External ID: TDP1100

Protocol: DT40-hTDP1 cells without 20 nM Camptothecin (add 20 microL of DMSO in 1 L of cell culture medium) were dispensed at 400 cells/5microL/well in tissue culture treated 1536-well white wall/solid bottom assay plates (Greiner Bio-One North America, NC, U.S.A.) using a Multidrop Combi 8 channel dispenser (Thermo Fisher, Waltham, MA, USA). 23 nL compounds and controls were transferred using the pin tool (Kalypsys, San Diego, CA, USA) to the assay plates. The assay plates were then incubated at 37 masculineC for a minimum 48 hr. Three microL of Cell Titer Glo solution was added to the plates and incubated at RT in dark for 30 min. Luminescence was read using ViewLux (Perkin Elmer) with 1 sec exposure slow speed, high gain and 2x binning.

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: TDP1101

Protocol: DT40-hTDP1 cells with 20 nM Camptothecin (add 20 microL of 1 mM CPT stock in 1 L of cell culture medium) were dispensed at 400 cells/5microL/well in tissue culture treated 1536-well white wall/solid bottom assay plates (Greiner Bio-One North America, NC, U.S.A.) using a Multidrop Combi 8 channel dispenser (Thermo Fisher, Waltham, MA, USA). 23 nL compounds and controls were transferred using the pin tool (Kalypsys, San Diego, CA, USA) to the assay plates. The assay plates were then incubated at 37 masculineC for a minimum 48 hr. Three microL of Cell Titer Glo solution was added to the plates and incubated at RT in dark for 30 min. Luminescence was read using ViewLux (Perkin Elmer) with 1 sec exposure slow speed, high gain and 2x binning.

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: HMS979

Protocol: Cation-adjusted Mueller Hinton II broth supplemented with 0.005% Tween-80 was inoculated with a single colony of S. aureus RN4220. Following overnight incubation, the culture was diluted 1:100 into fresh medium, and incubation was continued until the bacterial suspension reached an optical density at 600 nm (OD600) of 0.6, corresponding to a bacterial density of 5 x 10E8 colony forming units (CFU)/mL. An aliquot of this culture was diluted 1:400 with fresh medium and stored on ice until use. Assay plates were prepared for compound transfer in quadruplicate to enable screening of compounds at two temperatures in duplicate. The plate layout was as follows: wells in columns 1-22 were loaded with culture medium at 25 microL/well; wells in column 23 contained the screening negative control (medium only); wells in column 24 contained the screening positive control (medium containing 25 microg/mL chloramphenicol). 300 nL of experimental compounds were transferred by stainless steel pin array from library plate to assay plates.

25 microL of the bacterial suspension was added to each assay well. Assay plates were incubated at 42 degrees C in humidified chambers (humidity > 85%). After 20 h, the OD600 was measured using a plate reader in absorbance mode.

Comment: Data analysis description:

Absorbance values at 42 degrees C and 30 degrees C for each replicate were normalized to positive and negative control plate average absorbance, and replicate normalized values were averaged to calculate an average relative absorbance at both temperatures. A substance was considered a temperature-dependent positive at 42 degrees C if average relative absorbance <= 50 and the difference between relative absorbance at 30 degrees C and 42 degrees C >= 20 (relative absorbance 30 degrees C - relative absorbance 42 degrees C >= 20). A substance was considered a temperature-independent positive if relative absorbance at both 30 degrees C and 42 degrees C < 10.

Activity scores were calculated using average relative absorbance at both temperatures. Average relative absorbance <= 0 was scored as 100 for activity; average relative absorbance >= 100 was scored as 0 for activityy. Average relative absorbance between 0 and 100 was subtracted from 100 to generate activity scores for intermediate values (i.e. average relative absorbance = 40 corresponds to an activity score of 60).

Note that since this is treated as a panel assay, the query for active compounds includes many that were considered active at both temperatures. The final Pubchem activity score is the activity score at 42 degrees C, and compounds scored as active (PUBCHEM_ACTIVITY_OUTCOME = 2) include both temperature-dependent and temperature-independent active substances.

External ID: CHEMBL679569

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J. Med. Chem.
Year: 2002
Volume: 45
Issue: 19
First Page: 4188
Last Page: 4201
DOI: 10.1021/jm020839k

Target ChEMBL ID: CHEMBL1907607
ChEMBL Target Name: GABA-A receptor; anion channel
ChEMBL Target Type: PROTEIN COMPLEX GROUP - Target is a poorly defined protein complex, where subunit composition is unclear (e.g., GABA-A receptor)
Relationship Type: D - Direct protein target assigned
Confidence: Multiple direct protein targets may be assigned

External ID: VIFG001

Protocol: 5 uL of 700 cells/well of A3G-YFP cells are dispensed into black, clear bottom plates. The plates are incubated overnight at 37 deg C. 23 nL of compounds are added by pintool. The plates are incubated overnight at 37 deg C and then read on the TTP Acumen (Ex 488/ Em 500-530).

