External ID: SERCaMPGLuc-p1-antagonist

Protocol: PROTOCOL TABLES
SEQUENCE No. (1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Reagent; 5 uL; 1000 SH-SY5Y cells per wells
2; Time; 5 hour; 37C, 5% CO2
3; Compound; 23 nL; Control inhibitor / compound library
4; Time; 16 hour; 37C, 5% CO2
5; Reagent; 100 nM; Thapsigargin
6; Time; 4 hour; 37C, 5% CO2
7; Reagent; 1 uL; 0.5x coelenterazine
8; Detection; Luminescence; ViewLux imaging system

NOTES (numbers refer to sequence above)
1; SH-SY5Y human neuroblastoma cells stably expressing GLuc-SERCaMP (SH-SY5Y-GLuc-ASARTDL) cells were seeded in 1,536 well white tissue culture treated plates (Corning, Cat# 7464) in DMEM-high glucose-sodium pyruvate (ThermoFisher Scientific, Cat #10569) supplemented with 10% bovine growth serum (Hyclone), 10 U/ml penicillin (Gibco), 10 ug/ml streptomycin (Gibco), and 20 mM HEPES.
2; Assay plates were incubated for 5 hour at 37C in a humidified incubator containing 5% CO2.
3; qHTS libraries (23 nl, final concentrations of 1.53 uM, 7.67 uM, 38.3 uM) or controls (neutral control: DMSO, positive control: dantrolene) were added using a Kalypsis pin-tool Robotic System equipped with 1536 pinheads.
4; Cells were then incubated for 16 hours at 37C, 5% CO2.
5; Thapsigargin was added at 100 nM to deplete ER calcium stores.
6; Cells were incubated for 4 hour (37oC, 5% CO2)
7; Gaussia luciferase in the medium was measured by adding 1 ul of 0.5x coelenterazine (final concentration 0.07x) prepared in Gaussia Luciferase Glow Assay Buffer (Pierce), without addition of the Cell Lysis Buffer Reagent.
8; Luminescence was measured using a ViewLux high-432 throughput CCD imaging system (Perkin Elmer) equipped with clear filters. Compounds exhibiting inhibitory activity (defined as curve class -1.1, -1.2, -1.3, -1.4, -2.1, -2.2, -2.3, -2.4, -3) were identified by normalizing plate-wise to corresponding intra-plate controls (neutral control = Tg only; positive control (100% inhibition) = DMSO vehicle) with percent activity derived using in-house software (https://tripod.nih.gov/curvefit). The same controls were also used for the calculation of the Z' factor, a measure of assay quality control, as previously described (Zhang et al., 1999). For the initial validation of activity in the SERCaMP assays, hits from the primary screen were assayed again at 11-concentrations (1.3 nM - 76.6 uM). SH-SY5Y-GLuc-SERCaMP cells were assayed for ER Ca2+ depletion as outlined above.

Reference:
1. Zhang, J.H., Chung, T.D., and Oldenburg, K.R. (1999). A Simple Statistical Parameter for Use in Evaluation and Validation of High Throughput Screening Assays. J Biomol Screen 4, 67-73.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: epac1-activator-v

Protocol: Briefly, three uL of reagents (100 nM EPAC1, 250 nM RAP1B-BODIPY-GDP, 50 uM GDP) were dispensed into a 1536-well Greiner black solid-bottom medium binding assay plate. Controls and test compounds (23 nL) were transferred to the plate via a Kalypsys pin tool equipped with a 1536-pin array. The plates were centrifuged at 1,000 rpm for 15 seconds followed by 5 minute incubation at room temperature. The assay plates were read at 5 minute intervals for 30 minutes in the ViewLux plate reader using 480nm excitation and 540nm emission filters. The results were normalized to the agonist positive control of 6.5 mM cAMP.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent activators are ranked higher than compounds that showed apparent inhibition.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = 1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 1.2 || ratio.curve_class == 2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds also have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: epac1-inhibitor-v

Protocol: Briefly, three uL of reagents (100 nM EPAC1, 250 nM RAP1B-BODIPY-GDP, 50 uM GDP) were dispensed into a 1536-well Greiner black solid-bottom medium binding assay plate. Controls and test compounds (23 nL) were transferred to the plate via a Kalypsys pin tool equipped with a 1536-pin array. The plates were centrifuged at 1,000 rpm for 15 seconds followed by 5 minute incubation at room temperature. The assay plates were read at 5 minute intervals for 30 minutes in the ViewLux plate reader using 480nm excitation and 540nm emission filters. The results were normalized to the agonist positive control ATA and DMSO.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: epac2-activator-v2

Protocol: Briefly, three uL of reagents (100 nM EPAC2, 250 nM RAP1B-BODIPY-GDP, 50 uM GDP) were dispensed into a 1536-well Greiner black solid-bottom medium binding assay plate. Controls and test compounds (23 nL) were transferred to the plate via a Kalypsys pin tool equipped with a 1536-pin array. The plates were centrifuged at 1,000 rpm for 15 seconds followed by 5 minute incubation at room temperature. The assay plates were read at 5 minute intervals for 30 minutes in the ViewLux plate reader using 480nm excitation and 540nm emission filters. The results were normalized to the agonist positive control of 6.5 mM cAMP.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent activators are ranked higher than compounds that showed apparent inhibition.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = 1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 1.2 || ratio.curve_class == 2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds also have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: RMI-FANCM-MM2

