External ID: CHEMBL746418

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J. Med. Chem.
Year: 1999
Volume: 42
Issue: 11
First Page: 1999
Last Page: 2006
DOI: 10.1021/jm9910019

Target ChEMBL ID: CHEMBL216
ChEMBL Target Name: Muscarinic acetylcholine receptor M1
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: H - Homologous protein target assigned
Confidence: Homologous single protein target assigned

External ID: SNCA-p-activity-luciferase

Protocol: PROTOCOL TABLE
SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE; DESCRIPTION

1; Cells; 4 uL; Dispense 1500 HEK-293-SNCA-luc cells/well into Greiner 1536-well white / solid bottom tissue culture treated plate. The plate was covered with metal lids with gas-exchange holes.
2; Incubate; 24 hours; Incubate at 37C, 5% CO2, 95% RH.
3; Compounds; 23 nL; Compounds and controls were transferred via a Kalypsys Pin Tool (Wako USA) equipped with a 1536-slotted pin array. The plate was covered with metal lids with gas-exchange holes.
4; Incubate; 24 hours; Incubate at 37C, 5% CO2, 95% RH.
5; Dispense; 1 uL; Dispense Gly-Phe-7-amino-4-trifluoromethylcoumarin (GF-AFC, prepared at 125 uM in PBS) was added. The plate was covered with metal lids with gas-exchange holes.
6; Incubate; 30 min; Incubate at 37C, 5% CO2.
7; Detector; Fluorescence; Measure fluorescence with ViewLux microplate reader (PerkinElmer) equipped with 405/10 excitation and 540/25 emission filters.
8; Dispense; 3 uL; Dispense ONE-Glo (PerkinElmer) lucifase detection reagent was added to each well. Plates were covered with metal lids with gas-exchange holes.
9; Incubate; 15 min; Incubate at room temperature.
10; Detector; Luminescence; Measure luminescence with ViewLux microplate reader (PerkinElmer) equipped with clear filters.

NOTES (numbers refer to sequence above)
1; HEK-293-SNCA-luc were cultured and suspended in phenol-red free DMEM (4.5 g/L glucose, 25 mM HEPES, cat #21063 (Thermo)).
3; Compounds were added to the assay plate in an 11-point intra plate dose response, 1:3 titration in DMSO with a final concentration range of xxx - yyy uM. Vehicle-only plates, with DMSO being pin-transferred to every well, were inserted at the beginning of screening runs to confirm expected assay performance. Activity was normalized to wells containing medium only (-100% activity, full inhibition) and SNCA-luc cells treated with DMSO vehicle control (0% activity), contained on the same plate as test samples.
10; Signals were analyzed, and dose-response curves were fit using the Hill equation. Compounds in curve classes -1.1, -1.2, -2.1, -2.2 in the SNCA-luc assay were considered active. Compounds were eliminated from further consideration if also active (curve class -1.1, -1.2, -1.3, -1.4, -2.1, -2.2, -2.3, -2.4) in the GF-AFC cytotoxicity assay.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: CHEMBL746423

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J. Med. Chem.
Year: 1997
Volume: 40
Issue: 8
First Page: 1230
Last Page: 1246
DOI: 10.1021/jm960467d

Target ChEMBL ID: CHEMBL3733
ChEMBL Target Name: Muscarinic acetylcholine receptor M1
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

External ID: CYP273

Protocol: Tox21 Assay Protocol Summary:

Two ul of enzyme-substrate mix was dispensed into medium binding white/solid 1536-well plates (Greiner Bio-One North America Inc., Monroe, NC) using a BioRaptr Flying Reagent Dispenser (FRD, Beckman Coulter, Brea, CA). Compounds dissolved in DMSO and positive control (furafyllline) were transferred to the assay plates at 23 nl using a Pintool station (Wako, San Diego, CA). The assay plates were incubated at room temperature for 10 min. Then 2 ul of NADPH regeneration solution was added to each well of the assay plates using an FRD and incubated at room temperature for 1 h. The reaction was stopped by adding 4 ul of detection reagent using an FRD and after 20 min incubation at room temperature the luminescence signal was measured using a ViewLux plate reader (Perkin Elmer, Shelton, CT). Data were expressed as relative luminescence units.

Comment: Disclaimer:

Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods. Alternative analysis methods and interpretations of the data are available at EPA (http://actor.epa.gov) and NTP (http://tools.niehs.nih.gov/cebs3/ui/).

Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: CHEMBL746421

Protocol: N/A

Comment: Journal: J. Med. Chem.
Year: 1999
Volume: 42
Issue: 11
First Page: 1999
Last Page: 2006
DOI: 10.1021/jm9910019

Target ChEMBL ID: CHEMBL216
ChEMBL Target Name: Muscarinic acetylcholine receptor M1
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: H - Homologous protein target assigned
Confidence: Homologous single protein target assigned

External ID: CHEMBL745520

Protocol: N/A

Comment: Journal: J. Med. Chem.
Year: 2003
Volume: 46
Issue: 20
First Page: 4273
Last Page: 4286
DOI: 10.1021/jm0301235

Target ChEMBL ID: CHEMBL245
ChEMBL Target Name: Muscarinic acetylcholine receptor M3
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: H - Homologous protein target assigned
Confidence: Homologous single protein target assigned

External ID: HMS1625

Protocol: The fix-reporter plasmid was conjugated into this strain which the stably integrates into the chromosome using the mini-Tn7 system (PMID: 15908923). This plasmid consists of the fixK promoter, which is a target of the fixLJ pathway driving expression of GFP.
The day before screen an overnight culture of B. multivorans strain VC7102, with fix reporter, is set up in tryptic soy broth (TSB) at 37 degrees C with shaking. The day of the screen the overnight culture is diluted 1:100 in fresh tryptic soy broth.
The day of the screen, 30 microL of tryptic soy broth (TSB) is pipetted into columns 1-22 of a 384-well plate (Corning 3764) using the Combi multidrop dispenser. To column 24, 30 microL of TSB containing 78 microM of Benserazide TSB is added for a positive control. To column 23, 30 microL of TSB containing with DMSO (0.078% v/v in TSB) is added for a negative control. 300 nL of each compound are pin-transferred to each plate. For every compound plate 2 replicate assay plates are set up. 30 microL of the 1:100 diluted-B. multivorans strain VC7102 is added to each well using the Combi. Initial OD600 and GFP are measured using the PerkinElmer EnVision. Plates are stacked 5 high, covered with lids and incubated at 37 degrees C overnight (~18 h).
The following day, assay plates are read using a PerkinElmer EnVision (600 nm filter and GFP).
Positive control: Benserazide 39 microM in column 24 (No positive control was used for plates 2089 & 2090; Plates 2091-2093: columns 1 & 24)
Negative control: DMSO 300 nL/well in column 23 (For plates 2089 & 2090 negative controls were located in columns 2 & 24; plates 2091-2093: columns 2 & 23)

Comment: Analysis method:
For each compound well, the initial GFP value was subtracted from overnight GFP value to calculate the deltaGFP. The mean and standard deviation of the negative control wells deltaGFP (column 23) on both replicate plates was calculated. Wells with replicate average deltaGFP at least 3 standard deviations above the plate negative control deltaGFP average were scored as potential positives.

To determine activity scores, Z-scores were calculated for each replicate separately based on the replicate negative control deltaGFP plate average and standard deviation. The replicate average deltaGFP Z-scores were used for activity scores, with activity score of 100 set to Z-score = 4 and activity score = 0 (no activity) set to Z-score = 0. Z-scores > 4 were considered activity score = 100, and Z-scores < 0 were considered activity score = 0.

External ID: CHEMBL746367

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J Med Chem
Year: 1998
Volume: 41
Issue: 14
First Page: 2524
Last Page: 2536
DOI: 10.1021/jm960683m

Target ChEMBL ID: CHEMBL245
ChEMBL Target Name: Muscarinic acetylcholine receptor M3
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: H - Homologous protein target assigned
Confidence: Homologous single protein target assigned

External ID: CHEMBL984889

Protocol: N/A

Comment: Journal: J. Med. Chem.
Year: 2009
Volume: 52
Issue: 9
First Page: 3084
Last Page: 3092
DOI: 10.1021/jm900025h

Target ChEMBL ID: CHEMBL376
ChEMBL Target Name: Rattus norvegicus
ChEMBL Target Type: ORGANISM - Target is a complete organism
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL746366

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J. Med. Chem.
Year: 1995
Volume: 38
Issue: 12
First Page: 2188
Last Page: 2195
DOI: 10.1021/jm00012a019

Target ChEMBL ID: CHEMBL245
ChEMBL Target Name: Muscarinic acetylcholine receptor M3
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: H - Homologous protein target assigned
Confidence: Homologous single protein target assigned

External ID: CHEMBL746514

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J. Med. Chem.
Year: 1997
Volume: 40
Issue: 26
First Page: 4265
Last Page: 4280
DOI: 10.1021/jm9702903

Target ChEMBL ID: CHEMBL245
ChEMBL Target Name: Muscarinic acetylcholine receptor M3
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: H - Homologous protein target assigned
Confidence: Homologous single protein target assigned

