中文名 | 1-碘代戊炔 |
---|---|
英文名 | 1-Pentynyl Iodide |
中文别名 | 1-碘-1-戊炔 |
英文别名 |
1-Iodo-1-pentyne
1-Pentyne, 1-iodo- 1-Iodopent-1-yne |
密度 | 1.7±0.1 g/cm3 |
---|---|
沸点 | 157.5±9.0 °C at 760 mmHg |
分子式 | C5H7I |
分子量 | 194.014 |
闪点 | 58.8±14.2 °C |
精确质量 | 193.959229 |
LogP | 4.09 |
外观性状 | 液体;White to Yellow to Green clear liquid |
蒸汽压 | 3.5±0.3 mmHg at 25°C |
折射率 | 1.552 |
储存条件 | 室温 |
分子结构 | 五、分子性质数据: 1、 摩尔折射率:36.18 2、 摩尔体积(m3/mol):113.2 3、 等张比容(90.2K):283.2 4、 表面张力(dyne/cm):39.1 5、 极化率(10-24cm3):14.34 |
计算化学 | 1.疏水参数计算参考值(XlogP):2.7 2.氢键供体数量:0 3.氢键受体数量:0 4.可旋转化学键数量:1 5.互变异构体数量:无 6.拓扑分子极性表面积0 7.重原子数量:6 8.表面电荷:0 9.复杂度:72.4 10.同位素原子数量:0 11.确定原子立构中心数量:0 12.不确定原子立构中心数量:0 13.确定化学键立构中心数量:0 14.不确定化学键立构中心数量:0 15.共价键单元数量:1 |
更多 | 1.性状:可燃性液体 2.密度(g/mL,25/4℃):1.67 3.相对蒸汽密度(g/mL,空气=1):未确定 4.熔点(ºC):未确定 5.沸点(ºC,常压):53 6.沸点(ºC,5.2kPa):未确定 7.折射率:未确定 8.闪点(ºC):未确定 9.比旋光度(º):未确定 10.自燃点或引燃温度(ºC):未确定 11.蒸气压(kPa,25ºC):未确定 12.饱和蒸气压(kPa,60ºC):未确定 13.燃烧热(KJ/mol):未确定 14.临界温度(ºC):未确定 15.临界压力(KPa):未确定 16.油水(辛醇/水)分配系数的对数值:未确定 17.爆炸上限(%,V/V):未确定 18.爆炸下限(%,V/V):未确定 19.溶解性:未确定 |
1-Pentynyl Iodide
Revision number: 5
SAFETY DATA SHEET Section1. IDENTIFICATION Product name:1-Pentynyl Iodide Revision number:5 Section2. HAZARDS IDENTIFICATION GHS classification PHYSICAL HAZARDS Category 3 Flammable liquids HEALTH HAZARDSNot classified Not classified ENVIRONMENTAL HAZARDS GHS label elements, including precautionary statements Pictograms or hazard symbols Signal wordWarning Hazard statementsFlammable liquid and vapour Precautionary statements: [Prevention]Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed. Use explosion-proof electrical/ventilating/lighting equipment. Take precautionary measures against ignition by the static discharge and the spark. Wear protective gloves/eye protection/face protection. [Response]IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. [Storage]Store in a well-ventilated place. Keep cool. Dispose of contents/container through a waste management company authorized by [Disposal] the local government. Section3. COMPOSITION/INFORMATION ON INGREDIENTS Substance/mixture:Substance Components:1-Pentynyl Iodide Percent:>97.0%(GC) CAS Number:14752-61-5 Synonyms:1-Iodo-1-pentyne C5H7I Chemical Formula: Section4. FIRST AID MEASURES Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell. 1-Pentynyl Iodide Section4. FIRST AID MEASURES Skin contact:Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation or rash occurs: Get medical advice/attention. Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Ingestion:Get medical advice/attention if you feel unwell. Rinse mouth. A rescuer should wear personal protective equipment, such as rubber gloves and air- Protection of first-aiders: tight goggles. Section5. FIRE-FIGHTING MEASURES Suitable extinguishingDry chemical, foam, water spray, carbon dioxide. media: Unsuitable extinguishing Solid streams of water media: Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to from the chemical:generate poisonous fume. Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by spraying with water. Eliminate all ignition sources if safe to do so. Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment. equipment for firefighters: Section6. ACCIDENTAL RELEASE MEASURES Personal precautions,Use personal protective equipment. Keep people away from and upwind of spill/leak. protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled emergency procedures: around the leakage area by roping off, etc. Environmental precautions: Prevent product from entering drains. Methods and materials for Absorb spilled material in dry sand or inert absorbent before recovering it into an containment and cleaning airtight container. In case of large amount of spillage, contain a spill by bunding. up: Adhered or collected material should be promptly disposed of, in accordance with appropriate laws and regulations. Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in hazards:case of a fire. Use spark-proof tools and explosion-proof equipment. Section7. HANDLING AND STORAGE Precautions for safe handling Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment. Prevent generation of vapour or mist. Keep away from heat/sparks/open flame/hot surfaces. -No smoking. Take measures to prevent the build up of electrostatic charge. Use explosion-proof equipment. Wash hands and face thoroughly after handling. Use a closed system if possible. Use a ventilation, local exhaust if vapour or aerosol will be generated. Advice on safe handling: Avoid contact with skin, eyes and clothing. Conditions for safe storage, including any incompatibilities Storage conditions:Keep container tightly closed. Store in a cool, dark and well-ventilated place. Store away from incompatible materials such as oxidizing agents. Packaging material:Comply with laws. Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering controls:Install a closed system or local exhaust. Also install safety shower and eye bath. Personal protective equipment Respiratory protection: Vapor respirator. Follow local and national regulations. Hand protection:Protective gloves. 1-Pentynyl Iodide Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION Eye protection:Safety glasses. A face-shield, if the situation requires. Skin and body protection: Protective clothing. Protective boots, if the situation requires. Section9. PHYSICAL AND CHEMICAL PROPERTIES Physical state (20°C):Liquid Form:Clear Very pale yellow - Yellow Colour: Odour:No data available pH: No data available Melting point/freezing point:No data available Boiling point/range:53°C/2.9kPa Flash point:No data available Flammability or explosive limits: Lower:No data available Upper:No data available Relative density:1.67 Solubility(ies): [Water]No data available [Other solvents]No data available Section10. STABILITY AND REACTIVITY Chemical stability:Stable under proper conditions. Possibility of hazardous No special reactivity has been reported. reactions: Spark, Open flame, Static discharge Conditions to avoid: Incompatible materials: Oxidizing agents Hazardous decomposition Carbon monoxide, Carbon dioxide, Hydrogen Iodide products: Section11. TOXICOLOGICAL INFORMATION Acute Toxicity:No data available Skin corrosion/irritation: No data available Serious eyeNo data available damage/irritation: Germ cell mutagenicity: No data available Carcinogenicity: IARC =No data available NTP =No data available Reproductive toxicity:No data available Section12. ECOLOGICAL INFORMATION Ecotoxicity: Fish:No data available No data available Crustacea: Algae:No data available Persistence / degradability: No data available BioaccumulativeNo data available potential(BCF): Mobility in soil Log Pow:No data available Soil adsorption (Koc):No data available No data available Henry's Law constant(PaM3/mol): 1-Pentynyl Iodide Section13. DISPOSAL CONSIDERATIONS Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when disposing of the substance. Section14. TRANSPORT INFORMATION Hazards Class:3: Flammable liquid. UN-No:1993 Proper shipping name:Flammable liquid, n.o.s. III Packing group: Section15. REGULATORY INFORMATION Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002 and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were prescribed. SECTION 16 - ADDITIONAL INFORMATION N/A |
~92% 14752-61-5 |
文献:Zhu, Lizhi; Minto, Robert E. Tetrahedron Letters, 2001 , vol. 42, # 23 p. 3803 - 3805 |
~% 14752-61-5 |
文献:Chemische Berichte, , vol. 87, p. 1148,1153 |
~% 14752-61-5 |
文献:Journal of the Chemical Society, Perkin Transactions 2: Physical Organic Chemistry (1972-1999), , p. 1605 - 1610 |
~% 14752-61-5 |
文献:Journal of the Chemical Society, Perkin Transactions 2: Physical Organic Chemistry (1972-1999), , p. 1605 - 1610 |
~% 14752-61-5 |
文献:Journal of the Chemical Society, Perkin Transactions 2: Physical Organic Chemistry (1972-1999), , p. 1605 - 1610 |
~% 14752-61-5 |
文献:Journal of the Chemical Society, Perkin Transactions 2: Physical Organic Chemistry (1972-1999), , p. 1605 - 1610 |
~% 14752-61-5 |
文献:Journal of the Chemical Society, Perkin Transactions 2: Physical Organic Chemistry (1972-1999), , p. 1605 - 1610 |
~% 14752-61-5 |
文献:Annales de Chimie (Cachan, France), , vol. <10> 5, p. 20 |
~% 14752-61-5 |
文献:Justus Liebigs Annalen der Chemie, , vol. 573, p. 115,120 |
上游产品 8 | |
---|---|
下游产品 4 | |
海关编码 | 2903399090 |
---|---|
中文概述 | 2903399090. 其他无环烃的氟化、溴化或碘化衍生物. 增值税率:17.0%. 退税率:13.0%. 监管条件:无. 最惠国关税:5.5%. 普通关税:30.0% |
申报要素 | 品名, 成分含量, 用途 |
Summary | 2903399090. brominated,fluorinated or iodinated derivatives of acyclic hydrocarbons. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:5.5%. General tariff:30.0% |