查看所有供应商和价格请点击：
| 中文名 | 2,3,5,6-四甲基苯磺酰氯 |
|---|---|
| 英文名 | 2,3,5,6-tetramethylbenzenesulfonyl chloride |
| 中文别名 | 2,3,5,6-四甲苯磺酰氯 |
| 英文别名 |
2,3,5,6-tetramethyl-benzenesulfonyl chloride
2,3,5,6-Tetramethyl-benzolsulfonylchlorid 2,3,5,6-tetramethylphenylsulfonyl chloride 2,3,5,6-tetramethylbenzene-1-sulfonyl chloride MFCD00014723 F9995-0417 2,3,5,6-Tetramethyl-benzolsulfochlorid Durolsulfonylchlorid |
| 密度 | 1.217g/cm3 |
|---|---|
| 沸点 | 343.8ºC at 760 mmHg |
| 熔点 | 97-101 °C |
| 分子式 | C10H13ClO2S |
| 分子量 | 232.72700 |
| 闪点 | 161.7ºC |
| 精确质量 | 232.03200 |
| PSA | 42.52000 |
| LogP | 3.92850 |
| 外观性状 | 白色至淡奶油色结晶粉末 |
| 折射率 | 1.528 |
| 储存条件 | 干性气体保护下，在密封的贮藏器内，并放置阴凉，干燥的地方保存 |
| 稳定性 | 避免接触氧化物，碱，活性金属，水分 |
| 分子结构 | 1.摩尔折射率：58.89 2.摩尔体积（m3/mol）：191.1 3.等张比容（90.2K）：475.2 4.表面张力（dyne/cm）：38.1 5.极化率（10-24cm3）：23.34 |
| 计算化学 | 1.疏水参数计算参考值（XlogP）:3.4 2.氢键供体数量:0 3.氢键受体数量:2 4.可旋转化学键数量:1 5.互变异构体数量:无 6.拓扑分子极性表面积42.5 7.重原子数量:14 8.表面电荷:0 9.复杂度:280 10.同位素原子数量:0 11.确定原子立构中心数量:0 12.不确定原子立构中心数量:0 13.确定化学键立构中心数量:0 14.不确定化学键立构中心数量:0 15.共价键单元数量:1 |
| 更多 | 1. 性状：白色晶体状粉末 2. 密度（g/cm3 ）：未确定 3. 相对蒸汽密度（g/mL,空气=1）：未确定 4. 熔点（ºC）：97-101 5. 沸点（ºC，13mmHg）：未确定 6. 沸点（ºC,5.2kPa）：未确定 7. 折射率（°）：未确定 8. 闪点（℉）：未确定 9. 比旋光度（º）：未确定 10. 自燃点或引燃温度（ºC）：未确定 11. 蒸气压（kPa,25ºC）：未确定 12. 饱和蒸气压（kPa,60ºC）：未确定 13. 燃烧热（KJ/mol）：未确定 14. 临界温度（ºC）：未确定 15. 临界压力（KPa）：未确定 16. 油水（辛醇/水）分配系数的对数值（25℃）：未确定 17. 爆炸上限（%,V/V）：未确定 18. 爆炸下限（%,V/V）：未确定 19. 溶解性(mg/mL 20 ºC)：水：未确定 |
Synonym: Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 34 Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW
Causes burns.Moisture sensitive. Potential Health Effects Eye: Causes eye burns. Skin: Causes skin burns. Ingestion: Causes gastrointestinal tract burns. Inhalation: Causes chemical burns to the respiratory tract. Chronic: Not available. Section 4 - FIRST AID MEASURES Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Skin: Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Ingestion: Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Notes to Physician: Treat symptomatically and supportively. Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Section 7 - HANDLING and STORAGE Handling: Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Use only in a chemical fume hood. Storage: Store in a cool, dry place. Store in a tightly closed container. Corrosives area. Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 60706-63-0: Personal Protective Equipment Eyes: Not available. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Solid Color: Not available. Odor: Not available. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: Not available. Freezing/Melting Point: 98 - 99 deg C Autoignition Temperature: Not available. Flash Point: Not available. Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: Specific Gravity/Density: Molecular Formula: C10H13ClO2S Molecular Weight: 232.6028 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Not available. Conditions to Avoid: Incompatible materials, exposure to moist air or water. Incompatibilities with Other Materials: Strong oxidizing agents, strong bases. Hazardous Decomposition Products: Hydrogen chloride, carbon monoxide, oxides of sulfur, carbon dioxide. Hazardous Polymerization: Has not been reported Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 60706-63-0 unlisted. LD50/LC50: Not available. Carcinogenicity: 2,3,5,6-Tetramethylbenzenesulfonyl chloride - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.* Hazard Class: 8 UN Number: 3261 Packing Group: III IMO Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. Hazard Class: 8 UN Number: 3261 Packing Group: III RID/ADR No information available. Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: C Risk Phrases: R 34 Causes burns. Safety Phrases: S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). WGK (Water Danger/Protection) CAS# 60706-63-0: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 60706-63-0 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 60706-63-0 is not listed on the TSCA inventory. It is for research and development use only. SECTION 16 - ADDITIONAL INFORMATION N/A |
|
生态学数据: 对水是稍微危害的，若无政府许可，勿将材料排入周围环境。
|
| 危害码 (欧洲) | C:Corrosive; |
|---|---|
| 风险声明 (欧洲) | R34 |
| 安全声明 (欧洲) | S45-S36/37/39-S26 |
| 危险品运输编码 | 3261 |
| 包装等级 | II |
| 危险类别 | 8 |
| 海关编码 | 2904909090 |
|
~%
60706-63-0 |
| 文献：Chemische Berichte, , vol. 18, p. 2843 |
| 上游产品 1 | |
|---|---|
| 下游产品 0 | |
| 海关编码 | 2904909090 |
|---|---|
| 中文概述 | 2904909090 其他烃的磺化、硝化、亚硝化衍生物（不论是否卤化）. 增值税率:17.0% 退税率:9.0% 监管条件:无 最惠国关税:5.5% 普通关税:30.0% |
| 申报要素 | 品名, 成分含量, 用途 |
| Summary | HS:2904909090 sulphonated, nitrated or nitrosated derivatives of hydrocarbons, whether or not halogenated VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:5.5% General tariff:30.0% |