Protocol: FP HTS. Screening took place at the University of Wisconsin Small Molecule Screening and Synthesis Facility. A master mix of RMI core complex and F-MM2 (30 microL per well) was plated in black 384 shallow well plates (ThermoFisher, Waltham, MA), using a BioTek "MicroFlo Select" reagent dispenser. Compounds were added using a Beckman FX liquid handler; 0.33 microL of 10 mM stock was added for a final compound concentration of 33 microM. MM2 and cMM2 were each added to 4 wells of master mix per plate to a final concentration of 10 muM to serve as controls. Following compound addition, plates were covered, centrifuged briefly, and incubated for 20 minutes at room temperature. FP measurements were taking using a Tecan "Safire 2" microplate reader. Instrument settings were as follows: top read, EX 470, EM 525/20, G-factor 0.89947. A suitable gain was calculated from the first plate of each day. Z' scores for were calculated for each plate; plates with Z' scores <0.5 were rerun prior to analysis.

Comment:

External ID: epac2-inhibitor-v2

Protocol: Briefly, three uL of reagents (100 nM EPAC2, 250 nM RAP1B-BODIPY-GDP, 50 uM GDP) were dispensed into a 1536-well Greiner black solid-bottom medium binding assay plate. Controls and test compounds (23 nL) were transferred to the plate via a Kalypsys pin tool equipped with a 1536-pin array. The plates were centrifuged at 1,000 rpm for 15 seconds followed by 5 minute incubation at room temperature. The assay plates were read at 5 minute intervals for 30 minutes in the ViewLux plate reader using 480nm excitation and 540nm emission filters. The results were normalized to the agonist positive control of 6.5 mM cAMP.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: TDP1100

Protocol: DT40-hTDP1 cells without 20 nM Camptothecin (add 20 microL of DMSO in 1 L of cell culture medium) were dispensed at 400 cells/5microL/well in tissue culture treated 1536-well white wall/solid bottom assay plates (Greiner Bio-One North America, NC, U.S.A.) using a Multidrop Combi 8 channel dispenser (Thermo Fisher, Waltham, MA, USA). 23 nL compounds and controls were transferred using the pin tool (Kalypsys, San Diego, CA, USA) to the assay plates. The assay plates were then incubated at 37 masculineC for a minimum 48 hr. Three microL of Cell Titer Glo solution was added to the plates and incubated at RT in dark for 30 min. Luminescence was read using ViewLux (Perkin Elmer) with 1 sec exposure slow speed, high gain and 2x binning.

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: Vaccinia-p2mCherry

Protocol: A549 cells were plated at a concentration of approximately 6,000 cells per well in clear-bottom black-walled plates. Compounds were added to the assay plate followed by addition of virus (LREV) that expresses the Venus fluorescent protein early in viral ininfection. During the late viral infection, mCherry was also added to the plate at an MOI of 10 (~ 60,000 plaque forming units (PFU) of virus). Following virus addition, plates were incubated in a tissue-culture incubator for 12-18 hours. At increasing times postinfection, fluorescence from both Venus and mCherrry was determined using a plate-reader and standard conditions for observing Venus fluorescence (EX515/EM530) and mCherry fluorescence (EX587/EM610). In each plate, positive controls (virus infection in the presence of 1% DMSO only) and an inhibitory drug control (AraC at 500 nM) was included and used to normalize the data.

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: TDP1101

Protocol: DT40-hTDP1 cells with 20 nM Camptothecin (add 20 microL of 1 mM CPT stock in 1 L of cell culture medium) were dispensed at 400 cells/5microL/well in tissue culture treated 1536-well white wall/solid bottom assay plates (Greiner Bio-One North America, NC, U.S.A.) using a Multidrop Combi 8 channel dispenser (Thermo Fisher, Waltham, MA, USA). 23 nL compounds and controls were transferred using the pin tool (Kalypsys, San Diego, CA, USA) to the assay plates. The assay plates were then incubated at 37 masculineC for a minimum 48 hr. Three microL of Cell Titer Glo solution was added to the plates and incubated at RT in dark for 30 min. Luminescence was read using ViewLux (Perkin Elmer) with 1 sec exposure slow speed, high gain and 2x binning.

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: PolK100

Protocol: Three microliters of reagents (buffer in column 3 and 4 as negative control and 10 nM Pol kappa in columns 1, 2, and 5-48) were dispensed into a 1536-well black solid-bottom plate. Compounds (23 nL) were transferred via Kalypsys pin tool equipped with 1536-pin array. The plates were then incubated for 15 min at room temperature, and 1 uL substrate (50 nM final concentration) were then added to start the reaction and kinetically read twice at 0 min and 10 min on the Viewlux reader

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.