External ID: CHEMBL3782226

Protocol: N/A

Comment: Journal: Eur. J. Med. Chem.
Year: 2016
Volume: 114
First Page: 24
Last Page: 32
DOI: 10.1016/j.ejmech.2016.02.045

Target ChEMBL ID: CHEMBL387
ChEMBL Target Name: MCF7
ChEMBL Target Type: CELL-LINE - Target is a specific cell-line
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: SNCA-p-activity-luciferase

Protocol: PROTOCOL TABLE
SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE; DESCRIPTION

1; Cells; 4 uL; Dispense 1500 HEK-293-SNCA-luc cells/well into Greiner 1536-well white / solid bottom tissue culture treated plate. The plate was covered with metal lids with gas-exchange holes.
2; Incubate; 24 hours; Incubate at 37C, 5% CO2, 95% RH.
3; Compounds; 23 nL; Compounds and controls were transferred via a Kalypsys Pin Tool (Wako USA) equipped with a 1536-slotted pin array. The plate was covered with metal lids with gas-exchange holes.
4; Incubate; 24 hours; Incubate at 37C, 5% CO2, 95% RH.
5; Dispense; 1 uL; Dispense Gly-Phe-7-amino-4-trifluoromethylcoumarin (GF-AFC, prepared at 125 uM in PBS) was added. The plate was covered with metal lids with gas-exchange holes.
6; Incubate; 30 min; Incubate at 37C, 5% CO2.
7; Detector; Fluorescence; Measure fluorescence with ViewLux microplate reader (PerkinElmer) equipped with 405/10 excitation and 540/25 emission filters.
8; Dispense; 3 uL; Dispense ONE-Glo (PerkinElmer) lucifase detection reagent was added to each well. Plates were covered with metal lids with gas-exchange holes.
9; Incubate; 15 min; Incubate at room temperature.
10; Detector; Luminescence; Measure luminescence with ViewLux microplate reader (PerkinElmer) equipped with clear filters.

NOTES (numbers refer to sequence above)
1; HEK-293-SNCA-luc were cultured and suspended in phenol-red free DMEM (4.5 g/L glucose, 25 mM HEPES, cat #21063 (Thermo)).
3; Compounds were added to the assay plate in an 11-point intra plate dose response, 1:3 titration in DMSO with a final concentration range of xxx - yyy uM. Vehicle-only plates, with DMSO being pin-transferred to every well, were inserted at the beginning of screening runs to confirm expected assay performance. Activity was normalized to wells containing medium only (-100% activity, full inhibition) and SNCA-luc cells treated with DMSO vehicle control (0% activity), contained on the same plate as test samples.
10; Signals were analyzed, and dose-response curves were fit using the Hill equation. Compounds in curve classes -1.1, -1.2, -2.1, -2.2 in the SNCA-luc assay were considered active. Compounds were eliminated from further consideration if also active (curve class -1.1, -1.2, -1.3, -1.4, -2.1, -2.2, -2.3, -2.4) in the GF-AFC cytotoxicity assay.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: CYP273

Protocol: Tox21 Assay Protocol Summary:

Two ul of enzyme-substrate mix was dispensed into medium binding white/solid 1536-well plates (Greiner Bio-One North America Inc., Monroe, NC) using a BioRaptr Flying Reagent Dispenser (FRD, Beckman Coulter, Brea, CA). Compounds dissolved in DMSO and positive control (furafyllline) were transferred to the assay plates at 23 nl using a Pintool station (Wako, San Diego, CA). The assay plates were incubated at room temperature for 10 min. Then 2 ul of NADPH regeneration solution was added to each well of the assay plates using an FRD and incubated at room temperature for 1 h. The reaction was stopped by adding 4 ul of detection reagent using an FRD and after 20 min incubation at room temperature the luminescence signal was measured using a ViewLux plate reader (Perkin Elmer, Shelton, CT). Data were expressed as relative luminescence units.

Comment: Disclaimer:

Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods. Alternative analysis methods and interpretations of the data are available at EPA (http://actor.epa.gov) and NTP (http://tools.niehs.nih.gov/cebs3/ui/).

Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: IucA Pilot Assay Tocris Library

Protocol: A solution containing 55.6 mM HEPES pH 7.5, 0.11% Tween 20, 16.7 mM MgCl2, 55.6 mM hydroxylamine, 55.6 microM ATP, 55.6 microM citrate, and 0.28 U/mL IPP was dispensed (45 microL) into clear polystyrene microplates (Corning, Inc.) using a BioTek MicroFlo dispenser.

Next, 40 nL of test compounds (10 mM in DMSO, 8 microM final concentration) were transferred from deep-well blocks to the reaction solution using a stainless-steel pin tool operated by a robotic workstation (JANUS, PerkinElmer, Waltham, MA). The IucA-catalyzed reaction was initiated by adding 5 microL of 3 microM IucA in 25 mM HEPES, 75 mM NaCl, and 0.1 mM TCEP at pH 7.5.

