External ID: CHEMBL3294258

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J. Med. Chem.
Year: 2014
Volume: 57
Issue: 11
First Page: 4454
Last Page: 4465
DOI: 10.1021/jm401431x

Target ChEMBL ID: CHEMBL1881
ChEMBL Target Name: Prostanoid EP2 receptor
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

External ID: SERCaMPGLuc-p1-antagonist

Protocol: PROTOCOL TABLES
SEQUENCE No. (1, 2, 3, etc.); PARAMETER (e.g., Cells, Incubation, Reagent, etc.); VALUE and DESCRIPTION.
1; Reagent; 5 uL; 1000 SH-SY5Y cells per wells
2; Time; 5 hour; 37C, 5% CO2
3; Compound; 23 nL; Control inhibitor / compound library
4; Time; 16 hour; 37C, 5% CO2
5; Reagent; 100 nM; Thapsigargin
6; Time; 4 hour; 37C, 5% CO2
7; Reagent; 1 uL; 0.5x coelenterazine
8; Detection; Luminescence; ViewLux imaging system

NOTES (numbers refer to sequence above)
1; SH-SY5Y human neuroblastoma cells stably expressing GLuc-SERCaMP (SH-SY5Y-GLuc-ASARTDL) cells were seeded in 1,536 well white tissue culture treated plates (Corning, Cat# 7464) in DMEM-high glucose-sodium pyruvate (ThermoFisher Scientific, Cat #10569) supplemented with 10% bovine growth serum (Hyclone), 10 U/ml penicillin (Gibco), 10 ug/ml streptomycin (Gibco), and 20 mM HEPES.
2; Assay plates were incubated for 5 hour at 37C in a humidified incubator containing 5% CO2.
3; qHTS libraries (23 nl, final concentrations of 1.53 uM, 7.67 uM, 38.3 uM) or controls (neutral control: DMSO, positive control: dantrolene) were added using a Kalypsis pin-tool Robotic System equipped with 1536 pinheads.
4; Cells were then incubated for 16 hours at 37C, 5% CO2.
5; Thapsigargin was added at 100 nM to deplete ER calcium stores.
6; Cells were incubated for 4 hour (37oC, 5% CO2)
7; Gaussia luciferase in the medium was measured by adding 1 ul of 0.5x coelenterazine (final concentration 0.07x) prepared in Gaussia Luciferase Glow Assay Buffer (Pierce), without addition of the Cell Lysis Buffer Reagent.
8; Luminescence was measured using a ViewLux high-432 throughput CCD imaging system (Perkin Elmer) equipped with clear filters. Compounds exhibiting inhibitory activity (defined as curve class -1.1, -1.2, -1.3, -1.4, -2.1, -2.2, -2.3, -2.4, -3) were identified by normalizing plate-wise to corresponding intra-plate controls (neutral control = Tg only; positive control (100% inhibition) = DMSO vehicle) with percent activity derived using in-house software (https://tripod.nih.gov/curvefit). The same controls were also used for the calculation of the Z' factor, a measure of assay quality control, as previously described (Zhang et al., 1999). For the initial validation of activity in the SERCaMP assays, hits from the primary screen were assayed again at 11-concentrations (1.3 nM - 76.6 uM). SH-SY5Y-GLuc-SERCaMP cells were assayed for ER Ca2+ depletion as outlined above.

Reference:
1. Zhang, J.H., Chung, T.D., and Oldenburg, K.R. (1999). A Simple Statistical Parameter for Use in Evaluation and Validation of High Throughput Screening Assays. J Biomol Screen 4, 67-73.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: CHEMBL3293989

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J. Med. Chem.
Year: 2014
Volume: 57
Issue: 11
First Page: 4454
Last Page: 4465
DOI: 10.1021/jm401431x

Target ChEMBL ID: CHEMBL3710
ChEMBL Target Name: Prostanoid EP3 receptor
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

External ID: CHEMBL3294259

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J. Med. Chem.
Year: 2014
Volume: 57
Issue: 11
First Page: 4454
Last Page: 4465
DOI: 10.1021/jm401431x

Target ChEMBL ID: CHEMBL1811
ChEMBL Target Name: Prostanoid EP1 receptor
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

External ID: CHEMBL3293991

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J. Med. Chem.
Year: 2014
Volume: 57
Issue: 11
First Page: 4454
Last Page: 4465
DOI: 10.1021/jm401431x

Target ChEMBL ID: CHEMBL4427
ChEMBL Target Name: Prostanoid DP receptor
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