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: TargetID_659_CEMA

Protocol: Black, standard capacity streptavidin-coated 384-well plates (Pierce 15407) were first washed with 50 L of phosphate buffer (100 mM, pH 7.0; PB7) three times using a Biotek 405 ELX plate washer. Subsequently, 5 L of biotinylated pre-miRNA substrate (500 nM final) was dispensed into the plate using a Multidrop Combi Reagent Dispenser (Thermo Scientific). Plates were then centrifuged for 1 min at 1,000 RPM (223 g), sealed with plate tape, and incubated overnight at 4 C. The following morning, plates were washed three times with 50 L of PB7, followed by the addition of 5 L of Dicer digest buffer (20 mM Tris, 12 mM NaCl, 2.5 mM MgCl2, 1 mM fresh DTT, and 4.5% DMSO) and centrifugation. Compounds (50 nL of 5 mM DMSO stock, 25 M final) were then added into the sample wells using a Sciclone (Caliper) liquid handler with V&P pintool; the same volume of DMSO was added to the control wells. The plates were incubated at 25 C for 15 min before addition of 5 L of digest buffer containing 217 g/nL Dicer (108 g/mL Dicer, 5% glycerol and 0.01% Triton X-100 final, excess with respect to pre-miRNA). For the positive control wells, digest buffer without Dicer was added. The plates were centrifuged again and resealed before being placed in a 37 C incubator for 5 h. After Dicer cleavage, plates were washed three times with 50 L of PB7. mTet-HRP in PB7 (10 L, 750 nM final) was then dispensed into each well. The plates were subsequently centrifuged, sealed, and incubated at 25 C for 2 h. Plates were then washed three times with 50 L of wash buffer (2 mM imidazole, 260 mM NaCl, 0.5 mM EDTA, 0.1% Tween-20, pH 7.0), followed by washing three additional times with 50 L of PB7. Finally, SuperSignal West Pico (25 L; Pierce) was added, the plates were incubated at 25 C for 5 min, and chemiluminescence signal was detected using a PHERAstar plate reader using LUM plus module (BMG Labtech).

Comment: The activity outcome is based on a Z-score (number of standard deviations from the negative control mean) of 3 or higher on at least 50% times that the sample was screened.

For instance, if the sample was screened in n=4 runs, it would be considered active only if it had a Z-score of 3 or above in at least 2 runs.

External ID: HMS1303

Protocol: Prior to screening, lyophilized FITC-GIV peptide (a.a. 1671-1701) is dissolved in 100% DMSO to a concentration of 0.5 mM, then further diluted with water to a final concentration of 50 microM. One stock was prepared in batch for the entire screen and aliquoted. All protein stocks were stored at -80C. Thawing of aliquots on the day of the assay was performed rapidly at room temperature.

Prior to transfer of screening compounds, experimental wells of 384-well assay plates were pre-filled with 37.8 nM of FITC-GIV peptide (for 25 nM final concentration) in a 10 microL volume of assay buffer (50 mM Tris [pH 7.4], 100 mM NaCl, 10 mM MgCl2, 5 mM EDTA, 0.4% NP-40, 30 microM GDP, 1 mM DTT). Control wells were pre-filled with 37.8 nM of FITC-GIV peptide in 10 microL of assay buffer containing either 1% DMSO (vehicle negative control) or 45.3 microM AlCl3+15.1 mM NaF (AlF4- positive control). Each plate contained 16 negative control and 16 positive control wells. Plates were centrifuged at 1000xg for 2 minutes to eliminate bubbling on the surface. Following, 100 nL of experimental compound was pin-transferred into individual wells for each of two replicate assay plates (A&B). After pin-transfer, 5 microL of 3 microM His-tagged rat Galphai3 purified from E. coli (for 1 microM final concentration) was added to each well, and assay plates were shaken at low speed for 5 seconds. Final assay volume was 15 microL. Plates were centrifuged at 1000xg for 2 minutes to eliminate bubbling on the surface and shaken for 10 seconds prior to an incubation of 90 minutes at room temperature. Plates were protected from prolonged light exposure. All manipulations were performed at room temperature.

Assay plates were read with a PerkinElmer Wallac EnVision Multilabel 2103 plate reader using the fluorescent polarization measurement technology with a D505fp/D535 dual mirror and a 480 nm excitation filter. 535 nm emission filters were used for P and S channel reads at 11 mm measurement height with 30 flashes and detector gains of 319 and 563. G-factor 0.96.

