Bis(tetramethylcyclopentadienyl)zirconium dichloride

Modify Date: 2024-01-13 12:57:28

Bis(tetramethylcyclopentadienyl)zirconium dichloride Structure
Bis(tetramethylcyclopentadienyl)zirconium dichloride structure
Common Name Bis(tetramethylcyclopentadienyl)zirconium dichloride
CAS Number 119445-90-8 Molecular Weight 404.52900
Density N/A Boiling Point N/A
Molecular Formula C18H26Cl2Zr Melting Point N/A
MSDS N/A Flash Point N/A

 Names

Name 1,2,3,5-tetramethylcyclopenta-1,3-diene,zirconium(4+),dichloride
Synonym More Synonyms

 Chemical & Physical Properties

Molecular Formula C18H26Cl2Zr
Molecular Weight 404.52900
Exact Mass 402.04600
LogP 6.54280

 MSDS


Section 1: Product Identification
Chemical Name:Bis(tetramethylcyclopentadienyl)zirconium dichloride, min. 97%
CAS Registry Number:119445-90-8
Formula:[(CH3)4C5H]2ZrCl2
EINECS Number:none
Chemical Family:metallocene
Synonym:Zirconium, bis[1,2,3,4,5-.ete.)-1,2,3,4-tetramethyl-2,4-cyclopentadiene-1-yl]dichloro

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title compound119445-90-8100%5mg/m3 (as Zr)5mg/m3 (as Zr)

Section 3: Hazards Identification
Emergency Overview:Irritating to skin and eyes. May be irritating to respiratory tract.
Primary Routes of Exposure:skin, eyes, ingestion
Eye Contact:Causes moderate irritation of the eyes.
Skin Contact:Causes moderate irritation of the eyes.
Inhalation:May be irritating to the nose, mucous membranes and respiratory tract.
Ingestion:No information on the physiological effects of ingestion.
Exposure to moisture slowly produces hydrochloric acid. Irritating to skin, eyes. May be irritating to the
Acute Health Affects:
respiratory tract.
Chronic Health Affects:No information available on long-term chronic effects.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in
Inhalation:
breathing, coughing, wheezing or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:none
Autoignition Temperature:none
Explosion Limits:none
Extinguishing Medium:carbon dioxide, foam or dry powder
If this product is involved in a fire, firefighters should be equipped with NIOSH approved positive pressure
Special Fire Fighting Procedures:
self-contained breathing apparatus.
Hazardous Combustion andIf involved in a fire this material may emit toxic organic fumes.
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
Small spills can be mixed with calcium carbonate, sodium bicarbonate or other appropriate acid neutralizing
Spill and Leak Procedures:
non combustible solid and swept up.
hr class='msds_hr'/> SECTION 7: Handling and Storage
The material will degrade on prolonged exposure to moisture. Keep bottle tightly sealed and away from heat
Handling and Storage:
and light. Handle in a dry atmosphere.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear protective clothing and gloves.
Ventilation:If possible, handle the material in an efficient fume hood.
If ventilation is not available a respirator should be worn. The use of respirators requires a Respiratory
Respirator:
Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:If possible, handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:off-white powder
Molecular Weight:404.53
Melting Point:no data
Boiling Point:no data
Vapor Pressure:no data
Specific Gravity:no data
Odor:may have an acidic odor
Solubility in Water:reacts with water

SECTION 10: Stability and Reactivity
Stability:moisture-sensitive solid
Hazardous Polymerization:No hazardous polymerization.
Conditions to Avoid:exposure to moisture
Incompatibility:water, strong oxidizing agents
Decomposition Products:carbon dioxide, carbon monoxide, hydrogen chloride, organic fumes and zirconium oxide

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:no data
Mutagenic Effects:no data
Tetratogenic Effects:no data

SECTION 12: Ecological Information
Ecological Information:No information available

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA

SECTION 15: Regulatory Information
TSCA:Not listed in the TSCA inventory.
SARA (Title 313):Title compound not listed
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Safety Phrases S24/25

 Synonyms

1,3-Cyclopentadiene,1,2,3,4-tetramethyl-,zirconium complex
Top Suppliers:I want be here

No recommended suppliers.

Hot Compounds More...
Dichloromethane
CAS#:75-09-2
Polyacrylic acid
CAS#:9003-01-4
sodium carbonate
CAS#:497-19-8
Silicon dioxide
CAS#:7631-86-9
Triethanolamine
CAS#:102-71-6
Demeton
CAS#:126-75-0
Water
CAS#:7732-18-5
4-(4-Piperidinyl)morpholine dihydrochloride
CAS#:53617-35-9
Diclofenac sodium
CAS#:15307-79-6
Budesonide
CAS#:51372-29-3