External ID: CHEMBL746518

Protocol: N/A

Comment: Journal: J. Med. Chem.
Year: 2000
Volume: 43
Issue: 13
First Page: 2514
Last Page: 2522
DOI: 10.1021/jm9904001

Target ChEMBL ID: CHEMBL245
ChEMBL Target Name: Muscarinic acetylcholine receptor M3
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: H - Homologous protein target assigned
Confidence: Homologous single protein target assigned

External ID: CHEMBL3367782

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: Bioorg. Med. Chem. Lett.
Year: 2014
Volume: 24
Issue: 15
First Page: 3255
Last Page: 3259
DOI: 10.1016/j.bmcl.2014.06.020

Target ChEMBL ID: CHEMBL216
ChEMBL Target Name: Muscarinic acetylcholine receptor M1
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

External ID: CHEMBL3367783

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: Bioorg. Med. Chem. Lett.
Year: 2014
Volume: 24
Issue: 15
First Page: 3255
Last Page: 3259
DOI: 10.1016/j.bmcl.2014.06.020

Target ChEMBL ID: CHEMBL211
ChEMBL Target Name: Muscarinic acetylcholine receptor M2
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

External ID: CHEMBL3367786

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: Bioorg. Med. Chem. Lett.
Year: 2014
Volume: 24
Issue: 15
First Page: 3255
Last Page: 3259
DOI: 10.1016/j.bmcl.2014.06.020

Target ChEMBL ID: CHEMBL2035
ChEMBL Target Name: Muscarinic acetylcholine receptor M5
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

External ID: CHEMBL3367784

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: Bioorg. Med. Chem. Lett.
Year: 2014
Volume: 24
Issue: 15
First Page: 3255
Last Page: 3259
DOI: 10.1016/j.bmcl.2014.06.020

Target ChEMBL ID: CHEMBL245
ChEMBL Target Name: Muscarinic acetylcholine receptor M3
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

External ID: CHEMBL3367785

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: Bioorg. Med. Chem. Lett.
Year: 2014
Volume: 24
Issue: 15
First Page: 3255
Last Page: 3259
DOI: 10.1016/j.bmcl.2014.06.020

Target ChEMBL ID: CHEMBL1821
ChEMBL Target Name: Muscarinic acetylcholine receptor M4
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

External ID: CHEMBL845472

Protocol: N/A

Comment: Journal: J. Med. Chem.
Year: 1986
Volume: 29
Issue: 9
First Page: 1610
Last Page: 1615
DOI: 10.1021/jm00159a009

External ID: APP-Toga-CHIKV-nsp2-p

Protocol: PROTOCOL TABLE (as described by Inglese J, Shamu CE and Guy RK. 2007)
SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE; DESCRIPTION.
1; Control / Compound; 20 nL; Echo 655 acoustic dispenser, Greiner 1536-well solid bottom black plate.
2; Enzyme; 4 uL; BioRAPTR FRD liquid dispenser (Beckman Coulter).
3; Incubation; 15 min; room temperature.
4; Reagent; 4 uL; 2.5 uM Peptide 2 substrate.
5; Incubation; 1 hr; room temperature.
6; Detection; Fluorescence; WiewLux microplate reader (PerkinElmer), 525 nm excitation, 598/25 nm emission.

NOTES (numbers refer to sequence numbers above).
1. Briefly, 20 nL DMSO, positive control ZnAc (20nM final concentration), and test compounds were transferred into a 1,536-well solid bottom black plate (789176-F, Greiner One) via Echo 655 acoustic dispenser (Beckman Coulter). For primary screens, compounds were tested at 7 concentrations, 1:3 dilution points ranging from 25 uM to 34 nM. Follow-up confirmatory screens were carried out at 11 concentrations, 1:3 dilution points from 25 uM to 0.42 nM.
2. Four uL nsP2pro enzyme mix (150 nM final concentration) in 10 mM Tris-HCl pH 8.0 with 0.01% Tween 20 assay buffer was dispensed into the plate using a BioRAPTR FRD liquid dispenser (Beckman Coulter).
3. The plate was incubated at room temperature (protected from light) for 15 min
4. Four microliter of peptide 2 substrate (2.5 uM final concentration) in assay buffer was added to the plate.
5. After 1 hour, plates were immediately read on a ViewLux high-throughput CCD imager (Exposure = 10 sec, Gain = High, Speed = Slow, Binning = 2X). The above assay was also incorporated in the NCATS HTS facility41, which allowed for robotic liquid and compound dispensing, microplate handling, and fluorescence reading..

REFERENCE:
Inglese J, Shamu CE and Guy RK, Reporting data from high throughput screening of small molecule libraries, Nature Chemical Biology, 2007, 3(8): 438-441. doi.org/10.1038/nchembio0807-438.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods [1].

