Lanthanum boride

Modify Date: 2024-01-02 08:31:13

Lanthanum boride Structure
Lanthanum boride structure
Common Name Lanthanum boride
CAS Number 12008-21-8 Molecular Weight 203.77200
Density 2.61 g/mL at 25 °C(lit.) Boiling Point N/A
Molecular Formula B6La Melting Point 2530°C
MSDS Chinese USA Flash Point N/A

 Names

Name Lanthanum boride
Synonym More Synonyms

 Chemical & Physical Properties

Density 2.61 g/mL at 25 °C(lit.)
Melting Point 2530°C
Molecular Formula B6La
Molecular Weight 203.77200
Exact Mass 204.96200
Appearance of Characters powder

 MSDS

Name: Lanthanum hexaboride 99% Material Safety Data Sheet
Synonym: Lanthanum borid
CAS: 12008-21-8
Section 1 - Chemical Product MSDS Name:Lanthanum hexaboride 99% Material Safety Data Sheet
Synonym:Lanthanum borid

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
12008-21-8 Lanthanum hexaboride, 99% 99% 234-531-6
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid contact with skin and eyes. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels.
Exposure Limits CAS# 12008-21-8: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: not available
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 2210 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: 2.6100g/cm3
Molecular Formula: B6La
Molecular Weight: 203.78

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
None reported.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
None.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 12008-21-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Lanthanum hexaboride, 99% - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 12008-21-8: No information available.
Canada
CAS# 12008-21-8 is listed on Canada's DSL List.
CAS# 12008-21-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 12008-21-8 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Personal Protective Equipment Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter
Hazard Codes Xi
RIDADR NONH for all modes of transport
WGK Germany 3

 Articles1

More Articles
Maeda, H. et al.

J. Cryst. Growth 121 , 507, (1992)

 Synonyms

Lanthanum hexaboride
MFCD00151350
EINECS 234-531-6
Top Suppliers:I want be here



Get all suppliers and price by the below link:

Lanthanum boride suppliers

Lanthanum boride price