89-49-6

89-49-6结构式
89-49-6结构式

化源商城直购

中文名 乙酸异胡薄荷酯
英文名 (5-methyl-2-prop-1-en-2-ylcyclohexyl) acetate
英文别名 Isopropenylcyclohexan-3-ol acetate
Essigsaeure-<2-isopropenyl-5-methyl-cyclohexylester>
dl-Isopulegyl-acetat
1-Methyl-4-isopropenylcyclohexan-3-yl acetate
Isopulegyl acetate
neo-isopulegol acetate
p-Menth-8-en-3-yl acetate
neo-iso-isopulegol acetate
2-Isopropenyl-5-methylcyclohexyl acetate
Isopulegol acetate
Essigsaeure-p-menth-8-en-3-ylester
acetic acid p-menth-8-en-3-yl ester
MFCD00001478
密度 0.925 g/mL at 25ºC(lit.)
沸点 104-105ºC10 mm Hg(lit.)
分子式 C12H20O2
分子量 196.28600
闪点 85.6ºC
精确质量 196.14600
PSA 26.30000
LogP 2.93040
折射率 n20/D 1.456(lit.)
储存条件

密封贮藏,储存在阴凉、干燥地方。

稳定性

常温常压下稳定,避免与氧化剂接触。

计算化学

1.疏水参数计算参考值(XlogP):3.5

2.氢键供体数量:0

3.氢键受体数量:2

4.可旋转化学键数量:3

5.互变异构体数量:无

6.拓扑分子极性表面积26.3

7.重原子数量:14

8.表面电荷:0

9.复杂度:233

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:3

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

更多

1. 性状:无色透明液体

2. 密度(g/mL,25℃):0.925

3. 相对蒸汽密度(g/mL,空气=1):未确定

4. 熔点(ºC):0

5. 沸点(ºC,常压):232

6. 沸点(ºC,50mmHg):未确定

7. 折射率(n20/D):1.456(lit.)

8. 闪点(ºF):186

9. 比旋光度(º):未确定

10. 自燃点或引燃温度(ºC):未确定

11. 蒸气压(mmHg,40ºC):未确定

12. 饱和蒸气压(kPa,125ºC):

13. 燃烧热(KJ/mol):未确定

14. 临界温度(ºC):未确定

15. 临界压力(KPa):未确定

16. 油水(辛醇/水)分配系数的对数值:未确定

17. 爆炸上限(%,V/V):未确定

18. 爆炸下限(%,V/V):未确定

19. 溶解性:未确定

Name: Isopulegyl acetate 98% mixture of isomers Material Safety Data Sheet
Synonym: Cyclohexanol, 5-methyl-2-(1-methylethenyl)-, acetat
CAS: 89-49-6
Section 1 - Chemical Product MSDS Name:Isopulegyl acetate 98% mixture of isomers Material Safety Data Sheet
Synonym:Cyclohexanol, 5-methyl-2-(1-methylethenyl)-, acetat

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
89-49-6 Isopulegyl acetate, mixture of isomers 98 unlisted
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Aspiration may lead to pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Water may be ineffective. Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Remove all sources of ignition. Absorb spill using an absorbent, non-combustible material such as earth, sand, or vermiculite. Do not use combustible materials such as sawdust. Use a spark-proof tool.
Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 89-49-6: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Clear liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 232 deg C @ 760.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 85 deg C ( 185.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: .9250g/cm3
Molecular Formula: C12H20O2
Molecular Weight: 196.29

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Strong acids, strong bases, strong oxidizing agents, strong reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 89-49-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Isopulegyl acetate, mixture of isomers - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 89-49-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 89-49-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 89-49-6 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A
安全声明 (欧洲) S24/25
WGK德国 3

以香茅醛为原料,在乙酸钠溶液中,与乙酸回流制得。