(4-METHYL-1-NAPHTHALENE)BORONICACID

Modify Date: 2024-04-03 19:29:08

(4-METHYL-1-NAPHTHALENE)BORONICACID Structure
(4-METHYL-1-NAPHTHALENE)BORONICACID structure
Common Name (4-METHYL-1-NAPHTHALENE)BORONICACID
CAS Number 165735-95-5 Molecular Weight 204.29100
Density 1.176g/cm3 Boiling Point 369.1ºC at 760mmHg
Molecular Formula C11H12N2S Melting Point 230ºC
MSDS USA Flash Point 177ºC

 Names

Name (4-methyl-2-phenyl-1,3-thiazol-5-yl)methanamine
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.176g/cm3
Boiling Point 369.1ºC at 760mmHg
Melting Point 230ºC
Molecular Formula C11H12N2S
Molecular Weight 204.29100
Flash Point 177ºC
Exact Mass 204.07200
PSA 67.15000
LogP 3.27750
Vapour Pressure 1.21E-05mmHg at 25°C
Index of Refraction 1.614

 MSDS

Name: (4-Methyl-2-phenyl-1 3-thiazol-5-yl)methanamine Material Safety Data Sheet
Synonym: None Known
CAS: 165735-95-5
Section 1 - Chemical Product MSDS Name:(4-Methyl-2-phenyl-1 3-thiazol-5-yl)methanamine Material Safety Data Sheet
Synonym:None Known

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
165735-95-5 (4-Methyl-2-phenyl-1,3-thiazol-5-yl)me 97+ unlisted
Hazard Symbols: C
Risk Phrases: 35

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Causes severe burns.Moisture sensitive.
Potential Health Effects
Eye:
Causes severe eye burns.
Skin:
Causes severe burns.
Ingestion:
Causes severe digestive tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Chronic exposure may cause effects similar to those of acute exposure.

Section 4 - FIRST AID MEASURES
Eyes: Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes).
Skin:
In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give anything by mouth to an unconscious person.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Discard contaminated shoes.
Keep from contact with moist air and steam. Use only with adequate ventilation.
Storage:
Store in a tightly closed container. Corrosives area. Store protected from moisture. Store under an inert atmosphere.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 165735-95-5: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Oil
Color: yellow
Odor: slight
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C11H12N2S
Molecular Weight: 204.30

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions. Moisture sensitive.
Conditions to Avoid:
Moisture.
Incompatibilities with Other Materials:
Oxidizing agents, acids, acid chlorides, moisture.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Will not occur.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 165735-95-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
(4-Methyl-2-phenyl-1,3-thiazol-5-yl)methanamine - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION
Ecotoxicity:
Fish: Pseudomonas putida:

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: II
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: II
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: II

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 35 Causes severe burns.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 165735-95-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 165735-95-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 165735-95-5 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes C: Corrosive;
HS Code 2934100090

 Customs

HS Code 2934100090
Summary 2934100090 other compounds containing an unfused thiazole ring (whether or not hydrogenated) in the structure VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:20.0%

 Synonyms

4-Methyl-2-Phenyl-5-Thiazolemethanamine
(4-Methyl-2-phenyl-1,3-thiazol-5-yl)methylamine