6827-10-7

6827-10-7结构式
6827-10-7结构式

化源商城直购

英文名 dichloromercury,pyrazine
沸点 118.6ºC at 760 mmHg
分子式 C4H4Cl2HgN2
分子量 351.58400
闪点 55.6ºC
精确质量 351.94600
PSA 25.78000
LogP 1.85310
Version 1.1
Regulation (EC) No 1907/2006

1 - Product and Company Information

Product NamePYRAZINE, MERCURIC CHLORIDE CO - 250 MG
MPLEX

2 - Hazards Identification

SPECIAL INDICATION OF HAZARDS TO HUMANS AND THE ENVIRONMENT
Very toxic by inhalation, in contact with skin and if swallowed.
Danger of cumulative effects. Very toxic to aquatic organisms, may
cause long-term adverse effects in the aquatic environment.

3 - Composition/Information on Ingredients

Product NameCAS #EC noAnnex I
Index Number
PYRAZINE, MERCURIC CHLORIDE6827-10-7 None080-002-00-6
COMPLEX
FormulaC4H4N2.HgCl2
Molecular Weight 351,5800 AMU

4 - First Aid Measures

AFTER INHALATION
If inhaled, remove to fresh air. If not breathing give
artificial respiration. If breathing is difficult, give oxygen.
AFTER SKIN CONTACT
In case of skin contact, flush with copious amounts of water for
at least 15 minutes. Remove contaminated clothing and shoes.
Call a physician.
AFTER EYE CONTACT
In case of contact with eyes, flush with copious amounts of
water for at least 15 minutes. Assure adequate flushing by
separating the eyelids with fingers. Call a physician.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
ALDRICHwww.molbase.com
conscious. Call a physician immediately.

5 - Fire Fighting Measures

EXTINGUISHING MEDIA
Suitable: Water spray. Carbon dioxide, dry chemical powder, or
appropriate foam.
SPECIAL RISKS
Specific Hazard(s): Emits toxic fumes under fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

6 - Accidental Release Measures

PERSONAL PRECAUTION PROCEDURES TO BE FOLLOWED IN CASE OF LEAK OR SPILL
Evacuate area.
PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear self-contained breathing apparatus, rubber boots, and heavy
rubber gloves.
METHODS FOR CLEANING UP
Sweep up, place in a bag and hold for waste disposal. Avoid
raising dust. Ventilate area and wash spill site after material
pickup is complete.

7 - Handling and Storage

HANDLING
Directions for Safe Handling: Do not breathe dust. Do not get in
eyes, on skin, on clothing. Avoid prolonged or repeated exposure.
STORAGE
Conditions of Storage: Keep tightly closed.

8 - Exposure Controls / Personal Protection

ENGINEERING CONTROLS
Safety shower and eye bath. Use only in a chemical fume hood.
GENERAL HYGIENE MEASURES
Wash contaminated clothing before reuse. Wash thoroughly after
handling.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Where risk assessment shows air-purifying respirators
are appropriate use a full-face particle respirator type N100 (US)
or type P3 (EN 143) respirator cartridges as a backup to
engineering controls. If the respirator is the sole means of
protection, use a full-face supplied air respirator.
Hand Protection: Compatible chemical-resistant gloves.
Eye Protection: Chemical safety goggles.

9 - Physical and Chemical Properties

ALDRICHwww.molbase.com
AppearancePhysical State: Solid
PropertyValueAt Temperature or Pressure
pH N/A
BP/BP RangeN/A
MP/MP RangeN/A
Flash PointN/A
FlammabilityN/A
Autoignition TempN/A
Oxidizing Properties N/A
Explosive Properties N/A
Explosion LimitsN/A
Vapor PressureN/A
Partition Coefficient N/A
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

10 - Stability and Reactivity

STABILITY
Stable: Stable.
Materials to Avoid: Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide,
Nitrogen oxides, Hydrogen chloride gas Mercury/mercury oxides.
HAZARDOUS POLYMERIZATION
Hazardous Polymerization: Will not occur

11 - Toxicological Information

ROUTE OF EXPOSURE
Skin Contact: May cause skin irritation.
Skin Absorption: May be fatal if absorbed through skin.
Eye Contact: May cause eye irritation.
Inhalation: Material may be irritating to mucous membranes and
upper respiratory tract. May be fatal if inhaled.
Ingestion: May be fatal if swallowed.

12 - Ecological Information

No data available.

13 - Disposal Considerations

SUBSTANCE DISPOSAL
Contact a licensed professional waste disposal service to dispose
of this material. Dissolve or mix the material with a combustible
ALDRICHwww.molbase.com
solvent and burn in a chemical incinerator equipped with an
afterburner and scrubber. Observe all federal, state, and local
environmental regulations.

14 - Transport Information

RID/ADR
UN#: 2025
Class: 6.1
PG: II
Proper Shipping Name: Mercury compound, solid, n.o.s.
IMDG
UN#: 2025
Class: 6.1
PG: II
Proper Shipping Name: MERCURY COMPOUND, SOLID, N.O.S.
Marine Pollutant: No
Severe Marine Pollutant: Yes
Technical Name: Required
IATA
UN#: 2025
Class: 6.1
PG: II
Proper Shipping Name: Mercury compound, solid, n.o.s.
Inhalation Packing Group I: No
Technical Name: Required

15 - Regulatory Information

CLASSIFICATION AND LABELING ACCORDING TO EU DIRECTIVES
ANNEX I INDEX NUMBER: 080-002-00-6
NOTA: A, 1
INDICATION OF DANGER: T+-N
Very toxic. Dangerous for the environment.
R-PHRASES: 26/27/28-33-50/53
Very toxic by inhalation, in contact with skin and if
swallowed. Danger of cumulative effects. Very toxic to aquatic
organisms, may cause long-term adverse effects in the aquatic
environment.
S-PHRASES: 13-28-45-60-61
Keep away from food, drink, and animal feedingstuffs. After
contact with skin, wash immediately with plenty of soap-suds.
In case of accident or if you feel unwell, seek medical advice
immediately (show the label where possible). This material and
its container must be disposed of as hazardous waste. Avoid
release to the environment. Refer to special
instructions/safety data sheets.
Caution: Substance not yet fully tested (EU).

16 - Other Information

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
ALDRICHwww.molbase.com
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICHwww.molbase.com


SECTION 16 - ADDITIONAL INFORMATION
N/A