External ID: TDP1100

Protocol: DT40-hTDP1 cells without 20 nM Camptothecin (add 20 microL of DMSO in 1 L of cell culture medium) were dispensed at 400 cells/5microL/well in tissue culture treated 1536-well white wall/solid bottom assay plates (Greiner Bio-One North America, NC, U.S.A.) using a Multidrop Combi 8 channel dispenser (Thermo Fisher, Waltham, MA, USA). 23 nL compounds and controls were transferred using the pin tool (Kalypsys, San Diego, CA, USA) to the assay plates. The assay plates were then incubated at 37 masculineC for a minimum 48 hr. Three microL of Cell Titer Glo solution was added to the plates and incubated at RT in dark for 30 min. Luminescence was read using ViewLux (Perkin Elmer) with 1 sec exposure slow speed, high gain and 2x binning.

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: Vaccinia-p2mCherry

Protocol: A549 cells were plated at a concentration of approximately 6,000 cells per well in clear-bottom black-walled plates. Compounds were added to the assay plate followed by addition of virus (LREV) that expresses the Venus fluorescent protein early in viral ininfection. During the late viral infection, mCherry was also added to the plate at an MOI of 10 (~ 60,000 plaque forming units (PFU) of virus). Following virus addition, plates were incubated in a tissue-culture incubator for 12-18 hours. At increasing times postinfection, fluorescence from both Venus and mCherrry was determined using a plate-reader and standard conditions for observing Venus fluorescence (EX515/EM530) and mCherry fluorescence (EX587/EM610). In each plate, positive controls (virus infection in the presence of 1% DMSO only) and an inhibitory drug control (AraC at 500 nM) was included and used to normalize the data.

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: TDP1101

Protocol: DT40-hTDP1 cells with 20 nM Camptothecin (add 20 microL of 1 mM CPT stock in 1 L of cell culture medium) were dispensed at 400 cells/5microL/well in tissue culture treated 1536-well white wall/solid bottom assay plates (Greiner Bio-One North America, NC, U.S.A.) using a Multidrop Combi 8 channel dispenser (Thermo Fisher, Waltham, MA, USA). 23 nL compounds and controls were transferred using the pin tool (Kalypsys, San Diego, CA, USA) to the assay plates. The assay plates were then incubated at 37 masculineC for a minimum 48 hr. Three microL of Cell Titer Glo solution was added to the plates and incubated at RT in dark for 30 min. Luminescence was read using ViewLux (Perkin Elmer) with 1 sec exposure slow speed, high gain and 2x binning.

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: HMS1315

Protocol: Cybrid cells were washed with PBS, trypsinized, spun down at 300g for 5 minutes, and resuspended in 10 mLs of PBS. Cells were counted, and the appropriate amount of cells were added to a vial containing DMEM (No Glucose) + 2%FBS + 1% P/S + 10mM Galactose, DMEM (No Glucose) + 2%FBS + 1% P/S + 10mM Galactose + 0.3% DMSO, DMEM No Glucose + 2% FBS + 1% P/S + 10mM Galactose + 1uM I-BET GSK 525762A, or DMEM (No Glucose) + 2%FBS + 1% P/S + 10mM Galactose + 1.25mM Glucose. Cells were then seeded in a Corning 3570 384-well plate (40 ul/well,1500 cells/well). Two replicates were prepared as described at the same time per library plate.

100 nl of compound was added to each well via pin transfer immediately after seeding. After the addition of compound, cells were incubated for 72 hours at 37 degrees C with 5% CO2.

Following the 72 hour incubation period, the 384 well plates were centrifuged for 1 minute at 1000 rpm. The media was aspirated using an aspiration wand and fresh media DMEM only, was added to the cells (40uL/ well) using a well-mate. Fifteen-microliters of Cell Titer Glow substrate was then added to each well using the well-mate. The plates were gently vortexed for 10 seconds and then centrifuged for 1 minute at 1000 rpm. The plates were then immediately read on the Envision instrument and the luminescence was detected for each individual well.