The reactions were allowed to proceed for 30 min at room temperature before being quenched by dispensing (microFill, BioTek) 13 microL of MG developing solution, containing 1.0 mg/mL MG oxalate, 1.5% (w/v) ammonium molybdate, 0.15% (v/v) Tween 20, and 4.7 N sulfuric acid. After allowing the assay color to develop/stabilize for 30 min, the absorbance at 620 nm was measured (EnVision 2103 Multilabel Microplate Reader, PerkinElmer).

Average positive controls from 24 wells with no test compound and average negative controls from 8 wells with no enzyme were calculated. Dynamic range was calculated by difference between Avg Pos Control and Avg Neg Control. Percent inhibition was calculated by the ratio of (Avg. Pos. Ctrl - Sample OD) to Dynamic Range.

Comment: Protein Target is
IucA

EMB09144
574 aa
G057_19877
Klebsiella pneumoniae hvKP1

Active compounds were defined by <80% activity at 8 microM screening concentration.

External ID: CHEMBL3782213

Protocol: N/A

Comment: Journal: Eur. J. Med. Chem.
Year: 2016
Volume: 114
First Page: 24
Last Page: 32
DOI: 10.1016/j.ejmech.2016.02.045

Target ChEMBL ID: CHEMBL399
ChEMBL Target Name: HeLa
ChEMBL Target Type: CELL-LINE - Target is a specific cell-line
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: s-my-keats_OPM1-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: CHEMBL3782212

Protocol: N/A

Comment: Journal: Eur. J. Med. Chem.
Year: 2016
Volume: 114
First Page: 24
Last Page: 32
DOI: 10.1016/j.ejmech.2016.02.045

Target ChEMBL ID: CHEMBL392
ChEMBL Target Name: A549
ChEMBL Target Type: CELL-LINE - Target is a specific cell-line
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: s-my-OC1MY5-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: CHEMBL3782211

Protocol: N/A

Comment: Journal: Eur. J. Med. Chem.
Year: 2016
Volume: 114
First Page: 24
Last Page: 32
DOI: 10.1016/j.ejmech.2016.02.045

Target ChEMBL ID: CHEMBL387
ChEMBL Target Name: MCF7
ChEMBL Target Type: CELL-LINE - Target is a specific cell-line
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL3782210

Protocol: N/A

Comment: Journal: Eur. J. Med. Chem.
Year: 2016
Volume: 114
First Page: 24
Last Page: 32
DOI: 10.1016/j.ejmech.2016.02.045

Target ChEMBL ID: CHEMBL3879801
ChEMBL Target Name: NON-PROTEIN TARGET
ChEMBL Target Type: NON-MOLECULAR - Target has not been defined at a molecular level, only the non-molecular entity which is affected (e.g., organism, cell line etc)
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL3782217

Protocol: N/A

Comment: Journal: Eur. J. Med. Chem.
Year: 2016
Volume: 114
First Page: 24
Last Page: 32
DOI: 10.1016/j.ejmech.2016.02.045

Target ChEMBL ID: CHEMBL387
ChEMBL Target Name: MCF7
ChEMBL Target Type: CELL-LINE - Target is a specific cell-line
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: s-my-KMS_34-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: CHEMBL3782216

Protocol: N/A

Comment: Journal: Eur. J. Med. Chem.
Year: 2016
Volume: 114
First Page: 24
Last Page: 32
DOI: 10.1016/j.ejmech.2016.02.045

Target ChEMBL ID: CHEMBL613289
ChEMBL Target Name: Hepatocyte
ChEMBL Target Type: CELL-LINE - Target is a specific cell-line
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: s-my-keats_L363-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: CHEMBL3782215

Protocol: N/A

Comment: Journal: Eur. J. Med. Chem.
Year: 2016
Volume: 114
First Page: 24
Last Page: 32
DOI: 10.1016/j.ejmech.2016.02.045

Target ChEMBL ID: CHEMBL387
ChEMBL Target Name: MCF7
ChEMBL Target Type: CELL-LINE - Target is a specific cell-line
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: s-my-keats_OCIMY7-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: CHEMBL3782214

Protocol: N/A

Comment: Journal: Eur. J. Med. Chem.
Year: 2016
Volume: 114
First Page: 24
Last Page: 32
DOI: 10.1016/j.ejmech.2016.02.045

Target ChEMBL ID: CHEMBL3879801
ChEMBL Target Name: NON-PROTEIN TARGET
ChEMBL Target Type: NON-MOLECULAR - Target has not been defined at a molecular level, only the non-molecular entity which is affected (e.g., organism, cell line etc)
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL3782221

Protocol: N/A

Comment: Journal: Eur. J. Med. Chem.
Year: 2016
Volume: 114
First Page: 24
Last Page: 32
DOI: 10.1016/j.ejmech.2016.02.045

Target ChEMBL ID: CHEMBL387
ChEMBL Target Name: MCF7
ChEMBL Target Type: CELL-LINE - Target is a specific cell-line
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL2060535

Protocol: N/A

Comment: Journal: Bioorg Med Chem Lett
Year: 2012
Volume: 22
Issue: 12
First Page: 4049
Last Page: 4054
DOI: 10.1016/j.bmcl.2012.04.081

External ID: s-my-MM1R-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.