Negative control: DMSO
Positive control: Aluminum tetrafluoride (AlF4-, composite of NaF and AlCl3)

Comment: Calculated result values and scoring of active compounds:

Z-score: Indicates the number of standard deviations an experimental condition is from the mean. It is calculated based on plate average (u) and standard deviation (s) of experimental well fluorescence polarization (FP) measurements for each replicate. Z-score (z) is defined as the quotient of the mean of the experimental well population subtracted from an individual well's FP (x), divided by the standard deviation within the experimental wells; z = (x-u)/s.

Normalized percent control: calculated by subtracting plate average positive control FP from experimental well FP, dividing by the difference between plate average negative and positive control FP, and multiplying by 100.

STD: the number of standard deviations from the plate average negative control FP for each replicate experimental well

Compound wells with FP values exceeding +5 standard deviations from the negative control sample average were flagged as potential aggregators or fluorescence quenchers due to their high polarization signal (HighPol) and were excluded from further consideration. Activity scores were calculated by averaging the replicate normalized percent of control values and subtracting from 100 (score based on single replicate if data for other replicate was excluded for any reason). Result values < 0 were set to 0 (no activity) and > 100 were set to 100 (100% activity). Compounds with activity score >= 15 were considered active.

External ID: VSVM-OFFLINE

Protocol: Two uL of HEK293 cell suspension are dispensed at 1000 cells/well into solid white 1536-well plates (Grenier) using a Multidrop Combi (Thermo Scientific). After addition of 23 nL compound by a pin tool (Kalypsys), the plate is incubated 1 h at 37 degrees C and then 3 uL of virus 1:100 dilution VSV-MARV is added. After 28 hr, 4 uL of assay reagent is added and the plates are read using a ViewLux (Perkin Elmer). Assays are performed in sub-saturating amounts of virus (MOI <0.5), therefore luciferase signals reflect the amount (titer) of virus able to infect the cells in presence of the compound.

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: CHEMBL651177

Protocol: N/A

Comment: Compounds with activity <= 10uM or explicitly reported as active by ChEMBL are flagged as active in this PubChem assay presentation.

Journal: J. Med. Chem.
Year: 1999
Volume: 42
Issue: 21
First Page: 4343
Last Page: 4350
DOI: 10.1021/jm991010h

Target ChEMBL ID: CHEMBL1907607
ChEMBL Target Name: GABA-A receptor; anion channel
ChEMBL Target Type: PROTEIN COMPLEX GROUP - Target is a poorly defined protein complex, where subunit composition is unclear (e.g., GABA-A receptor)
Relationship Type: H - Homologous protein target assigned
Confidence: Multiple homologous protein targets may be assigned

External ID: VSVL-OFFLINE

Protocol: For screening, 1000 cells in 2 ul/well were dispensed into white solid 1536-well plates (Greiner) using a solenoid-based dispenser. Following transfer of 23nl compound or DMSO vehicle by a pin tool, 3 ul/well of VSV-LV was added. The plates were centrifuged 1 min at 1000 RPM and then incubated 16 hr at 37 C and 5% CO2. After addition of 4 ul/well SteadyLite (PerkinElmer) detection reagent, the plates were incubated 10 min at ambient temperature and luminescence was measured on a ViewLux (Perkin Elmer) plate reader.

Keywords: NIH Roadmap, MLPCN, MLI, MLSMR, qHTS, NCGC, Lassa virus, luciferase, cell assay, infection

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: FATTTLab-Algae-Lipid

Protocol: Cells were pre-grown to mid-log phase in TAP media. For primary screen, cells were seeded at low density of 500,000 / well in 384-well plate. Compound in DMSO was added to each well at a final concentration of 10 micromolar and cells were allowed to grow for 72 hours. At the end of assay, Nile Red (30 uM f.c.) was added and plates were incubated at 37 C for 60 mins in dark. Fluorescence intensity was measured. Readouts were reported as normalized fold change in the intensity of treated versus control.

Comment: Reference:
1. Wase, N., Tu, B., Black, P. N. & DiRusso, C. C. Phenotypic screening identifies Brefeldin A/Ascotoxin as an inducer of lipid storage in the algae Chlamydomonas reinhardtii. Algal Research 11, 74-84 (2015).

