External ID: DSHEA-v1-PXR-antagonist-CTF

Protocol: For PXR luciferase reporter gene assays, we used hPXR-LucHepG2cells provided by Dr. Taosheng Chen (Department of Chemical Biology and Therapeutics, St. Jude Children's Research Hospital). Cells were cultured in EMEM supplemented with 10% fetal bovine serum, 100U/mL penicillin and 100ug/mL streptomycin, and 500ug/mL of geneticin.

PROTOCOL TABLE (as described by Inglese J, Shamu CE and Guy RK. 2007) [1]
SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE; DESCRIPTION.
1; Cells; 5 uL; hPXR-LucHepG2; white solid-bottom Greiner plate.
2; Incubation; 5h; 37C, 95% humidity, 5% CO2
3; Compounds and control; 23 nL; Kalypsis pintool (Wako USA).
4; Reagent; 1uL; rifampicin (RIF) in the antagonist mode.
5; Incubation; 24 hr; 37C, 5% CO2.
6; Reagent; 1 uL; CellTiter-Fluor detection reagent.
7; Incubation; 1 hr; 37C, 5% CO2.
8; Read; Fluorescence; ViewLux plate reader.
9; Reagent; 4 uL; ONE-Glo Luciferase detection reagent.
10; Incubation; 30 min; room temperature.
11; Read; Luminescence; ViewLux plate reader.

NOTES (numbers refer to Sequence numbers above)
1. Briefly, 5uL of hPXR-LucHepG2 cells in phenol red-free DMEM containing 5% charcoal-stripped FBS, 1 mM sodium pyruvate (Invitrogen), 2 mM L-glutamine (Invitrogen), and 100 U/mL penicillin and 100ug/mL streptomycin were dispensed using a BioRAPTR FRD at 4 x 105cells/mL (2000cells/well) in tissue culture-treated 1536-well white assay plates (GreinerBio-One).
2. Plates were incubated for 5h at 37C, 95% humidity, and 5% CO2 to allow for cell attachment.
3. Compounds (final concentration for most substances ranged from 15.6 nM to 45.9uM), positive SPA70 (final concentration range of 2.8 nM to 92uM for the antagonist mode), and cytotoxicity control tetraoctyl ammonium bromide (final concentration of 92uM) were transferred (23 nL) via pintool (Wako Automation).
4-5. After compound transfer, plates were dispensed with 1uL of RIF (final concentration of 2uM) in the antagonist mode, using a BioRAPTR FRD and incubated for 24 h at 37C and 5% CO2.
6-8. Following incubation, 1uL of CellTiter-Fluor (Promega, Madison, Wisconsin) was added using a BioRAPTR FRD, after which all plates were incubated (37C/ 5% CO2) for1 h and then measured for fluorescence intensity (Ex/Em= 405/540 nm) on a ViewLux plate reader to determine cell viability.
9-11. Directly after this fluorescence reading, 4uL of ONE-Glo Luciferasere agent (Promega) was added to each well using the BioRAPTR FRD, followed by a 30 min incubation (RT) and read for luminescence intensity on a ViewLux detector.

REFERENCES:
[1] Inglese J, Shamu CE and Guy RK, Reporting data from high throughput screening of small molecule libraries, Nature Chemical Biology, 2007, 3(8): 438-441. doi.org/10.1038/nchembio0807-438.
[2] Lin W, Wu J, Dong H, Bouck D, Zeng FY, Chen T. Cyclin-dependent kinase 2 negatively regulates human pregnane X receptor-mediated CYP3A4 gene expression in HepG2 liver carcinoma cells. J Biol Chem. 2008 Nov 7;283(45):30650-7. doi: 10.1074/jbc.M806132200. Epub 2008 Sep 9. PMID: 18784074; PMCID: PMC2662154.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent antagonists are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: DSHEA-v1-PXR-antagonist-ONEGlo

Protocol: For PXR luciferase reporter gene assays, we used hPXR-LucHepG2cells provided by Dr. Taosheng Chen (Department of Chemical Biology and Therapeutics, St. Jude Children's Research Hospital). Cells were cultured in EMEM supplemented with 10% fetal bovine serum, 100U/mL penicillin and 100ug/mL streptomycin, and 500ug/mL of geneticin.

