中文名 | 环戊二烯铟(I) |
---|---|
英文名 | cyclopentadienylindium (i) |
沸点 | 50ºC 0,01mm |
---|---|
分子式 | C5H5In |
分子量 | 179.91100 |
精确质量 | 179.94300 |
LogP | 1.02150 |
储存条件 | 密闭于阴凉干燥环境中 |
稳定性 | 遵照规定使用和储存则不会分解。 |
分子结构 | 1、摩尔折射率:无可用 2、 摩尔体积(cm3/mol):无可用 3、 等张比容(90.2K):无可用 4、 表面张力(dyne/cm):无可用 5、 极化率:无可用 |
更多 | 1. 性状:无可用 2. 密度(g/mL,25/4℃):无可用 3. 相对蒸汽密度(g/mL,空气=1):无可用 4. 熔点(ºC):无可用 5. 沸点(ºC,常压):50/0.01mm 6. 沸点(ºC,5.2kPa):无可用 7. 折射率:无可用 8. 闪点(ºC):无可用 9. 比旋光度(º):无可用 10. 自燃点或引燃温度(ºC):无可用 11. 蒸气压(kPa,25ºC):无可用 12. 饱和蒸气压(kPa,60ºC):无可用 13. 燃烧热(KJ/mol):无可用 14. 临界温度(ºC):无可用 15. 临界压力(KPa):无可用 16. 油水(辛醇/水)分配系数的对数值:无可用 17. 爆炸上限(%,V/V):无可用 18. 爆炸下限(%,V/V):无可用 19. 溶解性:无可用 |
Section 1: Product Identification Cyclopentadienylindium (I), elec. gr. (99.99+%-In) PURATREM, 97-3425, contained in 50 ml Swagelok® Chemical Name: cylinder (96-1070) for CVD/ALD CAS Registry Number:34822-89-4 Formula:C5H5In EINECS Number:none
Chemical Family:metallocene Synonym:Indium, Permethylcyclopentadienyl Section 2: Composition and Information on Ingredients IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL) Title compound34822-89-4100%0.1mg/m3 (as In)no data Section 3: Hazards Identification Emergency Overview:May be irritating to, skin, eyes and mucous membranes. May be harmful if swallowed. Primary Routes of Exposure:Ingestion, inhalation, skin, eyes Eye Contact:May cause irritation of the eyes. Skin Contact:May cause slight to mild irritationof the skin. Inhalation:May be irritaitng to the nose, mucous membranes and respiratory tract. Ingestion:No information available on the physiological effects of ingestion. Acute Health Affects:May be irritaitng to the nose, mucous membranes and respiratory tract. Chronic Health Affects:No information on long-term chronic effects. NTP:No IARC:No OSHA:No SECTION 4: First Aid Measures Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need Eye Exposure: assistance in keeping their eye lids open. Get immediate medical attention. Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if Skin Exposure: irritation persists. Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty Inhalation: in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance. Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce Ingestion: vomiting only if directed by medical personnel. SECTION 5: Fire Fighting Measures Flash Point:not applicable Autoignition Temperature:no data Explosion Limits:no data Extinguishing Medium:carbon dioxide or dry powder If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure Special Fire Fighting Procedures: self-contained breathing apparatus and full protective clothing. Hazardous Combustion andIf involved in a fire, this material may release irritating fumes of indium oxide. Decomposion Products: Unusual Fire or Explosion Hazards: Highly flammable. Formation of explosive air/dust mixtures is possible. SECTION 6: Accidental Release Measures Small spills can be mixed with vermiculite, sodium carbonate or other suitable non-combustible adsorbent and Spill and Leak Procedures: swept up. SECTION 7: Handling and Storage Handle and store the material under an inert atmosphere of nitrogen or argon. Keep in a cool, dry Handling and Storage: well-ventilated area. SECTION 8: Exposure Controls and Personal Protection Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory. Skin Protection:Wear protective clothing and gloves. Consult with glove manufacturer to determine the proper type of glove. Ventilation:Handle the material in an efficient fume hood. If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Respirator: Protection Program to be in compliance with 29 CFR 1910.134. Ventilation:Handle the material in an efficient fume hood. Additional Protection:No additional protection required. SECTION 9: Physical and Chemical Properties Color and Form:off-white xtl. Molecular Weight:179.92 Melting Point:no data Boiling Point:subl. 50°C /0.01 mm Vapor Pressure:no data Specific Gravity:no data Odor:none Solubility in Water:insoluble SECTION 10: Stability and Reactivity Stability:air sensitive, heat sensitive, light sensitive Hazardous Polymerization:no hazardous polymerization Conditions to Avoid:contact with air Incompatibility:oxidizing agents, mineral acids, halogens Decomposition Products:carbon dioxide, carbon monoxide, organic fumes and indium oxide. SECTION 11: Toxicological Information RTECS Data:No information available from the RTECS files. Carcinogenic Effects:no data Mutagenic Effects:no data Tetratogenic Effects:no data SECTION 12: Ecological Information Ecological Information:No information available. SECTION 13: Disposal Considerations Disposal:Dispose of this material according to local, state and federal regulations. SECTION 14: Transportation Shipping Name (CFR):Flammable solids, Organic, N.O.S. Hazard Class (CFR):4.1 Additional Hazard Class (CFR):NA Packaging Group (CFR):II UN ID Number (CFR):UN# 1325 Shipping Name (IATA):Flammable solid, Organic, N.O.S. Hazard Class (IATA):4.1 Additional Hazard Class (IATA):NA Packaging Group (IATA):II UN ID Number (IATA):UN# 1325 SECTION 15: Regulatory Information TSCA:Not listed in the TSCA inventory SARA (Title 313):Not reportable under SARA Title 313. Second Ingredient:none SECTION 16 - ADDITIONAL INFORMATION N/A |
生态学数据: 该物质对环境可能有危害,对水体应给予特别注意。
|