(s)-3,3,3-trifluoro-2-hydroxy-2-methylpropionic acid

Modify Date: 2024-01-12 15:21:42

(s)-3,3,3-trifluoro-2-hydroxy-2-methylpropionic acid Structure
(s)-3,3,3-trifluoro-2-hydroxy-2-methylpropionic acid structure
Common Name (s)-3,3,3-trifluoro-2-hydroxy-2-methylpropionic acid
CAS Number 24435-45-8 Molecular Weight 158.07600
Density 1.407g/cm3 Boiling Point 60-64ºC 20mm
Molecular Formula C4H5F3O3 Melting Point 110ºC
MSDS USA Flash Point 59.9ºC

 Names

Name (2S)-3,3,3-trifluoro-2-hydroxy-2-methylpropanoic acid
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.407g/cm3
Boiling Point 60-64ºC 20mm
Melting Point 110ºC
Molecular Formula C4H5F3O3
Molecular Weight 158.07600
Flash Point 59.9ºC
Exact Mass 158.01900
PSA 57.53000
LogP 0.38430
Vapour Pressure 0.0042mmHg at 25°C
Index of Refraction -16.5 ° (C=5, H2O)
Storage condition Refrigerator

 MSDS

(S)-3,3,3-Trifluoro-2-hydroxy-2-methylpropionic Acid Revision number: 5
SAFETY DATA SHEET

Section1. IDENTIFICATION
Product name:(S)-3,3,3-Trifluoro-2-hydroxy-2-methylpropionic Acid

Revision number:5

Section2. HAZARDS IDENTIFICATION
GHS classification
PHYSICAL HAZARDS
Category 1
Corrosive to metals
HEALTH HAZARDS
Category 1C
Skin corrosion/irritation
Serious eye damage/eye irritationCategory 1
Not classified
ENVIRONMENTAL HAZARDS
GHS label elements, including precautionary statements
Pictograms or hazard symbols
Signal wordDanger
Hazard statementsMay be corrosive to metals
Causes severe skin burns and eye damage
Precautionary statements:
[Prevention]Keep only in original container.
Do not breathe dust/fume/gas/mist/vapours/spray.
Wash hands thoroughly after handling.
Wear protective gloves/eye protection/face protection.
[Response]IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
skin with water/shower.
Wash contaminated clothing before reuse.
Immediately call a POISON CENTER or doctor/physician.
Absorb spillage to prevent material damage.
[Storage]Store locked up.
[Disposal]Dispose of contents/container through a waste management company authorized by
the local government.
Acid

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:Substance
Components:(S)-3,3,3-Trifluoro-2-hydroxy-2-methylpropionic Acid
Percent:>98.0%(T)
CAS Number:24435-45-8
Synonyms:(S)-2-Hydroxy-2-(trifluoromethyl)propionic Acid , (S)-3,3,3-Trifluoro-2-
hydroxyisobutyric Acid
Chemical Formula:C4H5F3O3

Section4. FIRST AID MEASURES
Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Immediately call a POISON CENTER or doctor/physician.
Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. Immediately call a POISON CENTER or doctor/physician.
Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.Immediately call a POISON CENTER or
doctor/physician.
Ingestion:Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT
induce vomiting.
Protection of first-aiders:A rescuer should wear personal protective equipment, such as rubber gloves and air-
tight goggles.

Section5. FIRE-FIGHTING MEASURES
Suitable extinguishingDry chemical, foam, water spray, carbon dioxide.
media:
Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to
from the chemical:generate poisonous fume.
Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
When extinguishing fire, be sure to wear personal protective equipment.
Special protective
equipment for firefighters:

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions,Use extra personal protective equipment (P3 filter respirator for toxic particles). Keep
protective equipment and people away from and upwind of spill/leak. Entry to non-involved personnel should
emergency procedures: be controlled around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it.
containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with
up: appropriate laws and regulations.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent dispersion of dust. Wash hands and face thoroughly after handling.
Use a closed system if possible. Use a local exhaust if dust or aerosol will be
generated.
Advice on safe handling:Avoid contact with skin, eyes and clothing.
Use corrosive resistant equipment.
Conditions for safe storage, including any
incompatibilities
Storage conditions:Keep container tightly closed. Store in a refrigerator.
Store locked up.
Store away from incompatible materials such as oxidizing agents.
Acid

Section7. HANDLING AND STORAGE
Heat-sensitive
Packaging material:Comply with laws. Keep only in original container.

