Electrophoresis 2005-06-01

Development of monolithic enzymatic reactors in glass microchips for the quantitative determination of enzyme substrates using the example of glucose determination via immobilized glucose oxidase.

Gaber A M Mersal, Ursula Bilitewski

Index: Electrophoresis 26(12) , 2303-12, (2005)

Full Text: HTML

Abstract

A one-step procedure for the immobilization of glucose oxidase in fused-silica capillaries and in glass microchips was developed based on enzyme entrapment in a polyacrylamide-based monolithic column. The inner capillary surface was silanized with gamma-methacryloxypropyltrimethoxysilane (gamma-MAPS) to allow covalent binding of the gel to the surface. The composition of the polymer was optimized to prevent the formation of bubbles, allow liquid transportation by electroosmotic flow and to maintain the enzymatic activity. These requirements resulted in the addition of polyethylene glycol and poly(acrylic acid) to the acrylamide mixture. The gel containing the enzyme was formed in situ in the capillaries, respectively, in one channel of the microchip. In the microchip, it was limited to the sample injection channel by accordingly controlled silanization of the inner capillary surface. Glucose was detected via the amperometric determination of hydrogen peroxide. A linear correlation between signals and glucose concentration was observed from 0.05 to 1.1 mM glucose with a correlation coefficient of 0.999. The enzymatic monolithic microreactor showed no loss of activity during 8 h of continuous use and during storage in the running buffer at 4 degrees C for about 2 months. Interferents, such as ascorbic acid, were separated from the analyte electrophoretically, so that glucose could be quantified in diluted juices.