External ID: MTASE-p

Protocol: PROTOCOL TABLE (as described by Inglese J, Shamu CE and Guy RK. 2007)
SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE; DESCRIPTION.
1; Reagent; 2 uL; SMMTase Enzyme (2x) in reaction buffer, columns 1- 48.
2; Reagent; 1 uL; SAM (4x) in reaction buffer, columns 1-48.
3; Controls; 23 nL; DMSO in column 4; sinefungin in DMSO (0 uM - 40 uM) in 7-point 1:2 dilution series (n = 2) in column 2.
4; Compounds; 23 nL; Columns 5-48.
5; Reagent; 1 uL; Substrate (4x) in reaction buffer, columns 2-48.
6; Time; 20-30 min; Incubation.
7; Reagent; 1 uL; MTase-Glo reagent (5X), columns 1-48.
8; Time; 30 min; Incubation.
9; Reagent; 5 uL; MTase-Glo Detection reagent, columns 1-48.
10; Time; 30 min; Incubation, luminescence evolution.
11; Detection; Luminescence; ViewLux uHTS Microplate Imager (PerkinElmer).

NOTES (numbers refer to Sequence numbers above)
1, 2, 5. White Medium Binding Greiner 1536-well plates (Cat #789175-F, Greiner Bio-One, Monroe, NC); Reaction buffer: 50 mM Tris, pH 8.0, 3 mM MgCl2, 1 mM EDTA, 50 mM NaCl, 1 mM DTT, and 0.1 mg/mL BSA. Evaporation was prevented by covering assay plates with metal lids containing holes to allow gas diffusion.
1. Six SMMTase were profiled: HNMT, GNMT, PNMT, COMT, NNMT, GAMT
2. The corresponding SAM cofactor concentration was used for each SMMTase: HNMT - 9.3 uM SAM; GNMT - 12.1 uM SAM; PNMT - 3.6 uM SAM; COMT - 14.5 uM SAM; NNMT 11.9 uM SAM; GAMT - 5.6 uM SAM.
3, 4. Pintool transfer
5. The corresponding substrate was used for each enzyme: HNMT - 5.3 uM Histamine; GNMT - >500 uM Glycine; PNMT - 16.2 uM Norephinephrine; COMT - 13.7 uM Norephinephrine; NNMT - 3.8 uM Nicotinamide; GAMT - 2.5 uM Guanidinoacetate.6, 8, 10. Room temperature
6. Final reaction conditions: 10 nM COMT, 5 uM SAM, 15 uM norepinephrine, 50 mM Tris, pH 8.0, 3 mM MgCl2, 1 mM EDTA, 50 mM NaCl, 1 mM DTT, and 0.1 mg/mL BSA; refer to tables 2 and S1 for specific timing.
8. Conversion of SAH to ADP; MTase Glo Kit (Promega, Madison, WI).
10. Conversion of ADP to ATP and detection by UltraGlo luciferase; MTase Glo Kit (Promega, Madison, WI).
11. Settings: 20 s exposure, 1X binning, high gain, medium speed.

REFERENCES:
Inglese J, Shamu CE and Guy RK, Reporting data from high throughput screening of small molecule libraries, Nature Chemical Biology, 2007, 3(8): 438-441. doi.org/10.1038/nchembio0807-438.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are assayed at single point activity (40 uM).
2. Active / Inactive compound calling is based on the results of the enzyme assay panel. ACTIVE compounds have PUBCHEM_ACTIVITY_SCORE = 50 and are compounds that have <= -50% max response in ANY ONE of the six enzymes. INACTIVE compounds have PUBCHEM_ACTIVITY_SCORE = 0 and are those that have >= -30% max response in ALL SIX enzymes. The remaining compounds are INCONCLUSIVE and have PUBCHEM_ACITIVITY_SCORE = 30.

External ID: MScreen:TargetID_600

Protocol: C-terminally 6xHis tagged CDK2/Cyclin A complex and N-terminally Flag tagged CDC25B C473S (372-566) were expressed and purified. Proteins were incubated together at a final concentration of 125 nM each for 1 hr prior to incubation with compound for 1 hr, followed by addition of anti-6xHis europium cryptate donor beads (Cisbio) and anti-Flag XL-665 acceptor beads (Cisbio) at a final dilution of 1:350 for 1 hr. 20mM potassium fluoride was added 10 minute prior to plate reading. Assay reagents were dispensed using a multidrop liquid dispenser (Thermo Scientific) onto uncoated, black, low-volume, 384-well plates (Corning). Assay plates were quantified using an Envision plate reader (Perkin-Elmer) with excitation of the europium crytate donor at 337 nm wavelength and emission of the donor at 620 nm and emission of the XL-665 acceptor at 665 nm in 18 uL volumes. Assays were performed in a buffer containing 50 mM Tris (pH 7.5), 50 mM NaCl, 10mM MgCl2, 1mM TCEP, with addition of and 1mM ATP, 0.05% BSA, and 0.05% Tween-20 immediately prior to the start of the assay.

Comment: The activity outcome is based on a Z-score (number of standard deviations from the negative control mean) of 3 or higher on at least 50% times that the sample was screened.
For instance, if the sample was screened in n=4 runs, it would be considered active only if it had a Z-score of 3 or above in at least 2 runs.

