中文名 | 4-正丁氧基苯磺酰氯 |
---|---|
英文名 | 4-butoxybenzenesulfonyl chloride |
中文别名 |
4-丁氧基苯-1-磺酰氯
4-(N-丁氧基)苯磺酰氯 4-丁氧基苯磺酰氯 |
英文别名 |
para-n-butoxyphenylsulfonyl chloride
4-Butoxybenzenesulfonyl chloride p-n-butoxybenzenesulfonyl chloride 4-(n-butoxy)-benzenesulfonyl chloride Benzenesulfonyl chloride, 4-butoxy- 4-butoxybenzene-1-sulfonyl chloride MFCD00052344 4-Butoxybenzenesulfonylchloride 4-(n-butoxy)-phenylsulfonyl chloride 4-(N-butoxy)benzenesulphonyl chloride |
密度 | 1.2±0.1 g/cm3 |
---|---|
沸点 | 354.0±15.0 °C at 760 mmHg |
熔点 | 19 °C |
分子式 | C10H13ClO3S |
分子量 | 248.726 |
闪点 | 167.9±20.4 °C |
精确质量 | 248.027390 |
PSA | 51.75000 |
LogP | 4.10 |
蒸汽压 | 0.0±0.8 mmHg at 25°C |
折射率 | 1.520 |
储存条件 | 保持贮藏器密封、储存在阴凉、干燥的地方,确保工作间有良好的通风或排气装置 |
稳定性 | 如果遵照规格使用和储存则不会分解,未有已知危险反应,避免氧化物、水分/潮湿、碱 |
分子结构 | 1、 摩尔折射率:60.65 2、 摩尔体积(m3/mol):199.6 3、 等张比容(90.2K):501.0 4、 表面张力(dyne/cm): 39.6 5、 介电常数:无可用 6、 偶极距(10 -24cm 3):无可用 7、 极化率:24.04 |
计算化学 | 1.疏水参数计算参考值(XlogP):无 2.氢键供体数量:0 3.氢键受体数量:3 4.可旋转化学键数量:5 5.互变异构体数量:无 6.拓扑分子极性表面积51.8 7.重原子数量:15 8.表面电荷:0 9.复杂度:263 10.同位素原子数量:0 11.确定原子立构中心数量:0 12.不确定原子立构中心数量:0 13.确定化学键立构中心数量:0 14.不确定化学键立构中心数量:0 15.共价键单元数量:1 |
更多 | 1. 性状:液体 2. 密度(g/mL,25℃):未确定 3. 相对蒸汽密度(g/mL,空气=1):未确定 4. 熔点(ºC):未确定 5. 沸点(ºC,常压):156 6. 沸点(ºC,42mm):未确定 7. 折射率(n20/D):1.5420 8. 闪点(ºC,0.6mm):130-131 9. 比旋光度(º):未确定 10. 自燃点或引燃温度(ºC):未确定 11. 蒸气压(mmHg,20ºC):未确定 12. 饱和蒸气压(kPa,60ºC):未确定 13. 燃烧热(KJ/mol):未确定 14. 临界温度(ºC):未确定 15. 临界压力(KPa):未确定 16. 油水(辛醇/水)分配系数的对数值:未确定 17. 爆炸上限(%,V/V):未确定 18. 爆炸下限(%,V/V):未确定 19. 溶解性:反应 |
Synonym: Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 34 Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW
Causes burns.Moisture sensitive. Potential Health Effects Eye: Causes eye burns. Skin: Causes skin burns. Ingestion: Causes gastrointestinal tract burns. Inhalation: Causes chemical burns to the respiratory tract. Chronic: Not available. Section 4 - FIRST AID MEASURES Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Skin: Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Ingestion: Do not induce vomiting. Get medical aid immediately. Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Notes to Physician: Treat symptomatically and supportively. Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing Media: Use foam, dry chemical, or carbon dioxide. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Section 7 - HANDLING and STORAGE Handling: Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Use only in a chemical fume hood. Storage: Store in a cool, dry place. Store in a tightly closed container. Corrosives area. Store under nitrogen. Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 1138-56-3: Personal Protective Equipment Eyes: Not available. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Liquid Color: Not available. Odor: Not available. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: 130 - 132 deg C @0.6mmHg Freezing/Melting Point: Not available. Autoignition Temperature: Not available. Flash Point: Not available. Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: Specific Gravity/Density: Molecular Formula: C10H13ClO3S Molecular Weight: 249 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Not available. Conditions to Avoid: Incompatible materials, exposure to moist air or water. Incompatibilities with Other Materials: Strong oxidizing agents, bases. Hazardous Decomposition Products: Hydrogen chloride, chlorine, carbon monoxide, oxides of sulfur, carbon dioxide. Hazardous Polymerization: Has not been reported Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 1138-56-3 unlisted. LD50/LC50: Not available. Carcinogenicity: 4-Butoxybenzene-1-sulfonyl chloride - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.* Hazard Class: 8 UN Number: 3265 Packing Group: III IMO Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. Hazard Class: 8 UN Number: 3265 Packing Group: III RID/ADR Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. Hazard Class: 8 UN Number: 3265 Packing group: III Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: C Risk Phrases: R 34 Causes burns. Safety Phrases: S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). WGK (Water Danger/Protection) CAS# 1138-56-3: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 1138-56-3 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 1138-56-3 is not listed on the TSCA inventory. It is for research and development use only. SECTION 16 - ADDITIONAL INFORMATION N/A |
生态学数据: 对水是稍微有危害的不要让未稀释或大量的产品接触地下水、水道或者污水系统,若无政府许可,勿将材料排入周围环境
|
危害码 (欧洲) | C:Corrosive; |
---|---|
风险声明 (欧洲) | R34 |
安全声明 (欧洲) | S26-S36/37/39 |
危险品运输编码 | 3265 |
包装等级 | III |
危险类别 | 8 |
海关编码 | 2909309090 |
~61% 1138-56-3 |
文献:Guo, Xiaoke; Yang, Qian; Xu, Jing; Zhang, Li; Chu, Hongxi; Yu, Peng; Zhu, Yingying; Wei, Jinglian; Chen, Weilin; Zhang, Yaozhong; Zhang, Xiaojin; Sun, Haopeng; Tang, Yiqun; You, Qidong Bioorganic and Medicinal Chemistry, 2013 , vol. 21, # 21 p. 6466 - 6476 |
~44% 1138-56-3 |
文献:LEAD Therapeutics, Inc. Patent: US2010/105607 A1, 2010 ; US 20100105607 A1 |
~% 1138-56-3 |
文献:Bulletin de la Societe Chimique de France, , p. 248 - 250 |
~% 1138-56-3 |
文献:Bioorganic and Medicinal Chemistry, , vol. 21, # 21 p. 6466 - 6476 |
上游产品 4 | |
---|---|
下游产品 4 | |
海关编码 | 2909309090 |
---|---|
中文概述 | 2909309090 其他芳香醚及其卤化衍生物、磺化、硝化衍生物(包括亚硝化衍生物)。监管条件:无。增值税率:17.0%。退税率:9.0%。最惠国关税:5.5%。普通关税:30.0% |
申报要素 | 品名, 成分含量, 用途 |
Summary | 2909309090 other aromatic ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:5.5% General tariff:30.0% |