External ID: CHEMBL3293990

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J. Med. Chem.
Year: 2014
Volume: 57
Issue: 11
First Page: 4454
Last Page: 4465
DOI: 10.1021/jm401431x

Target ChEMBL ID: CHEMBL1836
ChEMBL Target Name: Prostanoid EP4 receptor
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

External ID: CHEMBL3293993

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J. Med. Chem.
Year: 2014
Volume: 57
Issue: 11
First Page: 4454
Last Page: 4465
DOI: 10.1021/jm401431x

Target ChEMBL ID: CHEMBL1881
ChEMBL Target Name: Prostanoid EP2 receptor
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

External ID: CHEMBL3293992

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J. Med. Chem.
Year: 2014
Volume: 57
Issue: 11
First Page: 4454
Last Page: 4465
DOI: 10.1021/jm401431x

Target ChEMBL ID: CHEMBL1995
ChEMBL Target Name: Prostanoid IP receptor
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

External ID: TDP1100

Protocol: DT40-hTDP1 cells without 20 nM Camptothecin (add 20 microL of DMSO in 1 L of cell culture medium) were dispensed at 400 cells/5microL/well in tissue culture treated 1536-well white wall/solid bottom assay plates (Greiner Bio-One North America, NC, U.S.A.) using a Multidrop Combi 8 channel dispenser (Thermo Fisher, Waltham, MA, USA). 23 nL compounds and controls were transferred using the pin tool (Kalypsys, San Diego, CA, USA) to the assay plates. The assay plates were then incubated at 37 masculineC for a minimum 48 hr. Three microL of Cell Titer Glo solution was added to the plates and incubated at RT in dark for 30 min. Luminescence was read using ViewLux (Perkin Elmer) with 1 sec exposure slow speed, high gain and 2x binning.

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: TDP1101

Protocol: DT40-hTDP1 cells with 20 nM Camptothecin (add 20 microL of 1 mM CPT stock in 1 L of cell culture medium) were dispensed at 400 cells/5microL/well in tissue culture treated 1536-well white wall/solid bottom assay plates (Greiner Bio-One North America, NC, U.S.A.) using a Multidrop Combi 8 channel dispenser (Thermo Fisher, Waltham, MA, USA). 23 nL compounds and controls were transferred using the pin tool (Kalypsys, San Diego, CA, USA) to the assay plates. The assay plates were then incubated at 37 masculineC for a minimum 48 hr. Three microL of Cell Titer Glo solution was added to the plates and incubated at RT in dark for 30 min. Luminescence was read using ViewLux (Perkin Elmer) with 1 sec exposure slow speed, high gain and 2x binning.

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: HMS1315

Protocol: Cybrid cells were washed with PBS, trypsinized, spun down at 300g for 5 minutes, and resuspended in 10 mLs of PBS. Cells were counted, and the appropriate amount of cells were added to a vial containing DMEM (No Glucose) + 2%FBS + 1% P/S + 10mM Galactose, DMEM (No Glucose) + 2%FBS + 1% P/S + 10mM Galactose + 0.3% DMSO, DMEM No Glucose + 2% FBS + 1% P/S + 10mM Galactose + 1uM I-BET GSK 525762A, or DMEM (No Glucose) + 2%FBS + 1% P/S + 10mM Galactose + 1.25mM Glucose. Cells were then seeded in a Corning 3570 384-well plate (40 ul/well,1500 cells/well). Two replicates were prepared as described at the same time per library plate.

100 nl of compound was added to each well via pin transfer immediately after seeding. After the addition of compound, cells were incubated for 72 hours at 37 degrees C with 5% CO2.

Following the 72 hour incubation period, the 384 well plates were centrifuged for 1 minute at 1000 rpm. The media was aspirated using an aspiration wand and fresh media DMEM only, was added to the cells (40uL/ well) using a well-mate. Fifteen-microliters of Cell Titer Glow substrate was then added to each well using the well-mate. The plates were gently vortexed for 10 seconds and then centrifuged for 1 minute at 1000 rpm. The plates were then immediately read on the Envision instrument and the luminescence was detected for each individual well.

Positive control (strong): Cells seeded in DMEM (No Glucose) + 2%FBS + 1% P/S + 10mM Galactose + 1.25mM Glucose
Positive control (weak): Cells seeded in DMEM No Glucose + 2% FBS + 1% P/S + 10mM Galactose + 1uM I-BET GSK 525762A
Negative control: Cells seeded in DMEM (No Glucose) + 2%FBS + 1% P/S + 10mM Galactose + 0.3% DMSO

Comment: Data analysis method and criteria for scoring active compounds:

Z-scores were calculated for both replicates separately using the plate average and standard deviation of experimental well luminescence (Z = (x - mu)/sigma). Compounds were considered active if both replicate Z-scores >= 1.8. Activity scores were determined by scaling replicate average Z-scores from 0 (activity score = 0) to 4 (activity score = 100), with activity score > 45 being considered active. Z-scores < 0 were set to activity score = 0; Z-scores > 4 were set to activity score = 100 (100% activity).

External ID: CHEMBL4808151

Protocol: N/A

Comment: Target ChEMBL ID: CHEMBL1865
ChEMBL Target Name: Histone deacetylase 6
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

Data Source: Fraunhofer Institute HDAC6 screening

External ID: CHEMBL4495582

Protocol: N/A

Comment: Target ChEMBL ID: CHEMBL4523582
ChEMBL Target Name: Replicase polyprotein 1ab
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

Data Source: SARS-CoV-2 Screening Data

External ID: IucA Pilot Assay Tocris Library

Protocol: A solution containing 55.6 mM HEPES pH 7.5, 0.11% Tween 20, 16.7 mM MgCl2, 55.6 mM hydroxylamine, 55.6 microM ATP, 55.6 microM citrate, and 0.28 U/mL IPP was dispensed (45 microL) into clear polystyrene microplates (Corning, Inc.) using a BioTek MicroFlo dispenser.

Next, 40 nL of test compounds (10 mM in DMSO, 8 microM final concentration) were transferred from deep-well blocks to the reaction solution using a stainless-steel pin tool operated by a robotic workstation (JANUS, PerkinElmer, Waltham, MA). The IucA-catalyzed reaction was initiated by adding 5 microL of 3 microM IucA in 25 mM HEPES, 75 mM NaCl, and 0.1 mM TCEP at pH 7.5.

The reactions were allowed to proceed for 30 min at room temperature before being quenched by dispensing (microFill, BioTek) 13 microL of MG developing solution, containing 1.0 mg/mL MG oxalate, 1.5% (w/v) ammonium molybdate, 0.15% (v/v) Tween 20, and 4.7 N sulfuric acid. After allowing the assay color to develop/stabilize for 30 min, the absorbance at 620 nm was measured (EnVision 2103 Multilabel Microplate Reader, PerkinElmer).

Average positive controls from 24 wells with no test compound and average negative controls from 8 wells with no enzyme were calculated. Dynamic range was calculated by difference between Avg Pos Control and Avg Neg Control. Percent inhibition was calculated by the ratio of (Avg. Pos. Ctrl - Sample OD) to Dynamic Range.

Comment: Protein Target is
IucA

EMB09144
574 aa
G057_19877
Klebsiella pneumoniae hvKP1

Active compounds were defined by <80% activity at 8 microM screening concentration.

External ID: 341_Human

Protocol: The International Union of Basic and Clinical Pharmacology/British Pharmacological Society (IUPHAR/BPS) Guide to PHARMACOLOGY Database (GtoPdb) uses expert subcommittees to collate peer-reviewed information from the published literature regarding individual protein targets, and describes the pharmacology, genetics, function and anatomy of each target. Its pages provide a richly curated overview of the pharmacology of receptors, ion channels, enzymes and other target types, which can be found by following the external link to the GtoPdb website.

Comment: The data collected focuses on ligands at human receptors. Data are provided at rat or mouse orthologues where there are significant species differences, or where data are not yet available at the human target.

Information on individual experimental protocols can be found in the primary references listed for each ligand.

Affinity data are expressed as pKi [-log(Ki)], pKd [-log(Kd)], pIC50 [-log(IC50)], pEC50 [-log(EC50)], pKB [-log(KB)], pA2 or as a micromolar concentration range. In most cases the original concentration can be found in the primary reference.

External ID: VIFG001

Protocol: 5 uL of 700 cells/well of A3G-YFP cells are dispensed into black, clear bottom plates. The plates are incubated overnight at 37 deg C. 23 nL of compounds are added by pintool. The plates are incubated overnight at 37 deg C and then read on the TTP Acumen (Ex 488/ Em 500-530).

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: 7124-01_Inhibitor_SinglePoint_HTS_Activity

Protocol:
Protocol:
1) Plate 10 uL BL2-NFkB-luc cells at 12.5K cells/well, using a Multidrop Combi reagent dispenser (1,250 cells/uL).
2) Add 25 nL compound or positive control, by pin transfer; IKK inhibitor VII will be used at 50 uM.
3) Incubate at 37 masculineC for 1 hour (allowing compounds to enter cells for action).
4) Add 5 uL 192 ng/mL tCD40L per well for a final concentration of 64 ng/ml using a Thermo Multidrop Combi.
5) Incubate at 37 masculineC for 4 hrs, then leave plate at RT for 30 minutes.
6) Add 15 uL SteadyGlo luciferase substrate (Promega) per well using a Thermo Multidrop Combi.
7) Incubate at RT for 5min, then read Luminescence using LJL Analyst HT plate reader.

Comment: PRESENCE OF CONTROLS: Neutral control wells (NC) and positive control wells (PC) were included on every plate.

EXPECTED OUTCOME: Active compounds result in decreasing readout signal.

NORMALIZATION:
The raw signals of the plate wells were normalized using the 'Neutral Controls Minus Inhibitors' method in Genedata Assay Analyzer (v10.0.2):
The median raw signal of the intraplate neutral control wells was set to a normalized activity value of 0.
The median raw signal of the intraplate positive control wells was set to a normalized activity value of -100.
Experimental wells values were scaled to this range.

PATTERN CORRECTION: No plate pattern correction algorithm from Genedata Condoseo (v.10.0.2) was applied.

PUBCHEM_ACTIVITY_SCORE:
This was set as equal to the mean of the normalized sample replicate activities, rounded to the nearest integer .
The minimum PUBCHEM_ACTIVITY_SCORE required for a compound to be called a hit (the activity threshold, or AT) was set at -50.

PERCENTAGE OF ACTIVE REPLICATES:
For each sample, the percentage of replicates (PCT_ACTIVE_REP) which had activity scores >= AT was determined.
The minimum percentage of replicates required for a compound to be called a hit (PAR_T) was set at 55.

PUBCHEM_ACTIVITY_OUTCOME:
Samples passing BOTH threshold criteria were assigned an outcome of 2 (active):
PUBCHEM_ACTIVITY_SCORE >= AT, and PCT_ACTIVE_REP >= PAR_T

Samples passing NEITHER threshold criteria were assigned an outcome of 1 (inactive):
PUBCHEM_ACTIVITY_SCORE < AT, and PCT_ACTIVE_REP < PAR_T

Samples passing AT only were assigned an outcome of 1 (inactive) :
PUBCHEM_ACTIVITY_SCORE >= AT, and PCT_ACTIVE_REP < PAR_T

Samples passing PAR_T only were assigned an outcome of 1 (inactive) :
PUBCHEM_ACTIVITY_SCORE < AT, and PCT_ACTIVE_REP >= PAR_T

External ID: CHEMBL4808149

Protocol: N/A

Comment: Target ChEMBL ID: CHEMBL1865
ChEMBL Target Name: Histone deacetylase 6
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

Data Source: Fraunhofer Institute HDAC6 screening

External ID: 2125-01_Inhibitor_SinglePoint_HTS_Activity

Protocol: Protocol:
PRC2 activity was measured using Dissociation-Enhanced Lanthanide Fluoro-ImmunoAssays (DELFIA) performed on 384-well, white, streptavidin-coated plates (PerkinElmer). In short, PRC2 was diluted to 30 ng and 3 ng per well in 20 uL 2X Enzyme Buffer (50mM Tris HCl pH 8.5, 10 mM DTT, 5 mM MgCl). Compounds were pinned at 100 nL per well and reactions were initiated with 20 uL of a 5 uM SAM (NEB) solution containing 600 nM H3[21-44]-GK-biotin (AnaSpec; PRC2).

Plates were incubated at room temperature for 1 hr and then washed three times with 100 uL of Wash Buffer (50mM Tris pH 7.4, 150 mM NaCl, 0.05% Tween 20, 0.2% BSA). 50 ul of Fluoroimmunoassay (FI) Buffer (50 mM Tris HCl pH 7.8, 150 mM NaCl, 0.05% Tween 40, 25 iM DTPA, 0.2% BSA, 0.05% BGG)containing a 1:4000 dilution of anti-H3K27me2 rabbit IgG (Cell Signaling, #9728) with 691 ng/mL Eu-N1-anti-rabbit IgG (PerkinElmer)was added to each well for PRC2 reactions.

Following 1 hr incubation at room temperature, the plates were washed three times with Wash Buffer and 50 uL of Enhancement Solution (PerkinElmer) was added to each well. Plates were incubated for 30 min at room temperature and time-resolved fluorescence (TRF) was measured on Wallac Envision 2104 Multilabel Reader (400 us window, 400 us delay, 320 excitation, 615 emission).

Comment: PRESENCE OF CONTROLS: Neutral control wells (NC) and positive control wells (PC) were included on every plate.

EXPECTED OUTCOME: Active compounds result in decreasing readout signal.

NORMALIZATION:
The raw signals of the plate wells were normalized using the 'Neutral Controls Minus Inhibitors' method in Genedata Assay Analyzer (v7.0.3):
The median raw signal of the intraplate neutral control wells was set to a normalized activity value of 0.
The median raw signal of the intraplate positive control wells was set to a normalized activity value of -100.
Experimental wells values were scaled to this range.
All well activities were then multiplied by -1 to create a positive activity readout value range, to match Pubchem convention.

PATTERN CORRECTION: No plate pattern correction algorithm from Genedata Condoseo (v.7.0.3) was applied.

PUBCHEM_ACTIVITY_SCORE:
This was set as equal to the mean of the normalized sample replicate activities, rounded to the nearest integer .
The minimum PUBCHEM_ACTIVITY_SCORE required for a compound to be called a hit (the activity threshold, or AT) was set at 50.

PERCENTAGE OF ACTIVE REPLICATES:
For each sample, the percentage of replicates (PCT_ACTIVE_REP) which had activity scores >= AT was determined.
The minimum percentage of replicates required for a compound to be called a hit (PAR_T) was set at 100.

PUBCHEM_ACTIVITY_OUTCOME:
Samples passing BOTH threshold criteria were assigned an outcome of 2 (active):
PUBCHEM_ACTIVITY_SCORE >= AT, and PCT_ACTIVE_REP >= PAR_T

Samples passing NEITHER threshold criteria were assigned an outcome of 1 (inactive):
PUBCHEM_ACTIVITY_SCORE < AT, and PCT_ACTIVE_REP < PAR_T

Samples passing AT only were assigned an outcome of 3 (inconclusive) :
PUBCHEM_ACTIVITY_SCORE >= AT, and PCT_ACTIVE_REP < PAR_T

Samples passing PAR_T only were assigned an outcome of 1 (inactive) :
PUBCHEM_ACTIVITY_SCORE < AT, and PCT_ACTIVE_REP >= PAR_T

External ID: CHEMBL4808150

Protocol: N/A

Comment: Target ChEMBL ID: CHEMBL1865
ChEMBL Target Name: Histone deacetylase 6
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

Data Source: Fraunhofer Institute HDAC6 screening

External ID: HMS1482

Protocol: Prior to screening, cells were passaged in high glucose DMEM supplemented with 10% FBS, 1% P/S, 1 mM pyruvate, and HEPES. Media was changed every 1-2 days to prevent starvation and maintain cellular health.

On the day of screening, 384-well plates (Corning 3765) were filled with 30 uL of control cybrid cell suspension (33.3 cells/ul). Media for resuspension was DMEM supplemented with 10% FBS, 1% P/S, 1 mM pyruvate, and HEPES. Positive control columns were 23 and 24 for most plate setups. Initially, tunicamycin (15 nM) and galactose media (10 mM + 1 mM glucosamine) were used in columns 23 and 24, respectively. Over the course of the screen, galactose was substituted with Vidofludimus (11 uM). Next, 33 nL of each compound were pin-transferred to each plate in duplicate. Final assay well volume was 30 uL. Plates were stacked 2 high, covered with lids, and incubated at 37 degrees C for 2 days.

After 2 days of incubation, Hoescht (10 ul/well) was added to assay plates and fluorescence was read using the Acumen laser scanning cytometer. After, the bottom of plates were sealed with two layers of Brightmax Sealing Films. Then Promega NanoGlo Live cell reagent (20 ul/well) was added to each well and luminescence was read on a PerkinElmer EnVision plate reader after 5 minute of shaking.

Comment: Data analysis method and criteria for scoring active compounds:

Normalized luminescence values (luminescence / cell number) for each replicate were calculated (based on average of 2 luminescence reads per replicate). Z-scores were calculated using the plate average and standard deviation of experimental well normalized values. Each plate replicate was individually analyzed to measure reproducibility across plates. Z-scores were then averaged across replicates and a Z-score threshold of 1.96 was selected for positive hits, indicating increased mitochondrial supercomplex formation. Wells were excluded from further consideration based on low cell number (1 or both replicates with number of objects count < 1500). Activity scores were determined by scaling Z-scores from 0 (activity score = 0) to 4 (activity score = 100), with activity score > 50 being considered active. Z-scores < 0 were set to activity score = 0; Z-scores > 4 were set to activity score = 100 (100% activity).