This screen was funded by NIH grant number: R01CA181185

External ID: WaveGuideAssay:441

Protocol: For initial screening, TetON human embryonic kidney cells (HEK293) expressing GluA2 and stargazin, gamma-2, were plated in 384-well BD purecoat amine-coated plates at 16k cells/well. Cells were induced with 8 ug/mL doxycycline in the presence of 30 uM NBQX and incubated O/N at 37deg in 5% CO2. They were washed with Hank's Balanced Salt Solution (HBSS) containing 20 mM HEPES, pH 7.4 and FLIPR VSD dye solution was added and incubated on the cells at room temperature for 45 minutes. The cell plate was loaded into the Hamamatsu Functional Drug Screening System 6000 (FDSS), 10 seconds of background were collected before addition of compound at 30 uM final concentration. Data collection continued at 1Hz sampling and experimentally determined EC50 glutamate stimulus was added at 300 seconds. Controls of 1 mM glutamate (maximal effect) and NBQX (antagonist) were used to calculate a Z' score per plate.

Data were processed using the Vanderbilt screening analysis platform, WaveGuide. Data were normalized by dividing the raw fluorescence for all time points by an average of the baseline fluorescence. For each well, 4 values were calculated as follows:

1. CMPDslope was the slope of the normalized value within the timeframe 11-18 seconds,
2. CMPDmaxmin was the difference in maximal and minimal normalized value within the timeframe 8-100 seconds
3. GLUslope was the slope of the normalized value within the timeframe 310-315 seconds, and
4. GLUmaxmin was the difference in maximal and minimal normalized value within the timeframe 301-380 seconds.

Compounds were marked as hits where any of the above calculated results for a compound differed by at least three standard deviations from the mean for that calculation across all compounds in the plate.

Compounds denoted as 'hits' were given the score of '100' and outcome of 'active'. All other compounds were denoted as 'inactive' and given a score of '0'.

Comment:

External ID: VANDERBILT_HTS_GIRK2_HPP

Protocol: To screen for modulators of the G protein-gated inwardly-rectifying potassium channel subunit 2 (GIRK2) homomeric channels, HEK293 cells were engineered to overexpress GIRK2 and the neuropeptide Y receptor type 4 (NPY4). The purpose of NPY4 overexpression was to promote modest activation (~30% activity) of GIRK2 channels upon NPY4 activation with human pancreatic polypeptide (hPP). These cells were screened using a high-throughput thallium-flux assay in a 384-well format. High-throughput thallium flux assays are based on three principles: (1) extracellular thallium can permeate through potassium channels into cells, (2) the fluorescent dye Thallos enters and stays in the cytoplasm of HEK293 cells, and (3) the fluorescence of Thallos increases dramatically when it interacts with thallium ions. Compounds that modulate the activity of an overexpressed channel, in this case GIRK2, are identified by the change in fluorescence that results from changes in thallium influx into cells through the overexpressed channel.

The screening protocol was conducted as follows. One hour prior to screening, cells were loaded with 1.5 micromolar (muM) Thallos in assay buffer (1x Hank's Balanced Salt Solution and 20 millimolar (mM) HEPES). The liquid handling and imaging was conducted using a kinetic-imaging plate reader, Panoptic (WaveFront Biosciences). Before screening, Thallos-containing buffer was removed from cells and replaced with 20 microliters (muL) per well of assay buffer. Compounds were dissolved in assay buffer at 20 muM. After 8 seconds of imaging, 20 muL of compound solution was added per well and allowed to incubate for 150 seconds. Next, 10 muL of a solution containing 2.0 mM thallium and 3.5 nanomolar (nM) hPP in Base Buffer (125 mM NaHCO3, 1 mM MgSO4, 1.8 mM CaSO4, 5mM Glucose, and 20 mM HEPES) was added to the wells. 30 seconds later, 12 muL of base buffer containing 2.0 mM thallium and 1 muM hPP, a maximally-activating concentration, was added to each well. Data was collected for 60 seconds after this final addition. The positive control for this screen was 16.6 muM eprinomectin, a natural product previously identified as a GIRK2 activator as part of a small-scale pilot screen. Microsoft Excel was utilized for data analysis. Data were normalized, F/Fo, on a well-to-well basis to account for differences in cell number. Compound activity was analyzed by comparing the sums of control-subtracted amplitudes of fluorescence intensity at 20 seconds after each thallium addition. The top 0.5% compounds corresponding to wells that demonstrated the largest increases in fluorescence were selected as "hits" for counter screening, as described below.

All 34,131 compounds screened using the method described above are listed in column OUTCOME_SCREEN_HITS. The 167 compounds selected as hits based on the above criteria are labelled ACTIVE in this column. Fluorescent compounds were included in the inactive compounds and marked as INACTIVE.

The 167 active compounds from column OUTCOME_SCREEN_HITS were tested for non-specific activity in untransfected HEK293 cells using assay conditions otherwise identical to the primary screen. Column OUTCOME_HEK_COUNTERSCREEN lists the 39 compounds that displayed an increase in fluorescence upon thallium addition, labelled with ACTIVE.

The 128 compounds which were identified as hits in the primary screen but inactive when tested in untransfected HEK293 cells were tested for activity in GIRK2-overexpressing HEK293 cells that did not express NPY4 receptor. Column OUTCOME_GIRK2_COUNTERSCREEN lists the 8 compound that displayed an increase in fluorescence upon thallium addition, labelled with ACTIVE.

The 8 active compounds from column OUTCOME_GIRK2_COUNTERSCREEN were tested at various concentrations to determine if compound activity was concentration dependent. Column OUTCOME_GIRK2_DOSE_RESPONSE provides the efficacy of these compounds; activity of all compounds at the provided concentrations was normalized to the activity of VU0529331 at 37.5 muM, which was the highest efficacy observed during this screening. For each compound concentration listed, the efficacy of that compound provided refers to the normalized, control-subtracted fluorescence intensity at 15 seconds after the addition of thallium. Compounds that demonstrated >5% efficacy and concentration-dependent activity were labelled as ACTIVE.

Finally, column Outcome combines all of the information from the above counterscreens together, indicating the 6 hits from this GIRK2 screen.

Comment: