External ID: CHEMBL5106143

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: Bioorg Med Chem Lett
Year: 2022
Volume: 73
First Page: 128919
Last Page: 128919
DOI: 10.1016/j.bmcl.2022.128919

Target ChEMBL ID: CHEMBL392
ChEMBL Target Name: A549
ChEMBL Target Type: CELL-LINE - Target is a specific cell-line
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL2346399

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: Bioorg. Med. Chem. Lett.
Year: 2013
Volume: 23
Issue: 6
First Page: 1846
Last Page: 1852
DOI: 10.1016/j.bmcl.2013.01.022

Target ChEMBL ID: CHEMBL396
ChEMBL Target Name: NCI-H460
ChEMBL Target Type: CELL-LINE - Target is a specific cell-line
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL5106144

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: Bioorg Med Chem Lett
Year: 2022
Volume: 73
First Page: 128919
Last Page: 128919
DOI: 10.1016/j.bmcl.2022.128919

Target ChEMBL ID: CHEMBL399
ChEMBL Target Name: HeLa
ChEMBL Target Type: CELL-LINE - Target is a specific cell-line
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: SNCA-p-activity-luciferase

Protocol: PROTOCOL TABLE
SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE; DESCRIPTION

1; Cells; 4 uL; Dispense 1500 HEK-293-SNCA-luc cells/well into Greiner 1536-well white / solid bottom tissue culture treated plate. The plate was covered with metal lids with gas-exchange holes.
2; Incubate; 24 hours; Incubate at 37C, 5% CO2, 95% RH.
3; Compounds; 23 nL; Compounds and controls were transferred via a Kalypsys Pin Tool (Wako USA) equipped with a 1536-slotted pin array. The plate was covered with metal lids with gas-exchange holes.
4; Incubate; 24 hours; Incubate at 37C, 5% CO2, 95% RH.
5; Dispense; 1 uL; Dispense Gly-Phe-7-amino-4-trifluoromethylcoumarin (GF-AFC, prepared at 125 uM in PBS) was added. The plate was covered with metal lids with gas-exchange holes.
6; Incubate; 30 min; Incubate at 37C, 5% CO2.
7; Detector; Fluorescence; Measure fluorescence with ViewLux microplate reader (PerkinElmer) equipped with 405/10 excitation and 540/25 emission filters.
8; Dispense; 3 uL; Dispense ONE-Glo (PerkinElmer) lucifase detection reagent was added to each well. Plates were covered with metal lids with gas-exchange holes.
9; Incubate; 15 min; Incubate at room temperature.
10; Detector; Luminescence; Measure luminescence with ViewLux microplate reader (PerkinElmer) equipped with clear filters.

NOTES (numbers refer to sequence above)
1; HEK-293-SNCA-luc were cultured and suspended in phenol-red free DMEM (4.5 g/L glucose, 25 mM HEPES, cat #21063 (Thermo)).
3; Compounds were added to the assay plate in an 11-point intra plate dose response, 1:3 titration in DMSO with a final concentration range of xxx - yyy uM. Vehicle-only plates, with DMSO being pin-transferred to every well, were inserted at the beginning of screening runs to confirm expected assay performance. Activity was normalized to wells containing medium only (-100% activity, full inhibition) and SNCA-luc cells treated with DMSO vehicle control (0% activity), contained on the same plate as test samples.
10; Signals were analyzed, and dose-response curves were fit using the Hill equation. Compounds in curve classes -1.1, -1.2, -2.1, -2.2 in the SNCA-luc assay were considered active. Compounds were eliminated from further consideration if also active (curve class -1.1, -1.2, -1.3, -1.4, -2.1, -2.2, -2.3, -2.4) in the GF-AFC cytotoxicity assay.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: CHEMBL2346402

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: Bioorg. Med. Chem. Lett.
Year: 2013
Volume: 23
Issue: 6
First Page: 1846
Last Page: 1852
DOI: 10.1016/j.bmcl.2013.01.022

Target ChEMBL ID: CHEMBL614925
ChEMBL Target Name: SK-OV-3
ChEMBL Target Type: CELL-LINE - Target is a specific cell-line
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL5106141

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: Bioorg Med Chem Lett
Year: 2022
Volume: 73
First Page: 128919
Last Page: 128919
DOI: 10.1016/j.bmcl.2022.128919

Target ChEMBL ID: CHEMBL385
ChEMBL Target Name: K562
ChEMBL Target Type: CELL-LINE - Target is a specific cell-line
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL705265

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J. Med. Chem.
Year: 1988
Volume: 31
Issue: 4
First Page: 847
Last Page: 857
DOI: 10.1021/jm00399a028

Target ChEMBL ID: CHEMBL386
ChEMBL Target Name: L1210
ChEMBL Target Type: CELL-LINE - Target is a specific cell-line
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL2346401