PROTOCOL TABLE (as described by Inglese J, Shamu CE and Guy RK. 2007) [1]
SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE; DESCRIPTION.
1; Cells; 5 uL; hPXR-LucHepG2; white solid-bottom Greiner plate.
2; Incubation; 5h; 37C, 95% humidity, 5% CO2
3; Compounds and control; 23 nL; Kalypsis pintool (Wako USA).
4; Reagent; 1uL; rifampicin (RIF) in the antagonist mode.
5; Incubation; 24 hr; 37C, 5% CO2.
6; Reagent; 1 uL; CellTiter-Fluor detection reagent.
7; Incubation; 1 hr; 37C, 5% CO2.
8; Read; Fluorescence; ViewLux plate reader.
9; Reagent; 4 uL; ONE-Glo Luciferase detection reagent.
10; Incubation; 30 min; room temperature.
11; Read; Luminescence; ViewLux plate reader.

NOTES (numbers refer to Sequence numbers above)
1. Briefly, 5uL of hPXR-LucHepG2 cells in phenol red-free DMEM containing 5% charcoal-stripped FBS, 1 mM sodium pyruvate (Invitrogen), 2 mM L-glutamine (Invitrogen), and 100 U/mL penicillin and 100ug/mL streptomycin were dispensed using a BioRAPTR FRD at 4 x 105cells/mL (2000cells/well) in tissue culture-treated 1536-well white assay plates (GreinerBio-One).
2. Plates were incubated for 5h at 37C, 95% humidity, and 5% CO2 to allow for cell attachment.
3. Compounds (final concentration for most substances ranged from 15.6 nM to 45.9uM), positive SPA70 (final concentration range of 2.8 nM to 92uM for the antagonist mode), and cytotoxicity control tetraoctyl ammonium bromide (final concentration of 92uM) were transferred (23 nL) via pintool (Wako Automation).
4-5. After compound transfer, plates were dispensed with 1uL of RIF (final concentration of 2uM) in the antagonist mode, using a BioRAPTR FRD and incubated for 24 h at 37C and 5% CO2.
6-8. Following incubation, 1uL of CellTiter-Fluor (Promega, Madison, Wisconsin) was added using a BioRAPTR FRD, after which all plates were incubated (37C/ 5% CO2) for1 h and then measured for fluorescence intensity (Ex/Em= 405/540 nm) on a ViewLux plate reader to determine cell viability.
9-11. Directly after this fluorescence reading, 4uL of ONE-Glo Luciferasere agent (Promega) was added to each well using the BioRAPTR FRD, followed by a 30 min incubation (RT) and read for luminescence intensity on a ViewLux detector.

REFERENCES:
[1] Inglese J, Shamu CE and Guy RK, Reporting data from high throughput screening of small molecule libraries, Nature Chemical Biology, 2007, 3(8): 438-441. doi.org/10.1038/nchembio0807-438.
[2] Lin W, Wu J, Dong H, Bouck D, Zeng FY, Chen T. Cyclin-dependent kinase 2 negatively regulates human pregnane X receptor-mediated CYP3A4 gene expression in HepG2 liver carcinoma cells. J Biol Chem. 2008 Nov 7;283(45):30650-7. doi: 10.1074/jbc.M806132200. Epub 2008 Sep 9. PMID: 18784074; PMCID: PMC2662154.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent antagonists are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: CHEMBL1028474

Protocol: N/A

Comment: Journal: J. Nat. Prod.
Year: 1981
Volume: 44
Issue: 2
First Page: 215
Last Page: 220
DOI: 10.1021/np50014a012

Target ChEMBL ID: CHEMBL613250
ChEMBL Target Name: Phytophthora cactorum
ChEMBL Target Type: ORGANISM - Target is a complete organism
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: DSHEA-v1-HepG2-viability-CTG-ATP

Protocol: PROTOCOL TABLE (as described by Inglese J, Shamu CE and Guy RK. 2007)
SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE; DESCRIPTION.
1; Cells; 5 uL; HepG2 cells, white solid-bottom tissue treated Greiner plate.
2; Incubation; 4 hrs; 37C, 95% humidity, 5% CO2.
3; Compounds; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
4; Incubation; 24 hrs; 37C, 95% humidity, 5% CO2.
5; Reagent; 1 uL; GF-AFC substrate.
6; Incubation; 30 min; 37C, 95% humidity, 5% CO2.
7; Read 1; Fluorescence; EnVision plate reader excitation 380 nm, emission 510 nm.
8; Reagent; 3 uL; CellTiter-Glo (Promega).
9; Centrifuge; 1000 RPM; 15 seconds.
10; Incubation; 30 min; room temperature.
11; Read 2; Luminescence; ViewLux plate reader.