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls:Install a closed system or local exhaust. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Dust respirator, self-contained breathing apparatus(SCBA), supplied air respirator,
etc. Use respirators approved under appropriate government standards and follow
local and national regulations.
Hand protection:Impervious gloves.
Eye protection:Safety goggles. A face-shield, if the situation requires.
Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Solid
Physical state (20°C):
Form:Crystal- Powder
Colour:White - Very pale yellow
Odour:No data available
pH: No data available
Melting point/freezing point:110°C
Boiling point/range:No data available
No data available
Flash point:
Flammability or explosive
limits:
Lower:No data available
No data available
Upper:
Relative density:No data available
Solubility(ies):
[Water]Soluble
No data available
[Other solvents]

Section10. STABILITY AND REACTIVITY
Chemical stability:Stable under proper conditions.
Possibility of hazardous No special reactivity has been reported.
reactions:
Incompatible materials: Oxidizing agents
Hazardous decomposition Carbon monoxide, Carbon dioxide, Hydrogen fluoride
products:

Section11. TOXICOLOGICAL INFORMATION
No data available
Acute Toxicity:
Skin corrosion/irritation: No data available
No data available
Serious eye
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
IARC =No data available
NTP =No data available
Reproductive toxicity:No data available

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
No data available
Fish:
Crustacea:No data available
Algae:No data available
Persistence / degradability: No data available
Acid

Section12. ECOLOGICAL INFORMATION
BioaccumulativeNo data available
potential(BCF):
Mobility in soil
No data available
Log Pow:
Soil adsorption (Koc):No data available
No data available
Henry's Law
constant(PaM3/mol):

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.
Observe all federal, state and local regulations when disposing of the substance.

Section14. TRANSPORT INFORMATION
8: Corrosive.
Hazards Class:
UN-No:3261
Corrosive solid, acidic, organic, n.o.s.
Proper shipping name:
Packing group:III

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes Xi: Irritant;
Risk Phrases R36/37/38
Safety Phrases 26-36
RIDADR 3261.0
Hazard Class 8.0
HS Code 2918199090

 Precursor & DownStream

Precursor  1

DownStream  0

 Customs

HS Code 2918199090
Summary 2918199090 other carboxylic acids with alcohol function but without other oxygen function, their anhydrides, halides, peroxides, peroxyacids and their derivatives。Supervision conditions:None。VAT:17.0%。Tax rebate rate:9.0%。MFN tariff:6.5%。General tariff:30.0%

 Synonyms

(S)-3,3,3-Trifluoro-2-hydroxyisobutyric Acid
(S)-3,3,3-Trifluoro-2-hydroxy-2-methylpropanoic acid
(S)-3,3,3-Trifluoro-2-hydroxy-2-Methylpropionic Acid
MFCD07375449
(S)-2-Hydroxy-2-(trifluoromethyl)propionic Acid
S-TFM-LA
Top Suppliers:I want be here


Get all suppliers and price by the below link:

(s)-3,3,3-trifluoro-2-hydroxy-2-methylpropionic acid suppliers


Price: ¥334/250mg

Reference only. check more (s)-3,3,3-trifluoro-2-hydroxy-2-methylpropionic acid price

Hot Compounds More...
Dichloromethane
CAS#:75-09-2
Polyacrylic acid
CAS#:9003-01-4
sodium carbonate
CAS#:497-19-8
Silicon dioxide
CAS#:7631-86-9
Triethanolamine
CAS#:102-71-6
Demeton
CAS#:126-75-0
Water
CAS#:7732-18-5
4-(4-Piperidinyl)morpholine dihydrochloride
CAS#:53617-35-9
Diclofenac sodium
CAS#:15307-79-6
Budesonide
CAS#:51372-29-3