品牌现货直购
供应商:我要出现这里

查看所有供应商和价格请点击:

1313-85-5生产厂家

1313-85-5价格

1313-85-5

1313-85-5结构式
1313-85-5结构式

化源商城直购

中文名 硒化钠
英文名 sodium selenide
英文别名 EINECS 215-212-0
MFCD00014240
Sodium Selenide
密度 2.625
熔点 >875ºC
分子式 Na2Se
分子量 124.94000
精确质量 125.89600
储存条件

保持贮藏器密封、储存在阴凉、干燥的地方,确保工作间有良好的通风或排气装置

稳定性 如果遵照规格使用和储存则不会分解,未有已知危险反应,避免氧化物、水分/潮湿、酸. 易溶于水,通入空气即有硒析出,在潮湿空气中由于析出硒并生成多硒化物而变红。
分子结构

1、摩尔折射率:无可用的

2、摩尔体积(cm3/mol):无可用的

3、等张比容(90.2K):无可用的

4、表面张力(dyne/cm):无可用的

5、介电常数:无可用的

6、极化率(10-24cm3):无可用的

7、单一同位素质量:125.896062 Da

8、标称质量:126 Da

9、平均质量:124.9395 Da

计算化学

1.疏水参数计算参考值(XlogP):无

2.氢键供体数量:0

3.氢键受体数量:1

4.可旋转化学键数量:0

5.互变异构体数量:无

6.拓扑分子极性表面积0

7.重原子数量:3

8.表面电荷:0

9.复杂度:0

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:3

更多

1. 性状:白色晶体,无气味

2. 密度(g/cm3,25℃):2.58

3. 相对蒸汽密度(g/mL,空气=1):未确定

4. 熔点(ºC):>875

5. 沸点(ºC,常压):未确定

6. 沸点(ºC,0.05mmHg):未确定

7. 折射率(n20/D):未确定

8. 闪点(ºC):未确定

9. 比旋光度(º):未确定

10. 自燃点或引燃温度(ºC):未确定

11. 蒸气压(mmHg,25ºC):未确定

12. 饱和蒸气压(kPa,60ºC):未确定

13. 燃烧热(KJ/mol):未确定

14. 临界温度(ºC):未确定

15. 临界压力(KPa):未确定

16. 油水(辛醇/水)分配系数的对数值:未确定

17. 爆炸上限(%,V/V):未确定

18. 爆炸下限(%,V/V):未确定

19. 溶解性:溶于水


SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name: Sodium selenide
REACH No.: A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No.: 1313-85-5
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 3), H301
Acute toxicity, Inhalation (Category 3), H331
Specific target organ toxicity - repeated exposure (Category 2), H373
Acute aquatic toxicity (Category 1), H400
Chronic aquatic toxicity (Category 1), H410
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
T ToxicR23/25
R33
N Dangerous for theR50/53
environment
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal wordDanger
Hazard statement(s)
H301 + H331Toxic if swallowed or if inhaled
H373May cause damage to organs through prolonged or repeated exposure.
H410Very toxic to aquatic life with long lasting effects.
Precautionary statement(s)
P261Avoid breathing dust.
P273Avoid release to the environment.
P301 + P310IF SWALLOWED: Immediately call a POISON CENTER or doctor/
physician.
P311Call a POISON CENTER or doctor/ physician.
P501Dispose of contents/ container to an approved waste disposal plant.
Supplemental Hazardnone
Statements
Other hazards - none