NOTES (numbers refer to Sequence numbers above)
1. 5 uL of HepG2 cells at 2 x 105 cells/mL (1,000 cells/well) were dispensed into a 1536-well white solid-bottom tissue treated plate (Greiner Bio-One) using a Multidrop Combi dispenser (Thermo Scientific). This assay use both GF-AFC substrate and Cell-Titer Glo (CTG), measuring cellular protease activity and ATP content, respectively.
2. Plates were incubated at 37C, 95% humidity, and 5% CO2 for ~4 hours to allow for cell attachment.
3. Compounds were transferred (16 nL) via pintool (Wako Automation), for a final concentration range for most substances of 15.6 nM - 31.3 uM.
4. Plates were incubated for ~24 hours.
5. 1 uL addition of GF-AFC substrate (final concentration 25 uM; MP Biomedicals).
6. Plates were incubated at 37C, 95% humidity, and 5% CO2 for 30 minutes.
7. After incubation, plates were read for fluorescence intensity (Ex/Em = 380 nm/510 nm) on an EnVision detector (PerkinElmer, Shelton, Connecticut).
8. Once the detection for fluorescence was completed, plates were dispensed with 3 uL of CellTiter-Glo (Promega, Madison, WI).
9. Plates were centrifuged for 15 seconds at 1,000 RPM's.
10. Plates were incubated for 30 minutes at room temperature.
11. Plates were then read for luminescence intensity on a ViewLux detector.

REFERENCES:
Inglese J, Shamu CE and Guy RK, Reporting data from high throughput screening of small molecule libraries, Nature Chemical Biology, 2007, 3(8): 438-441. doi.org/10.1038/nchembio0807-438.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: CHEMBL3817701

Protocol: N/A

Comment: Journal: J Nat Prod
Year: 2016
Volume: 79
Issue: 3
First Page: 470
Last Page: 476
DOI: 10.1021/acs.jnatprod.5b00858

Target ChEMBL ID: CHEMBL352
ChEMBL Target Name: Staphylococcus aureus
ChEMBL Target Type: ORGANISM - Target is a complete organism
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL3817700

Protocol: N/A

Comment: Journal: J. Nat. Prod.
Year: 2016
Volume: 79
Issue: 3
First Page: 470
Last Page: 476
DOI: 10.1021/acs.jnatprod.5b00858

Target ChEMBL ID: CHEMBL352
ChEMBL Target Name: Staphylococcus aureus
ChEMBL Target Type: ORGANISM - Target is a complete organism
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: DSHEA-v1-PXR-agonist-ONEGlo

Protocol: For PXR luciferase reporter gene assays, we used hPXR-LucHepG2cells provided by Dr. Taosheng Chen (Department of Chemical Biology and Therapeutics, St. Jude Children's Research Hospital). Cells were cultured in EMEM supplemented with 10% fetal bovine serum, 100U/mL penicillin and 100ug/mL streptomycin, and 500ug/mL of geneticin.

PROTOCOL TABLE (as described by Inglese J, Shamu CE and Guy RK. 2007) [1]
SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE; DESCRIPTION.
1; Cells; 5 uL; hPXR-LucHepG2; white solid-bottom Greiner plate.
2; Incubation; 5h; 37C, 95% humidity, 5% CO2
3; Compounds and control; 23 nL; Kalypsis pintool (Wako USA).
4; Reagent; 1uL; rifampicin (RIF) in the antagonist mode.
5; Incubation; 24 hr; 37C, 5% CO2.
6; Reagent; 1 uL; CellTiter-Fluor detection reagent.
7; Incubation; 1 hr; 37C, 5% CO2.
8; Read; Fluorescence; ViewLux plate reader.
9; Reagent; 4 uL; ONE-Glo Luciferase detection reagent.
10; Incubation; 30 min; room temperature.
11; Read; Luminescence; ViewLux plate reader.

NOTES (numbers refer to Sequence numbers above)
1. Briefly, 5uL of hPXR-LucHepG2 cells in phenol red-free DMEM containing 5% charcoal-stripped FBS, 1 mM sodium pyruvate (Invitrogen), 2 mM L-glutamine (Invitrogen), and 100 U/mL penicillin and 100ug/mL streptomycin were dispensed using a BioRAPTR FRD at 4 x 105cells/mL (2000cells/well) in tissue culture-treated 1536-well white assay plates (GreinerBio-One).
2. Plates were incubated for 5h at 37C, 95% humidity, and 5% CO2 to allow for cell attachment.
3. Compounds (final concentration for most substances ranged from 15.6 nM to 45.9uM), positive control rifampicin (RIF; final concentration range of 2.8 nM to 92uM for the agonist mode), and cytotoxicity control tetraoctyl ammonium bromide (final concentration of 92uM) were transferred (23 nL) via pintool (Wako Automation).
4-5. After compound transfer, plates were dispensed with 1uL of the media in the agonist mode using a BioRAPTR FRD and incubated for 24 h at 37C and 5% CO2.
6-8. Following incubation, 1uL of CellTiter-Fluor (Promega, Madison, Wisconsin) was added using a BioRAPTR FRD, after which all plates were incubated (37C/ 5% CO2) for1 h and then measured for fluorescence intensity (Ex/Em= 405/540 nm) on a ViewLux plate reader to determine cell viability.
9-11. Directly after this fluorescence reading, 4uL of ONE-Glo Luciferasere agent (Promega) was added to each well using the BioRAPTR FRD, followed by a 30 min incubation (RT) and read for luminescence intensity on a ViewLux detector.

REFERENCES:
[1] Inglese J, Shamu CE and Guy RK, Reporting data from high throughput screening of small molecule libraries, Nature Chemical Biology, 2007, 3(8): 438-441. doi.org/10.1038/nchembio0807-438.
[2] Lin W, Wu J, Dong H, Bouck D, Zeng FY, Chen T. Cyclin-dependent kinase 2 negatively regulates human pregnane X receptor-mediated CYP3A4 gene expression in HepG2 liver carcinoma cells. J Biol Chem. 2008 Nov 7;283(45):30650-7. doi: 10.1074/jbc.M806132200. Epub 2008 Sep 9. PMID: 18784074; PMCID: PMC2662154.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent agonists are ranked higher than compounds that showed apparent antagonists.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = 1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 1.2 || ratio.curve_class == 2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds also have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: CHEMBL3817699

Protocol: N/A

Comment: Journal: J. Nat. Prod.
Year: 2016
Volume: 79
Issue: 3
First Page: 470
Last Page: 476
DOI: 10.1021/acs.jnatprod.5b00858

Target ChEMBL ID: CHEMBL352
ChEMBL Target Name: Staphylococcus aureus
ChEMBL Target Type: ORGANISM - Target is a complete organism
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: DSHEA-v1-PXR-agonist-CTF

Protocol: For PXR luciferase reporter gene assays, we used hPXR-LucHepG2cells provided by Dr. Taosheng Chen (Department of Chemical Biology and Therapeutics, St. Jude Children's Research Hospital). Cells were cultured in EMEM supplemented with 10% fetal bovine serum, 100U/mL penicillin and 100ug/mL streptomycin, and 500ug/mL of geneticin.

PROTOCOL TABLE (as described by Inglese J, Shamu CE and Guy RK. 2007) [1]
SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE; DESCRIPTION.
1; Cells; 5 uL; hPXR-LucHepG2; white solid-bottom Greiner plate.
2; Incubation; 5h; 37C, 95% humidity, 5% CO2
3; Compounds and control; 23 nL; Kalypsis pintool (Wako USA).
4; Reagent; 1uL; rifampicin (RIF) in the antagonist mode.
5; Incubation; 24 hr; 37C, 5% CO2.
6; Reagent; 1 uL; CellTiter-Fluor detection reagent.
7; Incubation; 1 hr; 37C, 5% CO2.
8; Read; Fluorescence; ViewLux plate reader.
9; Reagent; 4 uL; ONE-Glo Luciferase detection reagent.
10; Incubation; 30 min; room temperature.
11; Read; Luminescence; ViewLux plate reader.