2. Identification and metabolite profiling of chemical activators of lipid accumulation in green algae
#Nishikant Wase, Boqiang Tu, James W Allen, Paul N Black, Concetta C DiRusso
#Plant Physiology Jun 2017, pp.00433.2017; DOI: 10.1104/pp.17.00433
#http://www.plantphysiol.org/content/early/2017/06/26/pp.17.00433

Patent:
DiRusso, C., & Wase, N. (2016). Compounds for Increasing Lipid Synthesis and Storage. United States#NUtech Ventures (Lincoln, NE, US) http://www.freepatentsonline.com/y2016/0312253.html

For additional Information please contact:

Prof. Concetta C. DiRusso
Department of Biochemistry
University of Nebraska-Lincoln
cdirusso2@unl.edu

Nishikant Wase, PhD
Department of Biochemistry
University of Nebraska-Lincoln
nishikant.wase@gmail.com

External ID: epac1-activator-v

Protocol: Briefly, three uL of reagents (100 nM EPAC1, 250 nM RAP1B-BODIPY-GDP, 50 uM GDP) were dispensed into a 1536-well Greiner black solid-bottom medium binding assay plate. Controls and test compounds (23 nL) were transferred to the plate via a Kalypsys pin tool equipped with a 1536-pin array. The plates were centrifuged at 1,000 rpm for 15 seconds followed by 5 minute incubation at room temperature. The assay plates were read at 5 minute intervals for 30 minutes in the ViewLux plate reader using 480nm excitation and 540nm emission filters. The results were normalized to the agonist positive control of 6.5 mM cAMP.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent activators are ranked higher than compounds that showed apparent inhibition.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = 1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 1.2 || ratio.curve_class == 2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds also have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: epac1-inhibitor-v

Protocol: Briefly, three uL of reagents (100 nM EPAC1, 250 nM RAP1B-BODIPY-GDP, 50 uM GDP) were dispensed into a 1536-well Greiner black solid-bottom medium binding assay plate. Controls and test compounds (23 nL) were transferred to the plate via a Kalypsys pin tool equipped with a 1536-pin array. The plates were centrifuged at 1,000 rpm for 15 seconds followed by 5 minute incubation at room temperature. The assay plates were read at 5 minute intervals for 30 minutes in the ViewLux plate reader using 480nm excitation and 540nm emission filters. The results were normalized to the agonist positive control ATA and DMSO.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: HMS1262

Protocol: NEC is stored at -80 degrees at a concentration of 15mg/ml in single use aliquots.

On the day of the screen, 20ul of purified NEC is aliquoted using a Multidrop Combi reagent dispenser into 384 well plates (Corning 3824). 100nl of compound dissolved in DMSO was transferred to each well of the assay plated via pin transfer. The plates (NEC + compound) are incubated at room temperature for 3 hours. Acceptor and donor reagents (CisBio 620/665 pair) are combined then added to each well at 5 microL volumes at a concentration of 8 nM and 80nM respectively. The plates are spun at 1k rpm for 1 min and incubated overnight at 4 degrees, then for one hour the subsequent day at room temperature.

Flourescent measurements are read on the Envision 1 plate reader at ICCB-L. The raw data consists of two fluorescence readings - at 665 nm and 620 nm for the acceptor and donor respectively.

Comment: Data analysis:
The raw data consists of two fluorescence readings - at 665 and 620 nm for the acceptor and donor respectively. The data is processed as a ratio of the emission from the acceptor over the donor (homogeneous time resolved fluorescence ratio). Normalized percent inhibition (NPI) for all experimental wells is calculated based on plate averages for negative and positive control HTRF ratio. Positives are scored as any ratio with a 50% or greater inhibition as compared with the positive control (i.e. NEC + Untagged UL50). To be considered a hit, both replicates need to score as positive. Activity scores are derived from NPI, with 100 = 100% inhibition (> 100% set to 100) and 0 = no inhibition (< 0% set to 0). Note that some compounds with NPI <50% (activity scores < 50) are classified as potential hits based on additional criteria (typically by selecting wells with low ratios compared to other experimental wells on the plate).

External ID: epac2-activator-v2

Protocol: Briefly, three uL of reagents (100 nM EPAC2, 250 nM RAP1B-BODIPY-GDP, 50 uM GDP) were dispensed into a 1536-well Greiner black solid-bottom medium binding assay plate. Controls and test compounds (23 nL) were transferred to the plate via a Kalypsys pin tool equipped with a 1536-pin array. The plates were centrifuged at 1,000 rpm for 15 seconds followed by 5 minute incubation at room temperature. The assay plates were read at 5 minute intervals for 30 minutes in the ViewLux plate reader using 480nm excitation and 540nm emission filters. The results were normalized to the agonist positive control of 6.5 mM cAMP.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent activators are ranked higher than compounds that showed apparent inhibition.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = 1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == 1.2 || ratio.curve_class == 2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds also have PUBCHEM_ACTIVITY_SCORE between 1 and 39.