SECTION 3: Composition/information on ingredients
Substances
Synonyms: disodium selenide
Formula: Na2Se
Molecular Weight: 124,94 g/mol
CAS-No.: 1313-85-5
EC-No.: 215-212-0
Hazardous ingredients according to Regulation (EC) No 1272/2008
ComponentClassificationConcentration
Sodium selenide
CAS-No.1313-85-5Acute Tox. 3; STOT RE 2;<= 100 %
EC-No.215-212-0Aquatic Acute 1; Aquatic
Index-No.034-002-00-8Chronic 1; H301 + H331,
H373, H410
Hazardous ingredients according to Directive 1999/45/EC
ComponentClassificationConcentration
Sodium selenide
CAS-No.1313-85-5T, N, R23/25 - R33 - R50/53<= 100 %
EC-No.215-212-0
Index-No.034-002-00-8
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
no data available
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Wear respiratory protection. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling
the product.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such
as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into
the environment must be avoided.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) AppearanceForm: solid
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingno data available
point
f) Initial boiling point and no data available
boiling range
g) Flash pointno data available
h) Evapouration rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative density2,625 g/cm3 at 20 °C
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Water, Acids, Oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
LD50 Oral - rat - 13,19 mg/kg
LD50 Oral - mouse - 7,079 mg/kg
LD50 Oral - rabbit - 2,25 mg/kg
LD50 Oral - guinea pig - 5,06 mg/kg
LD50 Intraperitoneal - mouse - 4 mg/kg
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:3 - Group 3: Not classifiable as to its carcinogenicity to humans (Sodium selenide)
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
May cause damage to organs through prolonged or repeated exposure.
Aspiration hazard
no data available
Additional Information
RTECS: WE0350000
anemia, Vomiting, Diarrhoea, Cough, Difficulty in breathing, Acute selenium poisoning produces central
nervous system effects, which include nervousness, convulsions, and drowsiness. Other signs of
intoxication can include skin eruptions, lassitude, gastrointestinal distress, teeth that are discolored or
decayed, odorous ("garlic") breath, and partial loss of hair and nails. Chronic exposure by inhalation can
produce symptoms that include pallor, coating of the tongue, anemia, irritation of the mucosa, lumbar pain,
liver and spleen damage, as well as any of the other previously mentioned symptoms. Chronic contact with
selenium compounds may cause garlic odor of breath and sweat, dermatitis, and moderate emotional
instability., Dermatitis, garlic-like breath odor, pallor, nervousness, depression

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
Toxic to aquatic life with long lasting effects.

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: 3283IMDG: 3283IATA: 3283
UN proper shipping name
ADR/RID: SELENIUM COMPOUND, SOLID, N.O.S. (Sodium selenide)
IMDG: SELENIUM COMPOUND, SOLID, N.O.S. (Sodium selenide)
IATA:Selenium compound, solid, n.o.s. (Sodium selenide)
Transport hazard class(es)
ADR/RID: 6.1IMDG: 6.1IATA: 6.1
Packaging group
ADR/RID: IIIMDG: IIIATA: II
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out

SECTION 16: Other information
Full text of H-Statements referred to under sections 2 and 3.
Acute Tox.Acute toxicity
Aquatic AcuteAcute aquatic toxicity
Aquatic ChronicChronic aquatic toxicity
H301Toxic if swallowed.
H301 + H331Toxic if swallowed or if inhaled
H331Toxic if inhaled.
H373May cause damage to organs through prolonged or repeated exposure.
H400Very toxic to aquatic life.
Full text of R-phrases referred to under sections 2 and 3
NDangerous for the environment
TToxic
R23/25Toxic by inhalation and if swallowed.
R33Danger of cumulative effects.
R50/53Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
Further information
Copyright 2013 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

毒理学数据:

致畸性: 大鼠肝脏DNA损坏测试:50umol/L

生态学数据:

对水是极其危害的,即使是少量产品渗入地下也会对饮用水造成危害,若无政府许可勿将产品排入周围环境。对水中有机物有危害

CHEMICAL IDENTIFICATION

RTECS NUMBER :
WE0350000
CHEMICAL NAME :
Sodium selenide
CAS REGISTRY NUMBER :
1313-85-5
LAST UPDATED :
199712
DATA ITEMS CITED :
11
MOLECULAR FORMULA :
Na2-Se
MOLECULAR WEIGHT :
124.94
WISWESSER LINE NOTATION :
NA2 SE