NOTES (numbers refer to Sequence numbers above)
1. Briefly, 5uL of hPXR-LucHepG2 cells in phenol red-free DMEM containing 5% charcoal-stripped FBS, 1 mM sodium pyruvate (Invitrogen), 2 mM L-glutamine (Invitrogen), and 100 U/mL penicillin and 100ug/mL streptomycin were dispensed using a BioRAPTR FRD at 4 x 105cells/mL (2000cells/well) in tissue culture-treated 1536-well white assay plates (GreinerBio-One).
2. Plates were incubated for 5h at 37C, 95% humidity, and 5% CO2 to allow for cell attachment.
3. Compounds (final concentration for most substances ranged from 15.6 nM to 45.9muM), positive control rifampicin (RIF; final concentration range of 2.8 nM to 92muM for the agonist mode), and cytotoxicity control tetraoctyl ammonium bromide (final concentration of 92muM) were transferred (23 nL) via pintool (Wako Automation).
4-5. After compound transfer, plates were dispensed with 1muL of the media in the agonist mode using a BioRAPTR FRD and incubated for approximately 24 h at 37 degrees C and 5% CO2.
6-8. Following incubation, 1uL of CellTiter-Fluor (Promega, Madison, Wisconsin) was added using a BioRAPTR FRD, after which all plates were incubated (37C/ 5% CO2) for 1 h and then measured for fluorescence intensity (Ex/Em= 405/540 nm) on a ViewLux plate reader to determine cell viability.
9-11. Directly after this fluorescence reading, 4uL of ONE-Glo Luciferasere agent (Promega) was added to each well using the BioRAPTR FRD, followed by a 30 min incubation (RT) and read for luminescence intensity on a ViewLux detector.

REFERENCES:
[1] Inglese J, Shamu CE and Guy RK, Reporting data from high throughput screening of small molecule libraries, Nature Chemical Biology, 2007, 3(8): 438-441. doi.org/10.1038/nchembio0807-438.
[2] Lin W, Wu J, Dong H, Bouck D, Zeng FY, Chen T. Cyclin-dependent kinase 2 negatively regulates human pregnane X receptor-mediated CYP3A4 gene expression in HepG2 liver carcinoma cells. J Biol Chem. 2008 Nov 7;283(45):30650-7. doi: 10.1074/jbc.M806132200. Epub 2008 Sep 9. PMID: 18784074; PMCID: PMC2662154.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent agonists are ranked higher than compounds that showed apparent antagonist.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = 1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 1.2 || ratio.curve_class == 2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds also have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: CHEMBL3817698

Protocol: N/A

Comment: Journal: J. Nat. Prod.
Year: 2016
Volume: 79
Issue: 3
First Page: 470
Last Page: 476
DOI: 10.1021/acs.jnatprod.5b00858

Target ChEMBL ID: CHEMBL352
ChEMBL Target Name: Staphylococcus aureus
ChEMBL Target Type: ORGANISM - Target is a complete organism
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL3817703

Protocol: N/A

Comment: Journal: J. Nat. Prod.
Year: 2016
Volume: 79
Issue: 3
First Page: 470
Last Page: 476
DOI: 10.1021/acs.jnatprod.5b00858

Target ChEMBL ID: CHEMBL352
ChEMBL Target Name: Staphylococcus aureus
ChEMBL Target Type: ORGANISM - Target is a complete organism
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL3817702

Protocol: N/A

Comment: Journal: J. Nat. Prod.
Year: 2016
Volume: 79
Issue: 3
First Page: 470
Last Page: 476
DOI: 10.1021/acs.jnatprod.5b00858

Target ChEMBL ID: CHEMBL352
ChEMBL Target Name: Staphylococcus aureus
ChEMBL Target Type: ORGANISM - Target is a complete organism
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: CHEMBL1028475

Protocol: N/A

Comment: Journal: J. Nat. Prod.
Year: 1981
Volume: 44
Issue: 2
First Page: 215
Last Page: 220
DOI: 10.1021/np50014a012