Positive control (strong): Cells seeded in DMEM (No Glucose) + 2%FBS + 1% P/S + 10mM Galactose + 1.25mM Glucose
Positive control (weak): Cells seeded in DMEM No Glucose + 2% FBS + 1% P/S + 10mM Galactose + 1uM I-BET GSK 525762A
Negative control: Cells seeded in DMEM (No Glucose) + 2%FBS + 1% P/S + 10mM Galactose + 0.3% DMSO

Comment: Data analysis method and criteria for scoring active compounds:

Z-scores were calculated for both replicates separately using the plate average and standard deviation of experimental well luminescence (Z = (x - mu)/sigma). Compounds were considered active if both replicate Z-scores >= 1.8. Activity scores were determined by scaling replicate average Z-scores from 0 (activity score = 0) to 4 (activity score = 100), with activity score > 45 being considered active. Z-scores < 0 were set to activity score = 0; Z-scores > 4 were set to activity score = 100 (100% activity).

External ID: CGM data for Cell Systems paper Dec 2015

Protocol: Yeast strains and Media:
All S. cerevisiae deletion strains were obtained from the Euroscarf deletion collection. The wild type parental strain for this collection is BY 4741 MATa his31 leu20 met150 ura30. An isogenic pdr1pdr3 strain (MT2481) was created using PDR1::nat and PDR::URA3 deletion cassettes. All strains were grown and screened in synthetic complete (SC) medium with 2% glucose.

Handling:
Strains were seeded at 50,000 cells per well in a volume of 100 L in 96 well plates followed by addition of 2 L of 1 mM compound stock for final concentration of 20 M. Screens were conducted in technical duplicate using a Biomek FX liquid handling workstation with an integrated stacker carousel. DMSO solvent only controls and 10 uM cycloheximide positive controls were seeded in columns 1 and 12 of each assay plate. Plates were incubated at 30 C without shaking for approximately 18 h or until culture saturation was achieved for the solvent controls. Cultures were resuspended by shaking on the robotic platform prior to reading OD600 values on either Tecan M1000 or Tecan Sunrise plate readers.

Analysis procedure:
All data was subjected to the following workflow:
1. Consistent spatial effects on growth across plates were corrected by Lowess regression using an empirically estimated sliding window of 1/3 and normalized based on plate median.
2. If more than 30% of compounds were active within a plate, data was normalized to DMSO controls.
3. Median normalization was applied to all plates and experiments.
4. Z-factors for growth inhibition were calculated using the median and the interquartile range (IQR) by fitting a normal distribution with N(1,IQR) to the experimental data. In addition, we calculated the Z-factor, percent inhibition and normalized OD values for manual validation.
5. Data points with high variation between replicates (> 3 MAD) were removed as inconsistent outliers.

BioAssay submission file header:

Pubchem_ext_datasource_regid: compound identifier used in on chemgrid.org/cgm
Orf yeast gene deletion (open reading frame)
Sym# yeast gene deletion gene symbol
Raw OD read 1 first replicate
Raw OD read 2 second replicate
Normalized OD average normalized read based on workflow described above
Z_score Z-Score calculated based on kernel density distribution from normalized average reads per screen
P_value p-value calculated based on kernel density distribution calculated from average reads per screen
Non replicate test for non-replicates between first and second replicate
Pubchem_activity_outcome pubchem activity outcome
Cryptagen if compound identifier fulfilled cryptagen rule of activity in at least 4 and not more than 2/3rds of screens per library
Bioactivity sensitive if compound decreases fitness or resistant if compound increases fitness compared to negative control

Comment:

External ID: IucA Pilot Assay Tocris Library

Protocol: A solution containing 55.6 mM HEPES pH 7.5, 0.11% Tween 20, 16.7 mM MgCl2, 55.6 mM hydroxylamine, 55.6 microM ATP, 55.6 microM citrate, and 0.28 U/mL IPP was dispensed (45 microL) into clear polystyrene microplates (Corning, Inc.) using a BioTek MicroFlo dispenser.

