13266-82-5

13266-82-5 structure
13266-82-5 structure

Name oxalate,yttrium(3+),nonahydrate
Synonyms MFCD00150502
Boiling Point 365.1ºC at 760 mmHg
Melting Point decomposes [AES93]
Molecular Formula C6O12Y2
Molecular Weight 441.86900
Flash Point 188.8ºC
Exact Mass 441.75100
PSA 157.80000
Appearance Crystalline | White
Vapour Pressure 2.51E-06mmHg at 25°C
Water Solubility Insoluble in water, moderately soluble in strong mineral acids

Section 1: Product Identification
Chemical Name:Yttrium (III) oxalate hydrate (99.9%-Y) (REO)
CAS Registry Number:13266-82-5
Formula:Y2(C2O4)3.xH2O
EINECS Number:none
Chemical Family:salt of an organic acid
Synonym:Ethanedioic acid, yttrium salt; Oxalic acid, yttrium salt

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title Compound13266-82-5100%1mg/m3 (as Y)1mg/m3 (as Y)

Section 3: Hazards Identification
Soluble oxalates are harmful if swallowed. They precipitate calcium from the bloodstream causing violent
Emergency Overview:
muscular stimulation, convulsions, collapse, and death.
Primary Routes of Exposure:Ingestion, Inhalation of dust.
Eye Contact:May cause moderate to severe irritation of the eyes.
Skin Contact:May cause moderate to severe irritation of the skin.
Inhalation:Dust may be severely irritating to the nose, mucous membranes and respiratory tract.
Harmful if swallowed. Ingestion may cause vomiting, pain, violent muscular stimulation, convulsions, collapse
Ingestion:
and death.
Soluble oxalates remove calcium from the bloodstream. This interferes with the central nervous system
Acute Health Affects:
causing violent convulsions and death.
Prolonged exposure to oxalates can lead to kidney failure resulting from calcium oxalate precipitation in renal
Chronic Health Affects:
tubes
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Antidotes are said to be soluble calcium given orally, and calcium gluconate given intravenously, to be
Ingestion:
administered by trained medical personnel. Keep the victim calm. Give the victim water (only if conscious).

SECTION 5: Fire Fighting Measures
Flash Point:not applicable
Autoignition Temperature:none
Explosion Limits:none
Extinguishing Medium:carbon dioxide, dry powder or foam
If involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained
Special Fire Fighting Procedures:
breathing apparatus and full protective clothing.
Hazardous Combustion andIf involved in a fire this material may emit toxic organic fumes and carbon monoxide.
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:Small spills can be mixed with vermiculite or sodium carbonate and swept up.

SECTION 7: Handling and Storage
Handling and Storage:Store in a sealed container. Keep away from heat and moisture.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear appropriate chemical resistant gloves and protective clothing.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators
Respirator:
requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:white xtl.
Molecular Weight:441.87
Melting Point:no data
Boiling Point:no data
Vapor Pressure:not applicable
Specific Gravity:no data
Odor:none
Solubility in Water:slightly soluble

SECTION 10: Stability and Reactivity
Stability:air and moisture stable solid
Hazardous Polymerization:no hazardous polymerization
Conditions to Avoid:none
Incompatibility:oxidizing agents, concentrated sulfuric acid
Decomposition Products:Carbon dioxide, carbon monoxide, organic vapors, soot, and metal oxides and carbonates.

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:No data available
Mutagenic Effects:No data available
Tetratogenic Effects:No data available

SECTION 12: Ecological Information
Ecological Information:No information available

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA

SECTION 15: Regulatory Information
TSCA:Not listed in the TSCA inventory.
SARA (Title 313):Title compound not listed.
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A
Hazard Codes Xn
Risk Phrases R36/37/38
Safety Phrases S26-S36/37/39
RIDADR UN3288
Packaging Group III
Hazard Class 6.1
The content on this webpage is sourced from various professional data sources. If you have any questions or concerns regarding the content, please feel free to contact service1@chemsrc.com.