Target ChEMBL ID: CHEMBL613250
ChEMBL Target Name: Phytophthora cactorum
ChEMBL Target Type: ORGANISM - Target is a complete organism
Relationship Type: N - Non-molecular target assigned
Confidence: Target assigned is non-molecular

External ID: DSHEA-v1-KB-8-5-11-CTG

Protocol: PROTOCOL TABLE (as described by Inglese J, Shamu CE and Guy RK. 2007)
SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE; DESCRIPTION.
1; Cells; 5 uL; KB-8-5-11 cells, white solid-bottom tissue treated Greiner plate.
2; Incubation; 4 hrs; 37C, 95% humidity, 5% CO2.
3; Compounds and control; 23 nL; Kalypsis pin tool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
4; Incubation; 72 hrs; 37C, 95% humidity, 5% CO2.
5; Reagent; 2.5 uL; CellTiter-Glo.
6; Centrifuge; 1000 RPM; 15 seconds.
7; Incubation; 30 min; room temperature.
8; Read; Luminescence; ViewLux plate reader.

NOTES (numbers refer to Sequence numbers above)
1. P-gp-overexpressing subline KB-8-5-11 were maintained in DMEM (Thermofisher catalog #11965) with 10% FBS and 1% penicillin/streptomycin at 37C in 5% CO2. For KB-8-5-11 cells, colchicine was added to the medium at a concentration of 100 ng/ml (after initial cell attachment). For the screen, assay medium was identical to culture medium except for KB-8-5-11, where colchicine was excluded from the medium. Briefly, 5 uL of cells at 1 x 105 cells/mL (500 cells/well) were dispensed into a 1536-well white solid-bottom tissue treated plate (Greiner Bio-One) using a Multidrop Combi dispenser.
2. Plates were incubated at 37C, 95% humidity, 5% CO2 for ~4 hours to allow for cell attachment.
3. Compounds and intraplate control (Bortezomib; final concentration range 228 pM - 7.5 uM) were transferred (16 nL) via pintool (Wako Automation), for a final concentration of 15.6 nM - 30.0 uM (most substances).
4. Plates were incubated for ~72 hours at 37C, 95% humidity, 5% CO2.
5. Plates were then dispensed with 2.5 uL of CellTiter-Glo.
6. The assay plates were centrifuged for 15 seconds at 1,000 RPM's.
7. The plates were incubated for 30-minute at room temperature.
8. Luminescence intensity was detected using a PerkinElmer ViewLux microplate reader.

REFERENCES:
Inglese J, Shamu CE and Guy RK, Reporting data from high throughput screening of small molecule libraries, Nature Chemical Biology, 2007, 3(8): 438-441. doi.org/10.1038/nchembio0807-438.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent cytotoxic compounds (inhibition of viability) are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.
3. In addition, activity in the P-gp counter screens is defined as a sample yielding a CRC of -1.1, -1.2, -2.1, or -2.2 in the KB-3-1 assay and selective (or potentially interacting with P-gp) if it has an IC50 ratio of >5 vs KB-8-5-11 (if activity was observed).

External ID: DSHEA-v1-cyp1a2

Protocol: PROTOCOL TABLE (as described by Inglese J, Shamu CE and Guy RK. 2007)
SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE; DESCRIPTION.
1; Reagent; 2 uL; cytochrome P450 enzyme and luciferin substrate or buffer only, white solid-bottom Greiner plate.
2; Compounds and control; 16 nL; Kalypsis pintool (Wako USA) equipped with a 1536-well pin head to transfer to the assay plates.
3; Incubation; 15 min; room temperature.
4; Reagent; 2 uL; nicotinamide adenine dinucleotide phosphate (NADPH).
5; Incubation; 30 - 45 min; room temperature in the dark.
6; Reagent; 4 uL; P450-Glo assay detection reagent.
7; Centrifuge; 1000 RPM; 15 seconds.
8; Incubation; 30 min; room temperature.
9; Read; Luminescence; ViewLux plate reader.

