ABS Resins

Modify Date: 2024-01-02 13:00:39

ABS Resins Structure
ABS Resins structure
Common Name ABS Resins
CAS Number 9003-56-9 Molecular Weight 211.30200
Density 1.05 g/mL at 25ºC Boiling Point 145.2ºC at 760 mmHg
Molecular Formula (C8H8.C4H6.C3H3N)x Melting Point 58.54(±0.5)ºC
MSDS N/A Flash Point N/A

 Names

Name ABS Resins
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.05 g/mL at 25ºC
Boiling Point 145.2ºC at 760 mmHg
Melting Point 58.54(±0.5)ºC
Molecular Formula (C8H8.C4H6.C3H3N)x
Molecular Weight 211.30200
Exact Mass 211.13600
PSA 23.79000
LogP 4.38398
Water Solubility acetone, MEK and DMF: soluble

 MSDS

Name: Poly(acrylonitrile-co-butadiene-co-styrene) Material Safety Data Sheet
Synonym: 2-Propenitrile, polymer with 1,3-butadiene and ethenylbenzene
CAS: 9003-56-9
Section 1 - Chemical Product MSDS Name:Poly(acrylonitrile-co-butadiene-co-styrene) Material Safety Data Sheet
Synonym:2-Propenitrile, polymer with 1,3-butadiene and ethenylbenzene

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
9003-56-9 Poly(acrylonitrile-butadiene-styrene) 100 unlisted
Hazard Symbols: T
Risk Phrases: 20/21/22 45

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed. May cause cancer.
Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid immediately. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Forms smooth, slippery surfaces on floors, posing an accident risk.
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 9003-56-9: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: C15H17N1x
Molecular Weight: 197.119

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 9003-56-9: AT6970000 LD50/LC50:
Not available.
Carcinogenicity:
Poly(acrylonitrile-butadiene-styrene) - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 45 May cause cancer.
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 53 Avoid exposure - obtain special instructions
before use.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 9003-56-9: No information available.
Canada
CAS# 9003-56-9 is listed on Canada's DSL List.
CAS# 9003-56-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 9003-56-9 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Toxicological Information

CHEMICAL IDENTIFICATION

RTECS NUMBER :
AT6970000
CHEMICAL NAME :
Acrylonitrile, polymer with 1,3-butadiene and styrene
CAS REGISTRY NUMBER :
9003-56-9
LAST UPDATED :
199710
DATA ITEMS CITED :
7

 Safety Information

Hazard Codes Xn
Risk Phrases R20/21/22;R36/37/38
Safety Phrases S36-S26
RIDADR NONH for all modes of transport
WGK Germany 3
RTECS AT6970000

 Synonyms

abscopolymer
NITRILERUBBERCOPOLYMERS
ABSPOLYMERS
abs
KRYLENE
ABSPOLYMER
MFCD00133993
absresin
absresins
ABS rod
Transparent ABS
Top Suppliers:I want be here

Get all suppliers and price by the below link:

ABS Resins suppliers

ABS Resins price