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: Bioorg. Med. Chem. Lett.
Year: 2013
Volume: 23
Issue: 6
First Page: 1846
Last Page: 1852
DOI: 10.1016/j.bmcl.2013.01.022

Target ChEMBL ID: CHEMBL613977
ChEMBL Target Name: SF-268
ChEMBL Target Type: CELL-LINE - Target is a specific cell-line
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL705267

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J. Med. Chem.
Year: 1988
Volume: 31
Issue: 4
First Page: 847
Last Page: 857
DOI: 10.1021/jm00399a028

Target ChEMBL ID: CHEMBL386
ChEMBL Target Name: L1210
ChEMBL Target Type: CELL-LINE - Target is a specific cell-line
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL2346391

Protocol: N/A

Comment: Journal: Bioorg. Med. Chem. Lett.
Year: 2013
Volume: 23
Issue: 6
First Page: 1846
Last Page: 1852
DOI: 10.1016/j.bmcl.2013.01.022

Target ChEMBL ID: CHEMBL3140325
ChEMBL Target Name: DNA
ChEMBL Target Type: NUCLEIC-ACID - Target is DNA, RNA or PNA
Relationship Type: M - Molecular target other than protein assigned
Confidence: Target assigned is molecular non-protein target

External ID: CHEMBL2346395

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: Bioorg. Med. Chem. Lett.
Year: 2013
Volume: 23
Issue: 6
First Page: 1846
Last Page: 1852
DOI: 10.1016/j.bmcl.2013.01.022

Target ChEMBL ID: CHEMBL3879801
ChEMBL Target Name: NON-PROTEIN TARGET
ChEMBL Target Type: NON-MOLECULAR - Target has not been defined at a molecular level, only the non-molecular entity which is affected (e.g., organism, cell line etc)
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL2346394

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: Bioorg. Med. Chem. Lett.
Year: 2013
Volume: 23
Issue: 6
First Page: 1846
Last Page: 1852
DOI: 10.1016/j.bmcl.2013.01.022

Target ChEMBL ID: CHEMBL3879801
ChEMBL Target Name: NON-PROTEIN TARGET
ChEMBL Target Type: NON-MOLECULAR - Target has not been defined at a molecular level, only the non-molecular entity which is affected (e.g., organism, cell line etc)
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: s-my-keats_OPM1-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: s-my-OC1MY5-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: HMS1625

Protocol: The fix-reporter plasmid was conjugated into this strain which the stably integrates into the chromosome using the mini-Tn7 system (PMID: 15908923). This plasmid consists of the fixK promoter, which is a target of the fixLJ pathway driving expression of GFP.
The day before screen an overnight culture of B. multivorans strain VC7102, with fix reporter, is set up in tryptic soy broth (TSB) at 37 degrees C with shaking. The day of the screen the overnight culture is diluted 1:100 in fresh tryptic soy broth.
The day of the screen, 30 microL of tryptic soy broth (TSB) is pipetted into columns 1-22 of a 384-well plate (Corning 3764) using the Combi multidrop dispenser. To column 24, 30 microL of TSB containing 78 microM of Benserazide TSB is added for a positive control. To column 23, 30 microL of TSB containing with DMSO (0.078% v/v in TSB) is added for a negative control. 300 nL of each compound are pin-transferred to each plate. For every compound plate 2 replicate assay plates are set up. 30 microL of the 1:100 diluted-B. multivorans strain VC7102 is added to each well using the Combi. Initial OD600 and GFP are measured using the PerkinElmer EnVision. Plates are stacked 5 high, covered with lids and incubated at 37 degrees C overnight (~18 h).
The following day, assay plates are read using a PerkinElmer EnVision (600 nm filter and GFP).
Positive control: Benserazide 39 microM in column 24 (No positive control was used for plates 2089 & 2090; Plates 2091-2093: columns 1 & 24)
Negative control: DMSO 300 nL/well in column 23 (For plates 2089 & 2090 negative controls were located in columns 2 & 24; plates 2091-2093: columns 2 & 23)

Comment: Analysis method:
For each compound well, the initial GFP value was subtracted from overnight GFP value to calculate the deltaGFP. The mean and standard deviation of the negative control wells deltaGFP (column 23) on both replicate plates was calculated. Wells with replicate average deltaGFP at least 3 standard deviations above the plate negative control deltaGFP average were scored as potential positives.

To determine activity scores, Z-scores were calculated for each replicate separately based on the replicate negative control deltaGFP plate average and standard deviation. The replicate average deltaGFP Z-scores were used for activity scores, with activity score of 100 set to Z-score = 4 and activity score = 0 (no activity) set to Z-score = 0. Z-scores > 4 were considered activity score = 100, and Z-scores < 0 were considered activity score = 0.

External ID: s-my-KMS_34-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: s-my-keats_L363-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: s-my-keats_OCIMY7-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: s-my-MM1R-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: s-my-mm1s-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.