NOTES (numbers refer to Sequence numbers above)
1. A 2 uL mixture of corresponding enzymes and luciferin substrate (final concentrations CYP enzyme-specific and pro-luciferin substrate-specific) or minus-enzyme (assay buffer conditions supplied by the manufacturer for respective enzyme isoform; typically, 100 mM KPO4) and luciferin substrate were dispensed using a BioRAPTR FRD (Beckman Coulter, Brea, CA) into columns of a 1536-well white solid-bottom medium binding plate (Greiner Bio-One, Monroe, NC). Five isoforms of cytochrome P450 were used (CYP1A2, CYP2C9, CYP2C19, CYP2D6, and CYP3A4).
2. Substances (final concentrations of most substances ranged from 19.5 nM to 39.8 uM) and controls (CYP-specific) were transferred (16 nL) via pintool (Wako Automation, Richmond, VA). Intraplate controls furafylline (CYP1A2), sulfaphenazole (CYP2C9), ketoconazole (CYP2C19), quinidine (CYP2D6), and ketoconazole (CYP3A4) were used correspondingly.
3. Assay plates were incubated at room temperature for 15 min.
4-5. Two uL of reduced nicotinamide adenine dinucleotide phosphate (NADPH) regeneration solution (final concentration 1x) was dispensed to initiate the reaction, which then proceeded for 30-45 min (RT, protected from light), allowing NADP+ to convert to NADPH, which then serves as the electron source for the CYP oxidative reactions leading to the pro-luciferin substrate to convert to D-luciferin.
6-8. Next, 4 uL of reconstituted luciferin detection reagent was dispensed to allow for D-luciferin to be converted to light via luciferase reaction. Samples were centrifuged for 15 s at 1000 rpm (233 g) to remove bubbles, followed by an RT incubation for 30 min.
9. Plates were then read for luminescence intensity on a ViewLux detector (PerkinElmer; Waltham, MA).

REFERENCES:
Inglese J, Shamu CE and Guy RK, Reporting data from high throughput screening of small molecule libraries, Nature Chemical Biology, 2007, 3(8): 438-441. doi.org/10.1038/nchembio0807-438.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent inhibitors are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: DSHEA-v1-counterscreen-LDR

Protocol: PROTOCOL TABLE (as described by Inglese J, Shamu CE and Guy RK. 2007) [1]
SEQUENCE No. (e.g., 1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE; DESCRIPTION.
1; Reagent; 4 uL; D-luciferin or buffer only, white solid-bottom Greiner plate.
2; Compounds and control; 16 nL; Kalypsis pintool (Wako USA).
3; Incubation; 15 min; room temperature.
4; Reagent; 4 uL; luciferin detection reagent.
5; Centrifuge; 1000 RPM; 15 sec.
6; Incubation; 30 min; room temperature.
7; Read; Luminescence; ViewLux plate reader.

NOTES (numbers refer to Sequence numbers above)
1. To account for detection kit artifacts, compounds were counter-screened for interferences using previously described methods [2]. Briefly, 4 uL of D-luciferin (final concentration 1 uM) or buffer (100 mM potassium phosphate) were dispensed into a 1536-well white solid-bottom medium binding plate.
2-3. Compounds (final concentration of 19.5 nM to 39.8 uM) and intraplate control PTC124 (final concentration range: 1.2 nM to 39.8 uM) were transferred (16 nL) via pintool (Wako Automation) and incubated (RT) for 15 min.
4-6. Next, 4 uL of reconstituted luciferin detection reagent was dispensed, and samples were centrifuged for 15 s at 1000 rpm and incubated (RT) for 30 min.
7. Plates were then read for luminescence intensity on a ViewLux detector.

REFERENCES:
[1] Inglese J, Shamu CE and Guy RK, Reporting data from high throughput screening of small molecule libraries, Nature Chemical Biology, 2007, 3(8): 438-441. doi.org/10.1038/nchembio0807-438.
[2] Auld DS, Southall NT, Jadhav A, Johnson RL, Diller DJ, Simeonov A, Austin CP, Inglese J. Characterization of chemical libraries for luciferase inhibitory activity. J Med Chem. 2008 Apr 24;51(8):2372-86. doi: 10.1021/jm701302v. Epub 2008 Mar 26. PMID: 18363348.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent inhibitors are ranked higher than compounds that showed no activity.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.