External ID: 341_Rat

Protocol: The International Union of Basic and Clinical Pharmacology/British Pharmacological Society (IUPHAR/BPS) Guide to PHARMACOLOGY Database (GtoPdb) uses expert subcommittees to collate peer-reviewed information from the published literature regarding individual protein targets, and describes the pharmacology, genetics, function and anatomy of each target. Its pages provide a richly curated overview of the pharmacology of receptors, ion channels, enzymes and other target types, which can be found by following the external link to the GtoPdb website.

Comment: The data collected focuses on ligands at human receptors. Data are provided at rat or mouse orthologues where there are significant species differences, or where data are not yet available at the human target.

Information on individual experimental protocols can be found in the primary references listed for each ligand.

Affinity data are expressed as pKi [-log(Ki)], pKd [-log(Kd)], pIC50 [-log(IC50)], pEC50 [-log(EC50)], pKB [-log(KB)], pA2 or as a micromolar concentration range. In most cases the original concentration can be found in the primary reference.

External ID: 338_Human

Protocol: The International Union of Basic and Clinical Pharmacology/British Pharmacological Society (IUPHAR/BPS) Guide to PHARMACOLOGY Database (GtoPdb) uses expert subcommittees to collate peer-reviewed information from the published literature regarding individual protein targets, and describes the pharmacology, genetics, function and anatomy of each target. Its pages provide a richly curated overview of the pharmacology of receptors, ion channels, enzymes and other target types, which can be found by following the external link to the GtoPdb website.

Comment: The data collected focuses on ligands at human receptors. Data are provided at rat or mouse orthologues where there are significant species differences, or where data are not yet available at the human target.

Information on individual experimental protocols can be found in the primary references listed for each ligand.

Affinity data are expressed as pKi [-log(Ki)], pKd [-log(Kd)], pIC50 [-log(IC50)], pEC50 [-log(EC50)], pKB [-log(KB)], pA2 or as a micromolar concentration range. In most cases the original concentration can be found in the primary reference.

External ID: VSVM-OFFLINE

Protocol: Two uL of HEK293 cell suspension are dispensed at 1000 cells/well into solid white 1536-well plates (Grenier) using a Multidrop Combi (Thermo Scientific). After addition of 23 nL compound by a pin tool (Kalypsys), the plate is incubated 1 h at 37 degrees C and then 3 uL of virus 1:100 dilution VSV-MARV is added. After 28 hr, 4 uL of assay reagent is added and the plates are read using a ViewLux (Perkin Elmer). Assays are performed in sub-saturating amounts of virus (MOI <0.5), therefore luciferase signals reflect the amount (titer) of virus able to infect the cells in presence of the compound.

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: VSVL-OFFLINE

Protocol: For screening, 1000 cells in 2 ul/well were dispensed into white solid 1536-well plates (Greiner) using a solenoid-based dispenser. Following transfer of 23nl compound or DMSO vehicle by a pin tool, 3 ul/well of VSV-LV was added. The plates were centrifuged 1 min at 1000 RPM and then incubated 16 hr at 37 C and 5% CO2. After addition of 4 ul/well SteadyLite (PerkinElmer) detection reagent, the plates were incubated 10 min at ambient temperature and luminescence was measured on a ViewLux (Perkin Elmer) plate reader.

Keywords: NIH Roadmap, MLPCN, MLI, MLSMR, qHTS, NCGC, Lassa virus, luciferase, cell assay, infection

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: epac1-activator-v

Protocol: Briefly, three uL of reagents (100 nM EPAC1, 250 nM RAP1B-BODIPY-GDP, 50 uM GDP) were dispensed into a 1536-well Greiner black solid-bottom medium binding assay plate. Controls and test compounds (23 nL) were transferred to the plate via a Kalypsys pin tool equipped with a 1536-pin array. The plates were centrifuged at 1,000 rpm for 15 seconds followed by 5 minute incubation at room temperature. The assay plates were read at 5 minute intervals for 30 minutes in the ViewLux plate reader using 480nm excitation and 540nm emission filters. The results were normalized to the agonist positive control of 6.5 mM cAMP.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent activators are ranked higher than compounds that showed apparent inhibition.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = 1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 1.2 || ratio.curve_class == 2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds also have PUBCHEM_ACTIVITY_SCORE between 1 and 39.