423-82-5

423-82-5结构式
423-82-5结构式

化源商城直购

中文名 N-乙基全氟辛基磺酰胺基乙基丙烯酸酯
英文名 2-[ethyl(1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-heptadecafluorooctylsulfonyl)amino]ethyl prop-2-enoate
中文别名 2-丙烯酸-2-[乙基[(十七氟辛基)-磺酰(基)氨基]-乙基酯]
2-(N-乙基全氟辛烷磺胺)乙基丙烯酸酯
2-丙烯酸-2-[乙基[(十七氟辛基)-磺酰(基)氨基]-乙基酯]
英文别名 EINECS 207-031-0
2-(Ethyl((heptadecafluorooctyl)sulphonyl)amino)ethyl acrylate
2-(N-ETHYLPERFLUOROOCTANESULFONAMIDO)ETHYLACRYLATE STABILIZED
MFCD00080737
2-{ethyl[(heptadecafluorooctyl)sulfonyl]amino}ethyl acrylate
密度 0.793 g/cm3
沸点 363.6ºC at 760 mmHg
分子式 C15H12F17NO4S
分子量 625.29800
闪点 173.7ºC
精确质量 625.02200
PSA 72.06000
LogP 6.41500
外观性状 固体
蒸汽压 1.78E-05mmHg at 25°C
折射率 n20/D 1.378(lit.)
储存条件

密封储存,储存于阴凉、干燥的库房。

稳定性

常温常压下稳定,避免与强氧化剂接触。

计算化学

1.疏水参数计算参考值(XlogP):6.3

2.氢键供体数量:0

3.氢键受体数量:22

4.可旋转化学键数量:14

5.互变异构体数量:无

6.拓扑分子极性表面积72.1

7.重原子数量:38

8.表面电荷:0

9.复杂度:984

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

更多

1. 性状:固体

2. 密度(g/mL,25℃):0.793

3. 相对蒸汽密度(g/mL,空气=1):未确定

4. 熔点(ºC):86-90

5. 沸点(ºC,常压):320

6. 沸点(ºC,40mmHg):未确定

7. 折射率(n20/D):1.378(lit.)

8. 闪点(ºF):未确定

9. 比旋光度(º):未确定

10. 自燃点或引燃温度(ºC):未确定

11. 蒸气压(mmHg,25ºC):未确定

12. 饱和蒸气压(kPa,25ºC):未确定

13. 燃烧热(KJ/mol):未确定

14. 临界温度(ºC):未确定

15. 临界压力(KPa):未确定

16. 油水(辛醇/水)分配系数的对数值:未确定

17. 爆炸上限(%,V/V):未确定

18. 爆炸下限(%,V/V):未确定

19. 溶解性:未确定

Name: 2-(N-Ethylperfluorooctanesulfonamido)ethyl acrylate stabilized Material Safety Data Sheet
Synonym: 2-Propenoic acid, 2-[ethyl[(heptadecafluorooctyl)sulfonyl]amino]ethyl ester; 2-(Ethyl((heptadecafluorooctyl)sulfonyl)amino)ethyl acrylate; monomer for incorporating perfluoroalkyl groups in polymers
CAS: 423-82-5
Section 1 - Chemical Product MSDS Name:2-(N-Ethylperfluorooctanesulfonamido)ethyl acrylate stabilized Material Safety Data Sheet
Synonym:2-Propenoic acid, 2-[ethyl[(heptadecafluorooctyl)sulfonyl]amino]ethyl ester; 2-(Ethyl((heptadecafluorooctyl)sulfonyl)amino)ethyl acrylate; monomer for incorporating perfluoroalkyl groups in polymers

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
423-82-5 2-(N-Ethylperfluorooctanesulfonamido)e 100 207-031-0
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the skin. The toxicological properties of this material have not been fully investigated.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. May be harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. May be harmful if inhaled.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Polymerizes readily if not inhibited; heat can initiate reaction.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions. Provide ventilation. Do not let this chemical enter the environment.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep refrigerated. (Store below 4C/39F.)

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 423-82-5: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 0.793
Molecular Formula: C15H12F17NO4S
Molecular Weight: 625.29

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures. This material is a monomer and may polymerize under certain conditions if the stabilizer is lost.
Conditions to Avoid:
High temperatures, dust generation, loss of inhibitor.
Incompatibilities with Other Materials:
Strong oxidizing agents, polymerizing initiators.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization: May occur.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 423-82-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-(N-Ethylperfluorooctanesulfonamido)ethyl acrylate - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION
Other No information available.

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 423-82-5: 2
Canada
CAS# 423-82-5 is listed on Canada's NDSL List.
CAS# 423-82-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 423-82-5 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A
危害码 (欧洲) Xi: Irritant;
风险声明 (欧洲) R36/37/38
安全声明 (欧洲) 26-36/37/39