查看所有供应商和价格请点击：
| 中文名 | 碲化锑 |
|---|---|
| 英文名 | Antimony(III) telluride |
| 英文别名 |
Antimony sesquitelluride,Antimony telluride,Diantimony tritelluride
tellanylideneantimony,tellurium MFCD00016320 EINECS 215-480-9 |
| 密度 | 6.5 g/mL at 25 °C(lit.) |
|---|---|
| 熔点 | 629ºC |
| 分子式 | H2Sb2Te3 |
| 分子量 | 628.33600 |
| 精确质量 | 633.54200 |
| 外观性状 | 灰色固体 |
| 储存条件 | 保持贮藏器密封、储存在阴凉、干燥的地方，确保工作间有良好的通风或排气装置 |
| 稳定性 | 如果遵照规格使用和储存则不会分解，未有已知危险反应，避免酸 |
| 分子结构 | 1、摩尔折射率：无可用的 2、摩尔体积（cm3/mol）：无可用的 3、等张比容（90.2K）：无可用的 4、表面张力（dyne/cm）：无可用的 5、介电常数：无可用的 6、极化率（10-24cm3）：无可用的 7、单一同位素质量：631.526313 Da 8、标称质量：632 Da 9、平均质量：626.32 Da |
| 计算化学 | 1.疏水参数计算参考值（XlogP）:无 2.氢键供体数量:0 3.氢键受体数量:0 4.可旋转化学键数量:0 5.互变异构体数量:无 6.拓扑分子极性表面积0 7.重原子数量:5 8.表面电荷:0 9.复杂度:6.9 10.同位素原子数量:0 11.确定原子立构中心数量:0 12.不确定原子立构中心数量:0 13.确定化学键立构中心数量:0 14.不确定化学键立构中心数量:0 15.共价键单元数量:3 |
| 更多 | 1. 性状：灰色块状。 2. 密度（g/mL,25/4℃）： 6.5 3. 相对蒸汽密度（g/mL,空气=1）：未确定 4. 熔点（ºC）：629 5. 沸点（ºC,常压）：未确定 6. 沸点（ºC,5.2kPa）： 未确定 7. 折射率： 未确定 8. 闪点（ºC）： 未确定 9. 比旋光度（º）： 未确定 10. 自燃点或引燃温度（ºC）： 未确定 11. 蒸气压（kPa,25ºC）： 未确定 12. 饱和蒸气压（kPa,60ºC）： 未确定 13. 燃烧热（KJ/mol）：未确定 14. 临界温度（ºC）： 未确定 15. 临界压力（KPa）： 未确定 16. 油水（辛醇/水）分配系数的对数值： 未确定 17. 爆炸上限（%,V/V）：未确定 18. 爆炸下限（%,V/V）： 未确定 19. 溶解性：不溶于水。 |
|
SECTION 1: Identification of the substance/mixture and of the company/undertaking Product identifiers Product name: Antimony(III) telluride REACH No.: A registration number is not available for this substance as the substance or its uses are exempted from registration, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline.
CAS-No.: 1327-50-0 Relevant identified uses of the substance or mixture and uses advised against Identified uses: Laboratory chemicals, Manufacture of substances SECTION 2: Hazards identification Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 Acute toxicity, Inhalation (Category 4), H332 Acute toxicity, Oral (Category 4), H302 Chronic aquatic toxicity (Category 2), H411 For the full text of the H-Statements mentioned in this Section, see Section 16. Classification according to EU Directives 67/548/EEC or 1999/45/EC Xn HarmfulR20/22 N Dangerous for theR51/53 environment For the full text of the R-phrases mentioned in this Section, see Section 16. Label elements Labelling according Regulation (EC) No 1272/2008 Pictogram Signal wordWarning Hazard statement(s) H302Harmful if swallowed. H332Harmful if inhaled. H411Toxic to aquatic life with long lasting effects. Precautionary statement(s) P273Avoid release to the environment. Supplemental Hazardnone Statements Other hazards - none SECTION 3: Composition/information on ingredients Substances Formula: Sb2Te3 Molecular Weight: 626,32 g/mol CAS-No.: 1327-50-0 Hazardous ingredients according to Regulation (EC) No 1272/2008 ComponentClassificationConcentration ANTIMONY TELLURIDE, POWDER, -325 MESH Acute Tox. 4; Aquatic Chronic - 2; H302, H332, H411 Hazardous ingredients according to Directive 1999/45/EC ComponentClassificationConcentration ANTIMONY TELLURIDE, POWDER, -325 MESH Xn, N, R20/22 - R51/53- For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16 SECTION 4: First aid measures Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician. In case of eye contact Flush eyes with water as a precaution. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 Indication of any immediate medical attention and special treatment needed no data available SECTION 5: Firefighting measures Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Special hazards arising from the substance or mixture Tellurium oxides, Antimony oxide Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. Further information no data available SECTION 6: Accidental release measures Personal precautions, protective equipment and emergency procedures Wear respiratory protection. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8. Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Methods and materials for containment and cleaning up Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal. Reference to other sections For disposal see section 13. SECTION 7: Handling and storage Precautions for safe handling Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2. Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Specific end use(s) A part from the uses mentioned in section 1.2 no other specific uses are stipulated SECTION 8: Exposure controls/personal protection Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product. Personal protective equipment Eye/face protection Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Body Protection Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N99 (US) or type P2 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Control of environmental exposure Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. SECTION 9: Physical and chemical properties Information on basic physical and chemical properties a) AppearanceForm: solid b) Odourno data available c) Odour Thresholdno data available d) pHno data available e) Melting point/freezing629 °C point f) Initial boiling point and no data available boiling range g) Flash pointno data available h) Evapouration rateno data available i) Flammability (solid, gas) no data available j) Upper/lowerno data available flammability or explosive limits k) Vapour pressureno data available l) Vapour densityno data available m) Relative densityno data available n) Water solubilityno data available o) Partition coefficient: n- no data available octanol/water p) Auto-ignitionno data available temperature q) Decompositionno data available temperature r) Viscosityno data available s) Explosive propertiesno data available t) Oxidizing propertiesno data available Other safety information no data available SECTION 10: Stability and reactivity Reactivity no data available Chemical stability Stable under recommended storage conditions. Possibility of hazardous reactions no data available Conditions to avoid no data available Incompatible materials Acids, Strong oxidizing agents, Chlorates, Perchlorates. Hazardous decomposition products Other decomposition products - no data available In the event of fire: see section 5 SECTION 11: Toxicological information Information on toxicological effects Acute toxicity no data available Inhalation: no data available Skin corrosion/irritation no data available Serious eye damage/eye irritation no data available Respiratory or skin sensitisation no data available Germ cell mutagenicity no data available Carcinogenicity no data available IARC:No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity no data available Specific target organ toxicity - single exposure no data available Specific target organ toxicity - repeated exposure no data available Aspiration hazard no data available Additional Information RTECS: Not available Headache, Nausea, Drowsiness, metallic taste, loss of appetite, Tremors, Convulsions, respiratory distress SECTION 12: Ecological information Toxicity no data available Persistence and degradability no data available Bioaccumulative potential no data available Mobility in soil no data available Results of PBT and vPvB assessment PBT/vPvB assessment not available as chemical safety assessment not required/not conducted Other adverse effects Very toxic to aquatic life. SECTION 13: Disposal considerations Waste treatment methods Product Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Contaminated packaging Dispose of as unused product. SECTION 14: Transport information UN number ADR/RID: 1549IMDG: 1549IATA: 1549 UN proper shipping name ADR/RID: ANTIMONY COMPOUND, INORGANIC, SOLID, N.O.S. (ANTIMONY TELLURIDE, POWDER, -325 MESH) IMDG: ANTIMONY COMPOUND, INORGANIC, SOLID, N.O.S. (ANTIMONY TELLURIDE, POWDER, -325 MESH) IATA:Antimony compound, inorganic, solid, n.o.s. (ANTIMONY TELLURIDE, POWDER, -325 MESH) Transport hazard class(es) ADR/RID: 6.1IMDG: 6.1IATA: 6.1 Packaging group ADR/RID: IIIIMDG: IIIIATA: III Environmental hazards ADR/RID: yesIMDG Marine pollutant: yesIATA: no Special precautions for user no data available SECTION 15 - REGULATORY INFORMATION N/A SECTION 16 - ADDITIONAL INFORMATION N/A |
|
生态学数据: 对是水稍微有危害的不要让未稀释或大量的产品接触地下水、水道或者污水系统，若无政府许可，勿将材料排入周围环境
|
| 符号 |
GHS07, GHS09 |
|---|---|
| 信号词 | Warning |
| 危害声明 | H302 + H332-H410 |
| 警示性声明 | P261-P273-P301 + P312 + P330-P304 + P340 + P312-P391-P501 |
| 危害码 (欧洲) | Xn,N |
| 风险声明 (欧洲) | R20/22 |
| 安全声明 (欧洲) | S61 |
| 危险品运输编码 | UN 1549 6.1/PG 3 |
| WGK德国 | 2 |
| 包装等级 | III |
| 危险类别 | 6.1(b) |