查看所有供应商和价格请点击：
| 中文名 | 甲苯基氯化膦 |
|---|---|
| 英文名 | [chloro(methyl)phosphoryl]benzene |
| 中文别名 | 甲基苯基磷酰氯 |
| 英文别名 |
methylphenylphosphinous acid chloride
methylphenyl-phosphinic chloride MFCD00013902 methylphenylphosphinic acid chloride Phosphinic chloride,methylphenyl |
| 密度 | 1.26 |
|---|---|
| 沸点 | 154-156ºC (11 torr) |
| 熔点 | 36-38ºC |
| 分子式 | C7H8ClOP |
| 分子量 | 174.56500 |
| 闪点 | 139.1ºC |
| 精确质量 | 174.00000 |
| PSA | 26.88000 |
| LogP | 2.45860 |
| 折射率 | 1.508 |
| 储存条件 | 常温，避光，阴凉干燥处，密封保存 |
| 稳定性 | 常温常压下稳定 |
| 分子结构 | 1、 摩尔折射率：42.95 2、 摩尔体积（m3/mol）：143.9 3、 等张比容（90.2K）：353.9 4、 表面张力（dyne/cm）：36.5 5、 极化率（10 -24cm 3）：17.02 |
| 计算化学 | 1.疏水参数计算参考值（XlogP）:无 2.氢键供体数量:0 3.氢键受体数量:1 4.可旋转化学键数量:1 5.互变异构体数量:无 6.拓扑分子极性表面积17.1 7.重原子数量:10 8.表面电荷:0 9.复杂度:152 10.同位素原子数量:0 11.确定原子立构中心数量:0 12.不确定原子立构中心数量:1 13.确定化学键立构中心数量:0 14.不确定化学键立构中心数量:0 15.共价键单元数量:1 |
| 更多 | 1. 性状：未确定 2. 密度（g/mL,25/4℃）：1.266 3. 相对蒸汽密度（g/mL,空气=1）：未确定 4. 熔点（ºC）：未确定 5. 沸点（ºC,常压）：154-156 6. 沸点（ºC,5.2kPa）：未确定 7. 折射率：未确定 8. 闪点（ºC）：>110 9. 比旋光度（º）：未确定 10. 自燃点或引燃温度（ºC）：未确定 11. 蒸气压（kPa,25ºC）：未确定 12. 饱和蒸气压（kPa,60ºC）：未确定 13. 燃烧热（KJ/mol）：未确定 14. 临界温度（ºC）：未确定 15. 临界压力（KPa）：未确定 16. 油水（辛醇/水）分配系数的对数值：未确定 17. 爆炸上限（%,V/V）：未确定 18. 爆炸下限（%,V/V）：未确定 19. 溶解性：未确定 |
Synonym: SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 34 SECTION 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW Causes burns.Moisture sensitive. Potential Health Effects Eye: Causes eye burns. Skin:
Causes skin burns. Ingestion: Causes gastrointestinal tract burns. Inhalation: Causes chemical burns to the respiratory tract. Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema. May cause burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting. Chronic: Not available. SECTION 4 - FIRST AID MEASURES Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Skin: Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Ingestion: Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Notes to Physician: Treat symptomatically and supportively. SECTION 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam. SECTION 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Avoid runoff into storm sewers and ditches which lead to waterways. SECTION 7 - HANDLING and STORAGE Handling: Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Use only in a chemical fume hood. Storage: Store in a tightly closed container. Store in a dry area. Keep refrigerated. (Store below 4C/39F.) SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 5761-97-7: Personal Protective Equipment Eyes: Not available. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Solid Color: white Odor: Not available. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: 154 - 156 deg C @ 11 mmHg Freezing/Melting Point: 20 deg C Autoignition Temperature: Not available. Flash Point: > 110 deg C (> 230.00 deg F) Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: Specific Gravity/Density: 1.266 Molecular Formula: C7H8ClOP Molecular Weight: 174.57 SECTION 10 - STABILITY AND REACTIVITY Chemical Stability: Stable under normal temperatures and pressures. Conditions to Avoid: Exposure to moist air or water. Incompatibilities with Other Materials: Strong oxidizing agents, strong bases. Hazardous Decomposition Products: Hydrogen chloride, carbon monoxide, oxides of phosphorus, carbon dioxide, phosphoric acid. Hazardous Polymerization: Has not been reported SECTION 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 5761-97-7 unlisted. LD50/LC50: Not available. Carcinogenicity: Methylphenylphosphinic chloride - Not listed by ACGIH, IARC, or NTP. SECTION 12 - ECOLOGICAL INFORMATION Other No information available. SECTION 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. SECTION 14 - TRANSPORT INFORMATION IATA Shipping Name: CORROSIVE SOLID, N.O.S. Hazard Class: 8 UN Number: 1759 Packing Group: II IMO Shipping Name: CORROSIVE SOLID, N.O.S. Hazard Class: 8 UN Number: 1759 Packing Group: II RID/ADR Not regulated as a hazardous material. SECTION 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: C Risk Phrases: R 34 Causes burns. Safety Phrases: S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). WGK (Water Danger/Protection) CAS# 5761-97-7: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 5761-97-7 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 5761-97-7 is not listed on the TSCA inventory. It is for research and development use only. SECTION 16 - ADDITIONAL INFORMATION MSDS Creation Date: 1/16/2002 Revision #1 Date: 10/05/2004 The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no way shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if the company has been advised of the possibility of such damages. SECTION 16 - ADDITIONAL INFORMATION N/A |
|
生态学数据: 通常对水是不危害的，若无政府许可，勿将材料排入周围环境
|
| 危害码 (欧洲) | C:Corrosive; |
|---|---|
| 风险声明 (欧洲) | R34 |
| 安全声明 (欧洲) | S26-S36/37/39-S45 |
| 危险品运输编码 | UN 1760 |
| 包装等级 | II |
![[methyl(phenyl)phosphoryl]oxybenzene结构式](https://www.chemsrc.com/caspic/379/14365-34-5.png)
![1-[4-[methyl(phenyl)phosphoryl]oxyphenyl]ethanone结构式](https://www.chemsrc.com/caspic/009/118201-61-9.png)