External ID: CHEMBL1266185

Protocol: N/A

Comment: Journal: Nat Chem Biol
Year: 2007
Volume: 3
Issue: 5
First Page: 268
Last Page: 273
DOI: 10.1038/nchembio873

External ID: SNCA-p-activity-luciferase

Protocol: PROTOCOL TABLE
SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE; DESCRIPTION

1; Cells; 4 uL; Dispense 1500 HEK-293-SNCA-luc cells/well into Greiner 1536-well white / solid bottom tissue culture treated plate. The plate was covered with metal lids with gas-exchange holes.
2; Incubate; 24 hours; Incubate at 37C, 5% CO2, 95% RH.
3; Compounds; 23 nL; Compounds and controls were transferred via a Kalypsys Pin Tool (Wako USA) equipped with a 1536-slotted pin array. The plate was covered with metal lids with gas-exchange holes.
4; Incubate; 24 hours; Incubate at 37C, 5% CO2, 95% RH.
5; Dispense; 1 uL; Dispense Gly-Phe-7-amino-4-trifluoromethylcoumarin (GF-AFC, prepared at 125 uM in PBS) was added. The plate was covered with metal lids with gas-exchange holes.
6; Incubate; 30 min; Incubate at 37C, 5% CO2.
7; Detector; Fluorescence; Measure fluorescence with ViewLux microplate reader (PerkinElmer) equipped with 405/10 excitation and 540/25 emission filters.
8; Dispense; 3 uL; Dispense ONE-Glo (PerkinElmer) lucifase detection reagent was added to each well. Plates were covered with metal lids with gas-exchange holes.
9; Incubate; 15 min; Incubate at room temperature.
10; Detector; Luminescence; Measure luminescence with ViewLux microplate reader (PerkinElmer) equipped with clear filters.

NOTES (numbers refer to sequence above)
1; HEK-293-SNCA-luc were cultured and suspended in phenol-red free DMEM (4.5 g/L glucose, 25 mM HEPES, cat #21063 (Thermo)).
3; Compounds were added to the assay plate in an 11-point intra plate dose response, 1:3 titration in DMSO with a final concentration range of xxx - yyy uM. Vehicle-only plates, with DMSO being pin-transferred to every well, were inserted at the beginning of screening runs to confirm expected assay performance. Activity was normalized to wells containing medium only (-100% activity, full inhibition) and SNCA-luc cells treated with DMSO vehicle control (0% activity), contained on the same plate as test samples.
10; Signals were analyzed, and dose-response curves were fit using the Hill equation. Compounds in curve classes -1.1, -1.2, -2.1, -2.2 in the SNCA-luc assay were considered active. Compounds were eliminated from further consideration if also active (curve class -1.1, -1.2, -1.3, -1.4, -2.1, -2.2, -2.3, -2.4) in the GF-AFC cytotoxicity assay.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: CHEMBL3056854

Protocol: N/A

Comment: Journal: Med Chem Res
Year: 2007
Volume: 16
Issue: 7
First Page: 408
Last Page: 417
DOI: 10.1007/s00044-007-9060-5

External ID: CHEMBL4629675

Protocol: N/A

Comment: Journal: J Nat Prod
Year: 2020
Volume: 83
Issue: 5
First Page: 1541
Last Page: 1552
DOI: 10.1021/acs.jnatprod.0c00014

Target ChEMBL ID: CHEMBL3975
ChEMBL Target Name: Fructose-1,6-bisphosphatase
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

External ID: CHEMBL1070090

Protocol: N/A

Comment: Journal: Bioorg. Med. Chem.
Year: 2010
Volume: 18
Issue: 1
First Page: 222
Last Page: 228
DOI: 10.1016/j.bmc.2009.10.063

External ID: CHEMBL1070091

Protocol: N/A

Comment: Journal: Bioorg. Med. Chem.
Year: 2010
Volume: 18
Issue: 1
First Page: 222
Last Page: 228
DOI: 10.1016/j.bmc.2009.10.063

External ID: CHEMBL5382173

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J Med Chem
Year: 2023
Volume: 66
Issue: 4
First Page: 2257
Last Page: 2281
DOI: 10.1021/acs.jmedchem.2c01523

Target ChEMBL ID: CHEMBL3988629
ChEMBL Target Name: Casein kinase 2
ChEMBL Target Type: PROTEIN COMPLEX - Target is a defined protein complex, consisting of multiple subunits
Relationship Type: D - Direct protein target assigned
Confidence: Direct protein complex subunits assigned

External ID: CHEMBL4337638

Protocol: N/A

Comment: Journal: Eur J Med Chem
Year: 2019
Volume: 182
First Page: 111657
Last Page: 111657
DOI: 10.1016/j.ejmech.2019.111657

Target ChEMBL ID: CHEMBL5694
ChEMBL Target Name: DNA ligase 1
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

External ID: CHEMBL678656

Protocol: N/A

Comment: Journal: Bioorg. Med. Chem. Lett.
Year: 2000
Volume: 10
Issue: 17
First Page: 2033
Last Page: 2036
DOI: 10.1016/s0960-894x(00)00406-6

Target ChEMBL ID: CHEMBL354
ChEMBL Target Name: Escherichia coli
ChEMBL Target Type: ORGANISM - Target is a complete organism
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: BindingDB_8338_1

Protocol: N/A

Comment: Compounds with any of Ki, IC50, Kd, or EC50 activity value <= 10uM are labeled as "Active".
If multiple measurements are available for a given compound, it is labeled as "Active" if any of the measurements meet the criterion. Activity values are checked in the order of Ki, IC50, Kd, and EC50. The first entry that meets the above activity threshold is used to determine "Standard Type", "Standard Relation", and "PubChem Standard Value". Otherwise, the first non-empty entry will be used to set those values.

