品牌现货直购
供应商:我要出现这里

查看所有供应商和价格请点击:

1192-88-7生产厂家

1192-88-7价格

1192-88-7

1192-88-7结构式
1192-88-7结构式
  • 常用中文名:1-环己烯-1-甲醛
  • 常用英文名:cyclohexene carbaldehyde
  • CAS号:1192-88-7
  • 分子式:C7H10O
  • 分子量:110.154
  • 发布时间:2018-03-22 08:00:00
  • 更新时间:2024-01-01 19:54:22
  • 1-环己烯-1-甲醛是一种 α,β-不饱和醛。参与苯并吡喃的合成。

化源商城直购

中文名 1-环己烯-1-甲醛
英文名 cyclohexene-1-carbaldehyde
英文别名 cyclohexene carbaldehyde
1-Cyclohexene-1-carbaldehyde
1-Cyclohexene-1-carboxaldehyde
Cyclohex-1-ene-1-carbaldehyde
1-cyclohexenecarbaldehyde
MFCD00674109
cyclohex-1-enecarbaldehyde
Cyclohexenecarboxaldehyde
1-cyclohexenecarboxaldehyde
cyclohex-1-en-1-carboxaldehyde
cyclohex-1-encarbaldehyde
cyclohexene carboxaldehyde
1-Cyclo hexene-1-cabox aldehyde
密度 1.1±0.1 g/cm3
沸点 179.3±19.0 °C at 760 mmHg
熔点 50°C(lit.)
分子式 C7H10O
分子量 110.154
闪点 60.7±16.5 °C
精确质量 110.073166
PSA 17.07000
LogP 1.64
外观性状 无色液体
蒸汽压 1.0±0.3 mmHg at 25°C
折射率 1.563
储存条件

常温 ,阴凉,避光,通风干燥处

稳定性

1. 常温常压下稳定。

2. 存在于烟气中。

计算化学

1.疏水参数计算参考值(XlogP):1.6

2.氢键供体数量:0

3.氢键受体数量:1

4.可旋转化学键数量:1

5.互变异构体数量:无

6.拓扑分子极性表面积17.1

7.重原子数量:8

8.表面电荷:0

9.复杂度:114

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

更多

1. 性状:淡黄色液体

2. 密度(g/mL,15℃):0.966

3. 相对蒸汽密度(g/mL,空气=1):未确定

4. 熔点(ºC):未确定

5. 沸点(ºC,常压):110

6. 折射率 (n20D) :1.5005

7. 闪点(ºC):65

8. 自燃点或引燃温度(ºC):未确定

9. 比旋光度(º): 未确定

10. 蒸气压(kPa,25ºC):未确定

11. 饱和蒸气压(kPa,60ºC):未确定

12. 燃烧热(KJ/mol):未确定

13. 临界温度(ºC):未确定

14. 临界压力(KPa):未确定

15. 油水(辛醇/水)分配系数的对数值:未确定

16. 爆炸上限(%,V/V):未确定

17. 爆炸下限(%,V/V):未确定

18. 溶解性:未确定


SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name: 1-Cyclohexene-1-carboxaldehyde
REACH No.: A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No.: 1192-88-7
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
Not a hazardous substance or mixture according to EC-directives 67/548/EEC or 1999/45/EC.
Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
Other hazards - none

SECTION 3: Composition/information on ingredients
Substances
Formula: C7H10O
Molecular Weight: 110,15 g/mol
CAS-No.: 1192-88-7
No components need to be disclosed according to the applicable regulations.

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
Use water spray to cool unopened containers.

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Avoid breathing vapours, mist or gas. Remove all sources of ignition. Beware of vapours accumulating to
form explosive concentrations. Vapours can accumulate in low areas.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and
place in container for disposal according to local regulations (see section 13). Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Avoid inhalation of vapour or mist.
Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic
charge.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) AppearanceForm: liquid
Colour: colourless
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingno data available
point
f) Initial boiling point and 61 °C at 13 hPa - lit.
boiling range
g) Flash point65 °C - closed cup
h) Evapouration rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative density0,966 g/mL at 25 °C
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
Heat, flames and sparks.
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

SECTION 13: Disposal considerations
Waste treatment methods
Product
This combustible material may be burned in a chemical incinerator equipped with an afterburner and
scrubber. Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: -IMDG: -IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA:Not dangerous goods
Transport hazard class(es)
ADR/RID: -IMDG: -IATA: -
Packaging group
ADR/RID: -IMDG: -IATA: -
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out

SECTION 16: Other information
Further information
Copyright 2013 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

生态学数据:

通常对水是不危害的,若无政府许可,勿将材料排入周围环境

危害码 (欧洲) C,Xn
风险声明 (欧洲) R22:Harmful if swallowed. R34:Causes burns. R36/37/38:Irritating to eyes, respiratory system and skin .
安全声明 (欧洲) S26-S36/37/39-S45-S37/39
危险品运输编码 UN 3261 8/PG 2
WGK德国 3
包装等级 III
危险类别 8
海关编码 29251995
海关编码 2912299000
中文概述 2912299000. 其他不含其他含氧基的环醛. 增值税率:17.0%. 退税率:13.0%. 监管条件:无. 最惠国关税:5.5%. 普通关税:30.0%
申报要素 品名, 成分含量, 用途, 四聚甲醛报明外观
Summary 2912299000. other cyclic aldehydes without other oxygen function. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:5.5%. General tariff:30.0%