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

Reference:
1. Inglese J, Auld DS, Jadhav A, et al. Quantitative high-throughput screening: a titration-based approach that efficiently identifies biological activities in large chemical libraries. Proc Natl Acad Sci U S A. 2006;103(31):11473-11478.

External ID: CHEMBL845474

Protocol: N/A

Comment: Journal: J. Med. Chem.
Year: 1988
Volume: 31
Issue: 1
First Page: 164
Last Page: 168
DOI: 10.1021/jm00396a025

External ID: CHEMBL852858

Protocol: N/A

Comment: Journal: J. Med. Chem.
Year: 1990
Volume: 33
Issue: 4
First Page: 1128
Last Page: 1138
DOI: 10.1021/jm00166a008

Target ChEMBL ID: CHEMBL1907609
ChEMBL Target Name: Muscarinic acetylcholine receptor
ChEMBL Target Type: PROTEIN FAMILY - Target is a group of closely related proteins
Relationship Type: H - Homologous protein target assigned
Confidence: Multiple homologous protein targets may be assigned

External ID: ERR513

Protocol: Tox21 Assay Protocol Summary:

The ERR cells were dispensed at 2,000 cells/5 ul/well in 1536-well white plates using a Multidrop dispenser. After the assay plates were incubated at a 37 C/5% CO2 incubator for 6 hours, 23 nL of compounds dissolved in DMSO, positive and negative controls or DMSO only was transferred to the assay plate by a pin tool. The plates were incubated at 37 C for 17.5 hours. 1 ul/well of CellTiter-Fluor reagent was added into the assay plates using a Flying Reagent Dispenser. After 30 min incubation at 37 C/5% CO2, the fluorescence intensity in the plates was measured using a ViewLux plate reader.

Comment: Disclaimer:

Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods. Alternative analysis methods and interpretations of the data are available at EPA (http://actor.epa.gov) and NTP (http://tools.niehs.nih.gov/cebs3/ui/).

Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: ERR845

Protocol: Tox21 Assay Protocol Summary:

The ERR cells were dispensed at 2,000 cells/5 ul/well in 1536-well white plates using a Multidrop dispenser. After the assay plates were incubated at a 37 C/5% CO2 incubator for 6 hours, 23 nL of compounds dissolved in DMSO, positive and negative controls or DMSO only was transferred to the assay plate by a pin tool. The plates were incubated at 37 C for 18 hours. 4 ul/well of One-Glo reagent was added into the assay plates using a Flying Reagent Dispenser. After 30 min incubation at room temperature, the luminescence intensity in the plates was measured using a ViewLux plate reader.

Comment: Disclaimer:

Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods. Alternative analysis methods and interpretations of the data are available at EPA (http://actor.epa.gov) and NTP (http://tools.niehs.nih.gov/cebs3/ui/).

Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: PGC981

Protocol: Tox21 Assay Protocol Summary:

The PGC/ERR cells were dispensed at 2,000 cells/5 ul/well in 1536-well white plates using a Multidrop dispenser. After the assay plates were incubated at a 37 C/5% CO2 incubator for 6 hours, 23 nL of compounds dissolved in DMSO, positive and negative controls or DMSO only was transferred to the assay plate by a pin tool. The plates were incubated at 37 C for 17.5 hours. 1 ul/well of CellTiter-Fluor reagent was added into the assay plates using a Flying Reagent Dispenser. After 30 min incubation at 37 C/5% CO2, the fluorescence intensity in the plates was measured using a ViewLux plate reader.

Comment: Disclaimer:

Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods. Alternative analysis methods and interpretations of the data are available at EPA (http://actor.epa.gov) and NTP (http://tools.niehs.nih.gov/cebs3/ui/).

Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: PGC428

Protocol: Assay Protocol Summary:

The PGC/ERR cells were dispensed at 2,000 cells/5 ul/well in 1536-well white plates using a Multidrop dispenser. After the assay plates were incubated at a 37 C/5% CO2 incubator for 6 hours, 23 nL of compounds dissolved in DMSO, positive and negative controls or DMSO only was transferred to the assay plate by a pin tool. The plates were incubated at 37 C for 18 hours. 4 ul/well of One-Glo reagent was added into the assay plates using a Flying Reagent Dispenser. After 30 min incubation at room temperature, the luminescence intensity in the plates was measured using a ViewLux plate reader.

Comment: Disclaimer:

Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods. Alternative analysis methods and interpretations of the data are available at EPA (http://actor.epa.gov) and NTP (http://tools.niehs.nih.gov/cebs3/ui/).

Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent activators are ranked higher than compounds that showed apparent inhibition.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.