during Short-Term Storage at 5°C.
Appl. Environ. Microbiol. 81 , 5134-43, (2015) Because of high diurnal water quality fluctuations in raw municipal wastewater, the use of proportional autosampling over a period of 24 h at municipal wastewater treatment plants (WWTPs) to evaluate ... |
|
|
Quality changes of fresh-cut pomegranate arils during shelf life as affected by deficit irrigation and postharvest vapour treatments.
J. Sci. Food Agric. 95 , 2325-36, (2015) The effect of two sustained deficit irrigation (SDI) strategies, compared to a control, on postharvest physicochemical, microbial, sensory quality attributes and anthocyanin content of fresh-cut pomeg... |
|
|
Comparison of Six Chromogenic Agar Media for the Isolation of a Broad Variety of Non-O157 Shigatoxin-Producing Escherichia coli (STEC) Serogroups.
Int. J. Environ. Res. Public Health 12 , 6965-78, (2015) The isolation of non-O157 STEC from food samples has proved to be challenging. The selection of a suitable selective isolation agar remains problematic. The purpose of this study was to qualitatively ... |
This table collects all English aliases, systematic names and CAS‑related synonyms of the compound.
| 5-Bromo-4-chloro-3-indolyl β-D-Glucopyranosiduronic Acid Sodium Salt |
| 5-Bromo-4-chloro-3-indolyl β-D-glucuronide cyclohexylammonium salt |
| 5-Bromo-4-chloro-3-indolyl Beta-D-glucuronide cyclohexylammonium salt |
| 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide cyclohexylammonium salt hydrate |
| BC-Indicator,X-GlcA,X-glucuronide |
| X-gluc/X-GlcA |
| X-Glu,CHA Salt |
| X-Gluc Sodium Salt |
| Cyclohexanamine - 5-bromo-4-chloro-1H-indol-3-yl β-D-glucopyranosiduronic acid (1:1) |
| X-GlcA,X-glucuronide CHA salt |
| 5-Bromo-4-chloro-3-indolyl β-D-Glucuronide Sodium Salt |
| 5-BROMO-4-CHLORO-3-INDOLYLB-D-GLUCURONID E |
| 5-Bromo-4-chloro-3-indolyl β-D-Glucopyranosiduronic Acid Cyclohexylammonium Salt |
| 5-BROMO-4-CHLORO-3-INDOLYL-B-D-GLUCURO-N IDE CYCLOHEXYLA.S. |
| X-Gluc CHA Salt |
| X-GlcA Sodium Salt |
| 5-Bromo-4-chloro-3-indolyl-β-D-glucuronic acid cyclohexylammonium salt |
| 5-Bromo-4-chloro-3-indolyl-β-D-glucuronide sodium salt |
| 5-BroMo-4-chloro-3-indolyl beta-D-Glucuronide SodiuM Salt |
| Cyclohexanaminium 5-bromo-4-chloro-1H-indol-3-yl β-D-glucopyranosiduronate |
| X-glucuronide CHA salt |
| 5-Bromo-4-chloro-3-indolyl-b-D-glucuronide sodium salt |
| 5-Bromo-4-chlo |
| X-GlcA CHA Salt |
| β-D-Glucopyranosiduronic acid, 5-bromo-4-chloro-1H-indol-3-yl, compd. with cyclohexanamine (1:1) |
| 5-Bromo-4-chloro-3-indolyl-β-D-glucuronide cyclohexylammonium salt |
| MFCD00135782 |
This section contains frequently‑asked‑questions about this compound, including basic parameters, properties, storage conditions and corresponding answers.
| Q: What is the melting point of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt? |
| A: Melting point of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt is 228-230°C. |
| Q: What is the English name of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt? |
| A: The English name of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt is 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt. |
| Q: What is the SMILES notation of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt? |
| A: SMILES notation of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt is C1=CC(=C(C2=C1NC=C2O[C@H]3[C@@H]([C@H]([C@@H]([C@H](O3)C(=O)[O-])O)O)O)Cl)Br.[Na+]. |
| Q: What is the safety information for 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt? |
| A: Safety information for 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt: S24/25. |
| Q: What is the InChIKey of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt? |
| A: InChIKey of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt is IBLSVGDGSKUDCT-CYRSAHDMSA-M. |
| Q: What is the CAS number of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt? |
| A: CAS number of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt is 129541-41-9. |
| Q: What are the storage conditions for 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt? |
| A: Storage conditions for 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt: −20°C. |
| Q: What is the molecular weight of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt? |
| A: Molecular weight of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt is 444.59. |
| Q: What is the molecular formula of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt? |
| A: Molecular formula of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt is C14H12BrClNNaO7. |
| Q: What is the polar surface area (PSA) of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt? |
| A: Polar surface area (PSA) of 5-Bromo-4-chloro-3-indolyl-beta-D-glucuronide sodium salt is 135.07000. |
This table lists manufacturers and suppliers of this compound, including vendor names and product supply reference information.
| Shanghai Nianxing Industrial Co., Ltd |
| Dayang Chem (Hangzhou) Co., Ltd. |
| Henan Tianfu Chemical Co., Ltd. |