indium perchlorate

Modify Date: 2024-01-19 09:27:01

indium perchlorate Structure
indium perchlorate structure
Common Name indium perchlorate
CAS Number 13465-15-1 Molecular Weight 557.29200
Density N/A Boiling Point 200ºC
Molecular Formula Cl3H16InO20 Melting Point 80°C
MSDS N/A Flash Point N/A

 Names

Name indium perchlorate
Synonym More Synonyms

 Chemical & Physical Properties

Boiling Point 200ºC
Melting Point 80°C
Molecular Formula Cl3H16InO20
Molecular Weight 557.29200
Exact Mass 555.83400
PSA 296.65000
LogP 0.12850
Appearance of Characters crystal | white
Water Solubility It is soluble in water.

 MSDS


Section 1: Product Identification
Chemical Name:Indium (III) perchlorate octahydrate (99.9%-In)
CAS Registry Number:13465-15-1
Formula:In(ClO4)3.8H2O
EINECS Number:none
Chemical Family:metal perchlorate salt
Synonym:Perchloric acid, Indium(III) salt, octahydrate

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title Compound13465-15-1100%0.1mg/m3no data

Section 3: Hazards Identification
Emergency Overview:Irritating to eyes, skin and respiratory tract. May be harmful if swallowed.
Primary Routes of Exposure:Ingestion
Eye Contact:Causes moderate irritation of the eyes.
Skin Contact:Causes moderate irritation of the skin.
Inhalation:Irritating to the nose, mucous membranes and respiratory tract.
No specific information is available on the physiological effects of ingestion. May cause gastrointestinal
Ingestion:
irritation, nausea, and vomiting.
Acute Health Affects:Irritating to skin, eyes and respiratory tract.
Chronic Health Affects:Perchlorates reversibly inhibit thyroid iodine uptake. Kidney function may be affected.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:no data
Autoignition Temperature:no data
Explosion Limits:no data
Extinguishing Medium:Water spray
Spray closed containers with water until fire is out. Avoid contact with combustible material. Fire fighters
Special Fire Fighting Procedures:
should be equipped with a NIOSH approved self-contained breathing apparatus.
Hazardous Combustion andIf involved in a fire this material may emit corrosive hydrogen chloride fumes.
Decomposion Products:
Releases oxygen on heating. May decompose explosively under fire fighting conditions. Do not mix with
Unusual Fire or Explosion Hazards:
combustibles.

SECTION 6: Accidental Release Measures
Do not mix spilled powder with any combustible materials, such as sawdust. Sweep up the solid and dilute
Spill and Leak Procedures:
with water.

SECTION 7: Handling and Storage
Handling and Storage:Store in a tightly sealed container in a cool dry place away from combustible and flammable materials.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear protective clothing and gloves.
Ventilation:If possible, handle the material in an efficient fume hood.
If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
Respirator:
Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:If possible, handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:white xtl.
Molecular Weight:413.17 (557.26)
Melting Point:~80°
Boiling Point:200°C dec.
Vapor Pressure:not applicable
Specific Gravity:no data
Odor:none
Solubility in Water:very soluble

SECTION 10: Stability and Reactivity
Stability:Air and moisture stable solid
Hazardous Polymerization:no hazardous polymerization
Conditions to Avoid:Any contact with combustible matter.
Incompatibility:Reducing agents, organic matter, active metals, phosphorus, sulfur, hydrazine, hydroxylamine, strong acids
Decomposition Products:Oxygen, Indium oxide, hydrogen chloride,

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:No data available
Mutagenic Effects:No data available
Tetratogenic Effects:No data available

SECTION 12: Ecological Information
Ecological Information:No data available

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):Perchlorates, Inorganic, N.O.S.
Hazard Class (CFR):5.1
Additional Hazard Class (CFR):NA
Packaging Group (CFR):II
UN ID Number (CFR):UN# 1481
Shipping Name (IATA):Perchlorates, Inorganic, N.O.S.
Hazard Class (IATA):5.1
Additional Hazard Class (IATA):NA
Packaging Group (IATA):II
UN ID Number (IATA):UN# 1481

SECTION 15: Regulatory Information
TSCA:Not listed in the TSCA inventory.
SARA (Title 313):Title compound not listed.
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

RIDADR UN1481
Packaging Group II
Hazard Class 5.1

 Synonyms

Indiumperchlorateoctahydratewhitextl
INDIUM(III) PERCHLORATE
Indium(III) perchlorate octahydrate (metals basis)
EINECS 236-874-7
Indium(III) perchlorate octahydrate
Indium (III) perchlorate octahydrate (-In)
MFCD00150241