前往化源商城

52055-23-9 靶点实验数据

HepG2 Cytotoxicity Assay Measured in Cell-Based System Using Plate Reader - 7071-02_Inhibitor_Dose_DryPowder_Activity_Set16
来源:11812 靶标:N/A
External ID: FATTTLab-Algae-Lipid
Protocol: Cells were pre-grown to mid-log phase in TAP media. For primary screen, cells were seeded at low density of 500,000 / well in 384-well plate. Compound in DMSO was added to each well at a final concentration of 10 micromolar and cells were allowed to grow for 72 hours. At the end of assay, Nile Red (30 uM f.c.) was added and plates were incubated at 37 C for 60 mins in dark. Fluorescence intensity was measured. Readouts were reported as normalized fold change in the intensity of treated versus control.
Comment: Reference:
1. Wase, N., Tu, B., Black, P. N. & DiRusso, C. C. Phenotypic screening identifies Brefeldin A/Ascotoxin as an inducer of lipid storage in the algae Chlamydomonas reinhardtii. Algal Research 11, 74-84 (2015).

2. Identification and metabolite profiling of chemical activators of lipid accumulation in green algae
#Nishikant Wase, Boqiang Tu, James W Allen, Paul N Black, Concetta C DiRusso
#Plant Physiology Jun 2017, pp.00433.2017; DOI: 10.1104/pp.17.00433
#http://www.plantphysiol.org/content/early/2017/06/26/pp.17.00433

Patent:
DiRusso, C., & Wase, N. (2016). Compounds for Increasing Lipid Synthesis and Storage. United States#NUtech Ventures (Lincoln, NE, US) http://www.freepatentsonline.com/y2016/0312253.html

For additional Information please contact:

Prof. Concetta C. DiRusso
Department of Biochemistry
University of Nebraska-Lincoln
cdirusso2@unl.edu

Nishikant Wase, PhD
Department of Biochemistry
University of Nebraska-Lincoln
nishikant.wase@gmail.com
HIT_COMPOUND_IN_SCREEN
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
HepG2 Cytotoxicity Assay Measured in Cell-Based System Using Plate Reader - 7071-02_Inhibitor_Dose_DryPowder_Activity_Set16
来源:ChEMBL 靶标:Leukotriene A-4 hydrolase
External ID: CHEMBL2320181
Protocol: N/A
Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: Eur. J. Med. Chem.
Year: 2013
Volume: 59
First Page: 160
Last Page: 167
DOI: 10.1016/j.ejmech.2012.10.057

Target ChEMBL ID: CHEMBL4618
ChEMBL Target Name: Leukotriene A4 hydrolase
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned
PubChem Standard ValueStandard TypeStandard RelationStandard ValueStandard UnitsData Validity Comment
100IC50>100000nM
2.4IC50=2400nM
100IC50>100000nM
HepG2 Cytotoxicity Assay Measured in Cell-Based System Using Plate Reader - 7071-02_Inhibitor_Dose_DryPowder_Activity_Set16
来源:ChEMBL 靶标:Phospholipase A2, membrane associated
External ID: CHEMBL2320180
Protocol: N/A
Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: Eur. J. Med. Chem.
Year: 2013
Volume: 59
First Page: 160
Last Page: 167
DOI: 10.1016/j.ejmech.2012.10.057

Target ChEMBL ID: CHEMBL3474
ChEMBL Target Name: Phospholipase A2 group IIA
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned
PubChem Standard ValueStandard TypeStandard RelationStandard ValueStandard Units
71IC50=71000nM
9.2IC50=9200nM
8.6IC50=8600nM
HepG2 Cytotoxicity Assay Measured in Cell-Based System Using Plate Reader - 7071-02_Inhibitor_Dose_DryPowder_Activity_Set16
来源:20881 靶标:interleukin-1 receptor-like 1 isoform [homo sapiens]
External ID: ST2_IL33_Inhibitors_Primary_Screening_77700
Protocol: High-throughput screening was performed at Indiana University screening facility (Indiana University, Indianapolis, IN).

In summary, a mixture of ST2 and IL-33 was prepared by adding 0.30 microL of 14.1 microM recombinant human ST2-Fc Chimera and 0.30 microL of 55.25 biotinylated recombinant human IL-33 to 1.4 mL of assay buffer. In the HTS, each well of a 384-well Proxi-plate was first blocked by 100 microL of assay buffer for 1 h at room temperature. After removing the blocking buffer, 20 microL of ST2/IL-33 mixture was pipetted into each well and incubated at room temperature for 1 h followed by addition of compounds at 17 microM (0.8 microL) to each well and incubated at room temperature for 1 h. Ten microliters of 60 microg/mL anti-6xHis-conjugated AlphaLISA acceptor beads were added to each well and incubated at room temperature for 1 h before addition of 10 microL of 60 microg/mL of streptavidin-labeled AlphaLISA donor beads for incubation at room temperature for 30 min. Incubation of acceptor and receptor beads was conducted in darkness. The well with 3 nM ST2 alone was used as a negative control, whereas the ST2/IL-33 mixture with a human ST2 antibody added at 0.45 ng/microL was used as the positive control. Plates were read using the Envision Plate Reader. The buffer used in the assay contains 14.37 mL PBS, 30 microL Tween 20, and 600 microL of 5% bovine serum albumin in PBS.
Comment: PubChem active indicates >= 30% inhibition of ST2/IL-33 at 17 uM of the compound. Inconclusive: >=10% and < 30% inhibition.
% Inhibition
98
97
97
97
97
97
96
96
96
96
95
95
94
94
93
92
92
89
88
85
HepG2 Cytotoxicity Assay Measured in Cell-Based System Using Plate Reader - 7071-02_Inhibitor_Dose_DryPowder_Activity_Set16
来源:ChEMBL 靶标:Leukotriene A-4 hydrolase
External ID: CHEMBL2320182
Protocol: N/A
Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: Eur. J. Med. Chem.
Year: 2013
Volume: 59
First Page: 160
Last Page: 167
DOI: 10.1016/j.ejmech.2012.10.057

Target ChEMBL ID: CHEMBL4618
ChEMBL Target Name: Leukotriene A4 hydrolase
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned
PubChem Standard ValueStandard TypeStandard RelationStandard ValueStandard Units
0.67IC50=670nM
6.8IC50=6800nM