Next, 40 nL of test compounds (10 mM in DMSO, 8 microM final concentration) were transferred from deep-well blocks to the reaction solution using a stainless-steel pin tool operated by a robotic workstation (JANUS, PerkinElmer, Waltham, MA). The IucA-catalyzed reaction was initiated by adding 5 microL of 3 microM IucA in 25 mM HEPES, 75 mM NaCl, and 0.1 mM TCEP at pH 7.5.

The reactions were allowed to proceed for 30 min at room temperature before being quenched by dispensing (microFill, BioTek) 13 microL of MG developing solution, containing 1.0 mg/mL MG oxalate, 1.5% (w/v) ammonium molybdate, 0.15% (v/v) Tween 20, and 4.7 N sulfuric acid. After allowing the assay color to develop/stabilize for 30 min, the absorbance at 620 nm was measured (EnVision 2103 Multilabel Microplate Reader, PerkinElmer).

Average positive controls from 24 wells with no test compound and average negative controls from 8 wells with no enzyme were calculated. Dynamic range was calculated by difference between Avg Pos Control and Avg Neg Control. Percent inhibition was calculated by the ratio of (Avg. Pos. Ctrl - Sample OD) to Dynamic Range.

Comment: Protein Target is
IucA

EMB09144
574 aa
G057_19877
Klebsiella pneumoniae hvKP1

Active compounds were defined by <80% activity at 8 microM screening concentration.

External ID: Vaccinia-p2Venus

Protocol: A549 cells were plated at a concentration of approximately 6,000 cells per well in clear-bottom black-walled plates. Compounds were added to the assay plate followed by addition of virus (LREV) that expresses the Venus fluorescent protein early in viral infection. During the late viral infection, mCherry was also added to the plate at an MOI of 10 (~ 60,000 plaque forming units (PFU) of virus). Following virus addition, plates were incubated in a tissue-culture incubator for 12-18 hours. At increasing times post-infection, fluorescence from both Venus and mCherrry was determined using a plate-reader and standard conditions for observing Venus fluorescence (EX515/EM530) and mCherry fluorescence (EX587/EM610). In each plate, positive controls (virus infection in the presence of 1% DMSO only) and an inhibitory drug control (AraC at 500 nM) was included and used to normalize the data.

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: HMS1149-MLP

Protocol: A 558 bp region upstream of hspX was PCR amplified and cloned upstream of the GFP-mut2 (Cormack et al., 1996). This construct was cloned into a modified version of the replicating plasmid pSE100 and transformed into CDC1551 to generate CDC1551(hspX'::GFP).

The M. tuberculosis CDC 1551 (hspX'::GFP) fluorescent biosensor was grown in pH 7.0 Middlebrook 7H9 medium to mid- to late-log phase. Black-walled, clear-bottom, tissue-culture treated 384-well microtiter plates (Corning #3712) were filled with 25 uL of buffered pH 7.0 7H9 medium using a Matrix Combi. 100 nL of compound was then transferred to each well via stainless steel pin array. Plates were manually sealed with DMSO-resistant aluminum seals and frozen at -80C until they were ready to be screened. The cultures were re-suspended in pH 7.0 7H9 and 25 uL was dispensed into each well of the 384-well assay plates already containing the perturbator utilizing a Cy-Bio Selma liquid handler robot to an OD595 of 0.05. The plates were then placed in a Ziploc bag with a moistened paper towel (to limit evaporation) and incubated for 6 days at 37C. Fluorescence and optical density (OD) readings were made on an EnSpire plate reader (Perkin Elmer, Inc.) at excitation and emission wavelengths of 488 and 509 nm as a top read, with the OD being taken at 595 nm as a bottom read.

