4-(4-Biphenylyl)-2-methyl-1,3-thiazole

Modify Date: 2024-01-08 17:42:04

4-(4-Biphenylyl)-2-methyl-1,3-thiazole Structure
4-(4-Biphenylyl)-2-methyl-1,3-thiazole structure
Common Name 4-(4-Biphenylyl)-2-methyl-1,3-thiazole
CAS Number 24864-19-5 Molecular Weight 251.34600
Density 1.147g/cm3 Boiling Point 431.3ºC at 760mmHg
Molecular Formula C16H13NS Melting Point 113-118ºC
MSDS N/A Flash Point 218.3ºC

 Names

Name 2-methyl-4-(4-phenylphenyl)-1,3-thiazole
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.147g/cm3
Boiling Point 431.3ºC at 760mmHg
Melting Point 113-118ºC
Molecular Formula C16H13NS
Molecular Weight 251.34600
Flash Point 218.3ºC
Exact Mass 251.07700
PSA 41.13000
LogP 4.78550
Vapour Pressure 3.05E-07mmHg at 25°C
Index of Refraction 1.618

 MSDS

Name: 4-(4-Biphenylyl)-2-Methylthiazole 97% Material Safety Data Sheet
Synonym: None
CAS: 24864-19-5
Section 1 - Chemical Product MSDS Name:4-(4-Biphenylyl)-2-Methylthiazole 97% Material Safety Data Sheet
Synonym:None

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
24864-19-5 4-(4-Biphenylyl)-2-Methylthiazole 97 246-505-1
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 24864-19-5: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 112.00 - 115.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C16H13NS
Molecular Weight: 251.35

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 24864-19-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-(4-Biphenylyl)-2-Methylthiazole - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 24864-19-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 24864-19-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 24864-19-5 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Safety Phrases S24/25
HS Code 2934100090

 Synthetic Route

~95%

4-(4-Biphenylyl)-2-methyl-1,3-thiazole Structure

4-(4-Biphenylyl...

CAS#:24864-19-5

Literature: Dawood, Kamal M.; El-Deftar, Moteaa M. Synthesis, 2010 , # 6 art. no. Z23909SS, p. 1030 - 1038

~82%

4-(4-Biphenylyl)-2-methyl-1,3-thiazole Structure

4-(4-Biphenylyl...

CAS#:24864-19-5

Literature: Dawood, Kamal M.; El-Deftar, Moteaa M. Synthesis, 2010 , # 6 art. no. Z23909SS, p. 1030 - 1038

~%

4-(4-Biphenylyl)-2-methyl-1,3-thiazole Structure

4-(4-Biphenylyl...

CAS#:24864-19-5

Literature: Ukrainskii Khimicheskii Zhurnal (Russian Edition), , vol. 22, p. 80,82 Chem.Abstr., , p. 16751

 Customs

HS Code 2934100090
Summary 2934100090 other compounds containing an unfused thiazole ring (whether or not hydrogenated) in the structure VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:20.0%

 Synonyms

4-(4-Biphenylyl)-2-methylthiazole
4-Biphenyl-4-yl-2-methyl-thiazol
4-(4-Biphenylyl)-2-methyl-1,3-thiazole
4-biphenyl-4-yl-2-methyl-thiazole
4-(biphenyl-4-yl)-2-methyl-1,3-thiazole
Thiazole,4-(4-biphenylyl)-2-methyl
2-Methyl-4-p-biphenylyl-thiazol
EINECS 246-505-1
MFCD00005333