品牌现货直购
供应商:我要出现这里



查看所有供应商和价格请点击:

8049-11-4生产厂家

8049-11-4价格

8049-11-4

8049-11-4结构式
8049-11-4结构式
  • 常用中文名:第威德合金
  • 常用英文名:devarda's alloy
  • CAS号:8049-11-4
  • 分子式:AlCuZn
  • 分子量:155.936
  • 相关类别: 分析化学 分析试剂 常用分析试剂
  • 发布时间:2018-06-16 09:00:37
  • 更新时间:2024-01-02 19:27:19
  • 1.用作还原剂,可使硝酸原成铵离子用于硝态氮的测定.氯酸根离子还原为氯离子。用于高温、高压的安全装制。


化源商城直购

中文名 德瓦达合金
英文名 aluminum,copper,zinc
中文别名 第威德合金
英文别名 Devarda inverted exclamation mark s alloy
MFCD00198176
Devarda's alloy
密度 4.355
熔点 550 °C(lit.)
分子式 AlCuZn
分子量 155.936
精确质量 153.840286
LogP 0.33250
外观性状 powder | Grey
储存条件 Store at +5°C to +30°C.
稳定性

1.在酸性或碱性溶液中具还原性。

2.本品粉尘吸入或口服有害。

水溶解性 Insoluble in water. Slightly soluble in hydrochloric acid
更多

1. 性状:灰白色颗粒或粉末。

2. 密度(g/mL 25ºC):未确定

3. 相对蒸汽密度(g/mL,空气=1):未确定

4. 熔点(ºC常压):550

5. 沸点(ºC,常压):未确定

6. 沸点(ºC,5.2kPa):未确定

7. 折射率(n20/D):未确定

8. 闪点(ºC,):未确定

9. 比旋光度(º):未确定

10. 自燃点或引燃温度(ºC):未确定

11. 蒸气压(kPa,25ºC):未确定

12. 饱和蒸气压(kPa,60ºC):未确定

13. 燃烧热(KJ/mol):未确定

14. 临界温度(ºC):未确定

15. 临界压力(KPa):未确定

16. 油水(辛醇/水)分配系数的对数值(25℃):未确定

17. 爆炸上限(%,V/V):未确定

18. 爆炸下限(%,V/V):未确定

19. 溶解性(mg/mL) :微溶于盐酸。在酸性或碱性溶液中具还原性。

Name: Devarda s Metal (Alloy) Material Safety Data Sheet
Synonym: Alloy with 50% copper, 45% aluminum, and 5% zinc
CAS: 8049-11-4
Section 1 - Chemical Product MSDS Name:Devarda s Metal (Alloy) Material Safety Data Sheet
Synonym:Alloy with 50% copper, 45% aluminum, and 5% zinc

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
8049-11-4 Devarda's Metal (Alloy) 100 unlisted
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
Causes eye irritation. Aluminum particles may cause corneal necrosis.
Skin:
May cause skin irritation. Prolonged and/or repeated contact may cause irritation and/or dermatitis. May cause skin discoloration.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
May cause liver and kidney damage.
Inhalation:
Dust is irritating to the respiratory tract. Inhalation of fumes may cause metal fume fever, which is characterized by flu-like symptoms with metallic taste, fever, chills, cough, weakness, chest pain, muscle pain and increased white blood cell count.
Chronic:
May cause liver and kidney damage. Chronic inhalation of finely divided powder has been reported to cause pulmonary fibrosis and emphysema. Repeated skin contact has been associated with bleeding into the tissue, delayed hypersensitivity and granulomas.

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Dusts at sufficient concentrations can form explosive mixtures with air. Dust can be an explosion hazard when exposed to heat or flame. Dousing metallic fires with water may generate hydrogen gas, an extremely dangerous explosion hazard.
Extinguishing Media:
Do NOT use water directly on fire. Use dry chemical to fight fire.
Use carbon dioxide.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions. Remove all sources of ignition.

Section 7 - HANDLING and STORAGE
Handling:
Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with skin and eyes. Keep container tightly closed. Keep away from heat, sparks and flame. Avoid ingestion and inhalation.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Keep from contact with oxidizing materials. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Exposure Limits CAS# 8049-11-4: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: grey
Odor: none reported
pH: Not available.
Vapor Pressure: Not applicable.
Viscosity: Not applicable.
Boiling Point: 3092 deg F
Freezing/Melting Point: 550 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: 5.8
Molecular Formula: Not applicable.
Molecular Weight:

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, exposure to air, contact with water, combustible materials.
Incompatibilities with Other Materials:
Aluminum is incompatible with ammonium nitrate, ammonium persulfate, antimony trichloride, arsenic trichloride, barium bromate, barium chlorate, barium iodate, barium sulfate, bismuch trioxide, bromates, bromine, calcium bromate, calcium chlorate, calcium iodate, calcium sulfate, carbon disulfide, carbon tetrachloride, chlorates, chlorinated hydrocarbons, chlorine, chlorine trifluroride, chlorofluorohydrocarbons, chloroform, chromic anhydride, copper oxide, diborane, dichlorodifluoromethane, 1,2-dichloro-1,1,2,2,-tetrafluroethane, ethylene dichloride, propylenedichloride, and orthodichlorobenzene, fluorine, fluorochloro-libricants, iodates, iodine, iodine monochloride, iron oxide, lead oxides, magnesium and potassium perchlorate, magnesium bromate, magnesium chlorate, magnesium iodate, manganese and air, methyl bromide, methyl chloride, monobromotrifluoromethane, monochlorotrifluoro-methane, momofluorotrichloro-methane, niobium oxide and sulfur, nitrate-nitrite and organic matter, nitrates, nitric oxide, nitrogen peroxide, nitrosyl chloride, nitrous oxide, oxygen, palladium, performic acid, phosgene, phosphorus trichloride, potassium bromate, potassium chlorate, potassium iodate, potassium sulfate, propylene dichloride, silicon and lead oxide, silver chloride, sodium bromate, sodium carbide, sodium carbonate, sodium chlorate, sodium hydroxide, sodium iodate, sodium peroxide, sodium peroxide and carbon dioxide, sodium sulfate, sulfate, sulfur dichloride, sulfur dioxide, tetrafluoromethane, trichloroetylene, 1,1,2-trichloro-1,2,2-trifluoroethane, zinc bromate, zinc chlorate, zinc iodate, and zinc peroxide. Copper reacts violently with ammonium nitrate, bromates, iodates, chlorates, ethylene Hazardous Decomposition Products:
Aluminum oxide, toxic fumes of zinc oxide, oxides of copper.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 8049-11-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Devarda's Metal (Alloy) - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 8049-11-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 8049-11-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 8049-11-4 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A
符号 GHS02
GHS02
信号词 Danger
危害声明 H228
警示性声明 P210
个人防护装备 Eyeshields;full-face particle respirator type N100 (US);Gloves;respirator cartridge type N100 (US);type P1 (EN143) respirator filter;type P3 (EN 143) respirator cartridges
危害码 (欧洲) F
风险声明 (欧洲) 11
安全声明 (欧洲) 16-33-7/9
危险品运输编码 UN 3089 4.1/PG 2
WGK德国 3
危险类别 4.1

制法 以铜、铝、锌为原料,以铜∶铝∶锌=10∶9∶1( 质量) 的配比熔融而成。