The ~328,633 compound library was arrayed into black-walled, clear-bottom tissue-culture treated 384-well microtiter plates (Corning #3712) by pin transfer (100 nL), containing 25 uL of buffered pH 7.0 7H9 medium. In a previous screen utilizing the same compound library and screening method, four random compound plates were screened in duplicate to observe variation in hit robustness across plates and method. The result was that the duplicate plates did not vary in a statistically significant manner and due to the high volume of compounds to be screened (~328,633), replicates were not utilized.

Negative control: DMSO, 0.1% final concentration in buffered pH 7.0 7H9 in column 2 or column 23 of each plate

Positive control: 0.3 uM Rifampicin final concentration in buffered pH 7.0 7H9 in column 1 or column 24 of each plate

Comment: Analysis methods:
To calculate normalized fluorescence percent inhibition, plate average negative control fluorescence intensity (based on all plates within a screening run) was subtracted from well fluorescence intensity, divided by the difference between plate negative and positive control average fluorescence intensity (based on all plates within a screening run), and multiplied by 100. To calculate normalized growth inhibition, plate average negative control absorbance (based on all plates within a screening run) was subtracted from well absorbance, divided by the difference between plate negative and positive control average absorbance (based on all plates within a screening run), and multiplied by 100. Normalized fluorescence percent inhibition was divided by normalized growth inhibition to calculate a ratio. Wells were considered active if growth was not greatly decreased and showed either a 3-fold selectivity fluorescence to growth inhibition ratio (with 35-45% fluorescence inhibition) or a 1.5-fold selectivity fluorescence to growth inhibition ratio (with > 45% fluorescence inhibition). These compounds may be directly or indirectly inhibiting DosRS signaling. Wells were considered general inhibitors of M. tuberculosis growth if both fluorescence and growth inhibition > 50%. Activity scores were scaled from 100 to 0 and derived from normalized fluorescence percent inhibition, with 100 (or > 100) = 100% inhibition and 0 (or < 0) = no inhibition.

External ID: CHEMBL4808149

Protocol: N/A

Comment: Target ChEMBL ID: CHEMBL1865
ChEMBL Target Name: Histone deacetylase 6
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

Data Source: Fraunhofer Institute HDAC6 screening

External ID: CHEMBL4808150

Protocol: N/A

Comment: Target ChEMBL ID: CHEMBL1865
ChEMBL Target Name: Histone deacetylase 6
ChEMBL Target Type: SINGLE PROTEIN - Target is a single protein chain
Relationship Type: D - Direct protein target assigned
Confidence: Direct single protein target assigned

Data Source: Fraunhofer Institute HDAC6 screening

External ID: stopgo-p2-SytraCBC-dual-FF

Protocol: Reagents:
StopGo2A HEK-NPG-Luc cells and other necessary media and controls were provided by Dr. Atkins's lab. Compound PTC124 was used as a control. Dose response was assessed using a 1:2 dilution of control compound, with the top dose of 50uM final concentration. Background signal was normalized to wells treated with DMSO only.

Assay Protocol:
In brief, four microliters (2400 cells/well) of StopGo2A HEK-NPG-Luc cells were plated and incubated overnight at 37C. Twenty-three nanoliters of compounds and control were added to the wells using a 1536 array Kalypsys pintool workstation. After an over night incubation (at 37C) with compounds / control, 2.5 uL of Dual/Glo Firefly reagent was added. Firefly luciferase signal was obtained using the PerkinElmer ViewLux plate reader after 20min of room temperature incubation. Dual/Glo Renilla Lucifrase reagents were then added followed by additional 20 min room temperature incubation. Finally, the renilla luciferase signal was obtained using the PerkinElmer ViewLux reader.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: stopgo-p2-SytraCBC-dual-Ren

Protocol: Reagents:
StopGo2A HEK-NPG-Luc cells and other necessary media and controls were provided by Dr. Atkins's lab. Compound PTC124 was used as a control. Dose response was assessed using a 1:2 dilution of control compound, with the top dose of 50uM final concentration. Background signal was normalized to wells treated with DMSO only.