HEALTH HAZARD DATA

ACUTE TOXICITY DATA

TYPE OF TEST :
LD50 - Lethal dose, 50 percent kill
ROUTE OF EXPOSURE :
Intraperitoneal
SPECIES OBSERVED :
Rodent - mouse
DOSE/DURATION :
4 mg/kg
TOXIC EFFECTS :
Details of toxic effects not reported other than lethal dose value

MUTATION DATA

TYPE OF TEST :
Sister chromatid exchange
TEST SYSTEM :
Rodent - hamster Lung
DOSE/DURATION :
2 mg/L
REFERENCE :
CALEDQ Cancer Letters (Shannon, Ireland). (Elsevier Scientific Pub. Ireland Ltd., POB 85, Limerick, Ireland) V.1- 1975- Volume(issue)/page/year: 18,109,1983 *** REVIEWS *** ACGIH TLV-TWA 0.2 mg(Se)/m3 DTLVS* The Threshold Limit Values (TLVs) and Biological Exposure Indices (BEIs) booklet issues by American Conference of Governmental Industrial Hygienists (ACGIH), Cincinnati, OH, 1996 Volume(issue)/page/year: TLV/BEI,1997 TOXICOLOGY REVIEW CHREAY Chemical Reviews. (American Chemical Soc., Distribution Office Dept. 223, POB 57136, West End Stn., Washington, DC 20037) V.1- 1924- Volume(issue)/page/year: 28,179,1941 *** U.S. STANDARDS AND REGULATIONS *** MSHA STANDARD-air:TWA 0.2 mg(Se)/m3 DTLVS* The Threshold Limit Values (TLVs) and Biological Exposure Indices (BEIs) booklet issues by American Conference of Governmental Industrial Hygienists (ACGIH), Cincinnati, OH, 1996 Volume(issue)/page/year: 3,224,1971 OSHA PEL (Gen Indu):8H TWA 0.2 mg(Se)/m3 CFRGBR Code of Federal Regulations. (U.S. Government Printing Office, Supt. of Documents, Washington, DC 20402) Volume(issue)/page/year: 29,1910.1000,1994 OSHA PEL (Construc):8H TWA 0.2 mg(Se)/m3 CFRGBR Code of Federal Regulations. (U.S. Government Printing Office, Supt. of Documents, Washington, DC 20402) Volume(issue)/page/year: 29,1926.55,1994 OSHA PEL (Shipyard):8H TWA 0.2 mg(Se)/m3 CFRGBR Code of Federal Regulations. (U.S. Government Printing Office, Supt. of Documents, Washington, DC 20402) Volume(issue)/page/year: 29,1915.1000,1993 OSHA PEL (Fed Cont):8H TWA 0.2 mg(Se)/m3 CFRGBR Code of Federal Regulations. (U.S. Government Printing Office, Supt. of Documents, Washington, DC 20402) Volume(issue)/page/year: 41,50-204.50,1994

危害码 (欧洲) T,N
风险声明 (欧洲) 23/25-33-50/53
安全声明 (欧洲) 20/21-28-45-60-61
危险品运输编码 UN3134
包装等级 II
危险类别 4.3
上游产品  2

下游产品  0

硒化钠是由硒经雕白粉(CH 2O·NaHSO 2·2H 2O)还原而得。 金属钠与硒在液态氨中进行反应可制得硒化钠。操作方法也按照该节所述的一切细节来操作。制得的Na2Se是分析纯的。 如下图I-12 氢化钠制造装置: 1313-85-5 preparation

1—氢气瓶;2—钛制塔;3—储气器;4—流速计;

5—玻璃管;6—温度计;7—铁箱;8—热电偶;

9—三通旋塞;10—接缝;11—油封;

12—橡胶塞;13—电动机;14—搅拌器;

15—胶管;16—鼓泡器管;17—冷却管;

18—橡胶塞;19—派热克斯烧瓶;

20—矿物油鼓泡器;21—反应烧瓶加热器;

22—变压器及100V交流电源