External ID: s-my-keats_OPM1-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: s-my-OC1MY5-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: CHEMBL1225535

Protocol: N/A

Comment: Journal: Bioorg. Med. Chem. Lett.
Year: 2010
Volume: 20
Issue: 18
First Page: 5510
Last Page: 5513
DOI: 10.1016/j.bmcl.2010.07.068

Target ChEMBL ID: CHEMBL3879801
ChEMBL Target Name: NON-PROTEIN TARGET
ChEMBL Target Type: NON-MOLECULAR - Target has not been defined at a molecular level, only the non-molecular entity which is affected (e.g., organism, cell line etc)
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: s-my-KMS_34-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: s-my-keats_L363-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: TargetID_659_CEMA

Protocol: Black, standard capacity streptavidin-coated 384-well plates (Pierce 15407) were first washed with 50 L of phosphate buffer (100 mM, pH 7.0; PB7) three times using a Biotek 405 ELX plate washer. Subsequently, 5 L of biotinylated pre-miRNA substrate (500 nM final) was dispensed into the plate using a Multidrop Combi Reagent Dispenser (Thermo Scientific). Plates were then centrifuged for 1 min at 1,000 RPM (223 g), sealed with plate tape, and incubated overnight at 4 C. The following morning, plates were washed three times with 50 L of PB7, followed by the addition of 5 L of Dicer digest buffer (20 mM Tris, 12 mM NaCl, 2.5 mM MgCl2, 1 mM fresh DTT, and 4.5% DMSO) and centrifugation. Compounds (50 nL of 5 mM DMSO stock, 25 M final) were then added into the sample wells using a Sciclone (Caliper) liquid handler with V&P pintool; the same volume of DMSO was added to the control wells. The plates were incubated at 25 C for 15 min before addition of 5 L of digest buffer containing 217 g/nL Dicer (108 g/mL Dicer, 5% glycerol and 0.01% Triton X-100 final, excess with respect to pre-miRNA). For the positive control wells, digest buffer without Dicer was added. The plates were centrifuged again and resealed before being placed in a 37 C incubator for 5 h. After Dicer cleavage, plates were washed three times with 50 L of PB7. mTet-HRP in PB7 (10 L, 750 nM final) was then dispensed into each well. The plates were subsequently centrifuged, sealed, and incubated at 25 C for 2 h. Plates were then washed three times with 50 L of wash buffer (2 mM imidazole, 260 mM NaCl, 0.5 mM EDTA, 0.1% Tween-20, pH 7.0), followed by washing three additional times with 50 L of PB7. Finally, SuperSignal West Pico (25 L; Pierce) was added, the plates were incubated at 25 C for 5 min, and chemiluminescence signal was detected using a PHERAstar plate reader using LUM plus module (BMG Labtech).

Comment: The activity outcome is based on a Z-score (number of standard deviations from the negative control mean) of 3 or higher on at least 50% times that the sample was screened.

For instance, if the sample was screened in n=4 runs, it would be considered active only if it had a Z-score of 3 or above in at least 2 runs.

External ID: s-my-keats_OCIMY7-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: s-my-MM1R-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: s-my-mm1s-m4-1

Protocol: SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Cells; 5 uL; white, solid bottom 1536-well Greiner assay plate.
2; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 48 hours; 37C incubation.
4; Reagent;5uL; CellTiter Glo (Promega).
5; Detector; 425V; Luminescence; Viewlux PerkinElmer.

NOTES (numbers refer to Sequence numbers above)
1. The cell-based screening methods employed in this study were like those previously published [1]. Briefly, the corresponding myeloma cell lines were screened in 1,536-well plates with 500 cells, 5-uL per well for inhibition of cell viability (assessed by measuring ATP levels with CellTiterGlo).
2. NCATS MIPE 4.0 library of approved and investigational drugs were added using the Kalypsis pin tool. Wells treated with DMSO only for 100% viability and media only for 0% viability were used as controls.
3. The assay plates were covered and incubated for 48 hours in a 37C, 5% CO2 incubator with controlled humidity.
4. After 48 hours, CellTilter-GloTM luminescent substrate mix (Promega) reagent was added to the assay plate and plates we incubated for 5 min at room temperature.
5. Signal was measured as median relative luminescence units on a ViewLux (PerkinElmer) multiplate reader.

Reference:
[1] Heske CM, Davis MI, Baumgart JT, Wilson K, Gormally MV, Chen L, Zhang X, Ceribelli M, Duveau DY, Guha R, Ferrer M, Arnaldez FI, Ji J, Tran HL, Zhang Y, Mendoza A, Helman LJ, Thomas CJ. Matrix Screen Identifies Synergistic Combination of PARP Inhibitors and Nicotinamide Phosphoribosyltransferase (NAMPT) Inhibitors in Ewing Sarcoma. Clin Cancer Res. 2017 Dec 1;23(23):7301-7311. doi: 10.1158/1078-0432.CCR-17-1121. Epub 2017 Sep 12. PMID: 28899971; PMCID: PMC6636827.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.