Assay Protocol:
In brief, four microliters (2400 cells/well) of StopGo2A HEK-NPG-Luc cells were plated and incubated overnight at 37C. Twenty-three nanoliters of compounds and control were added to the wells using a 1536 array Kalypsys pintool workstation. After an overnight incubation (at 37C) with compounds / control, 2.5 uL of Dual/Glo Firefly reagent was added. Firefly luciferase signal was obtained using the PerkinElmer ViewLux plate reader after 20min of room temperature incubation. Dual/Glo Renilla Lucifrase reagents were then added followed by additional 20 min room temperature incubation. Finally, the renilla luciferase signal was obtained using the PerkinElmer ViewLux reader.

Comment: Disclaimer:
Although all reasonable efforts have been made to ensure the accuracy and reliability of the data, caution should be exercised when interpreting the results as artifacts are possible from nonspecific effects such as assay signal interference. The curve fitting and activity calls presented here are based on the NCATS analysis methods.

Compound Ranking:
1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, with a ratio activity curve class of 4, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. For a ratio activity curve class = -1.1, score = 80+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 && abs(ratio.max_response) > 6*10, score = 60+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -2.1 || ( ratio.curve_class==-2.2 && abs(ratio.max_response) > 6*10), score = 40+abs((log_ac50+4.5)*inf_activity/20). For ratio.curve_class == -1.2 || ratio.curve_class == -2.2, score = 20+abs((log_ac50+4.5)*inf_activity/20). Inconclusive compounds, with a donor curve class other than 4, have PUBCHEM_ACTIVITY_SCORE of 10. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39.

External ID: VSVM-OFFLINE

Protocol: Two uL of HEK293 cell suspension are dispensed at 1000 cells/well into solid white 1536-well plates (Grenier) using a Multidrop Combi (Thermo Scientific). After addition of 23 nL compound by a pin tool (Kalypsys), the plate is incubated 1 h at 37 degrees C and then 3 uL of virus 1:100 dilution VSV-MARV is added. After 28 hr, 4 uL of assay reagent is added and the plates are read using a ViewLux (Perkin Elmer). Assays are performed in sub-saturating amounts of virus (MOI <0.5), therefore luciferase signals reflect the amount (titer) of virus able to infect the cells in presence of the compound.

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.

External ID: VSVL-OFFLINE

Protocol: For screening, 1000 cells in 2 ul/well were dispensed into white solid 1536-well plates (Greiner) using a solenoid-based dispenser. Following transfer of 23nl compound or DMSO vehicle by a pin tool, 3 ul/well of VSV-LV was added. The plates were centrifuged 1 min at 1000 RPM and then incubated 16 hr at 37 C and 5% CO2. After addition of 4 ul/well SteadyLite (PerkinElmer) detection reagent, the plates were incubated 10 min at ambient temperature and luminescence was measured on a ViewLux (Perkin Elmer) plate reader.

Keywords: NIH Roadmap, MLPCN, MLI, MLSMR, qHTS, NCGC, Lassa virus, luciferase, cell assay, infection

Comment: Compound Ranking:

1. Compounds are first classified as having full titration curves, partial modulation, partial curve (weaker actives), single point activity (at highest concentration only), or inactive. See data field "Curve Description". For this assay, apparent inhibitors are ranked higher than compounds that showed apparent activation.
2. For all inactive compounds, PUBCHEM_ACTIVITY_SCORE is 0. For all active compounds, a score range was given for each curve class type given above. Active compounds have PUBCHEM_ACTIVITY_SCORE between 40 and 100. Inconclusive compounds have PUBCHEM_ACTIVITY_SCORE between 1 and 39. Fit_LogAC50 was used for determining relative score and was scaled to each curve class' score range.